Lexus ES250 (2023 year). Manual in english — page 3
54
1-2. Child safety
Outboard rear seats
Hook
Top tether strap
Rear center seat
Hook
Top tether strap
■
Laws and regulations pertaining to
anchors
The LATCH system conforms to
FMVSS225 or CMVSS210.2.
Child restraint systems conforming to
FMVSS213 or CMVSS213 specifications
can be used.
This vehicle is designed to conform to SAE
J1819.
WARNING
■
When installing a child restraint sys-
tem
Observe the following precautions.
Failure to do so may result in death or
serious injury.
A
B
A
B
●
Firmly attach the top tether strap and
make sure that the belt is not twisted.
●
Do not attach the top tether strap to
anything other than the anchor
bracket.
●
After securing a child restraint system,
never adjust the seat.
●
Follow all installation instructions pro-
vided by the child restraint system
manufacturer.
NOTICE
■
Anchor brackets (for top tether
strap)
When not in use, make certain to close
the lid. If it remains open, the lid may be
damaged.
55
1-3. Lexus Enform
1
For safety and security
1-3.Lexus Enform
*
: If equipped
“SOS” button
LED light indicators
Microphone
Subscribers have the following Safety
Connect services available:
Automatic Collision Notification
*
Helps drivers receive necessary response
from emergency service providers.
(
*
: U.S. Patent No. 7,508,298 B2
Stolen Vehicle Location
Helps drivers in the event of vehicle theft.
(
)
Emergency Assistance Button
(“SOS”)
Connects drivers to response-center sup-
port. (
Enhanced Roadside Assistance
Provides drivers various on-road assis-
tance. (
)
After you have signed the Telematics
Subscription Service Agreement and
are enrolled, you can begin receiving
services.
A variety of subscription terms is avail-
able for purchase. Contact your Lexus
dealer, call the following or push the
“SOS” button in your vehicle for fur-
ther subscription details.
• The United States
1-800-25-LEXUS (1-800-255-3987)
• Canada
1-800-26-LEXUS (1-800-265-3987)
• Puerto Rico
Safety Connect
*
Safety Connect is a subscription-
based telematics service that uses
Global Positioning System (GPS)
data and embedded cellular tech-
nology to provide safety and secu-
rity features to subscribers. Safety
Connect is supported by Lexus’
designated response center, which
operates 24 hours per day, 7 days
per week.
Safety Connect service is available
by subscription on select, telemat-
ics hardware-equipped vehicles.
By using the Safety Connect ser-
vice, you are agreeing to be bound
by the Connected Services Terms
of Use, as in effect and amended
from time to time, a current copy of
which is available at Lexus.com. All
use of the Safety Connect service is
subject to such then-applicable
Terms and Conditions.
System components
A
B
Services
Subscription
C
56
1-3. Lexus Enform
1-877-539-8777
■
Safety Connect Services Information
●
Phone calls using the vehicle’s
Bluetooth
®
technology will not be possi-
ble during Safety Connect.
●
Safety Connect is available beginning
Fall 2009 on select Lexus models (in the
contiguous United States only). Contact
with the Safety Connect response center
is dependent upon the telematics device
being in operative condition, cellular con-
nection availability, and GPS satellite sig-
nal reception, which can limit the ability to
reach the response center or receive
emergency service support. Enrollment
and Telematics Subscription Service
Agreement required. A variety of sub-
scription terms is available; charges vary
by subscription term selected and loca-
tion.
●
Automatic Collision Notification, Emer-
gency Assistance and Stolen Vehicle
Location will function in the United
States, including Hawaii and Alaska,
Puerto Rico and in Canada, and
Enhanced Roadside Assistance will func-
tion in the United States, Puerto Rico and
in Canada.
●
Automatic Collision Notification, Emer-
gency Assistance, Stolen Vehicle and
Enhanced Road Assistance will not func-
tion in the United States Virgin Islands.
For vehicles first sold in the USVI, no
Safety Connect services will function in
and outside the United States Virgin
Islands.
●
Safety Connect services are not subject
to section 255 of the Telecommunica-
tions Act and the device is not TTY com-
patible.
■
Languages
The Safety Connect response center will
offer support in multiple languages. The
Safety Connect system will offer voice
prompts in English, Spanish, and French.
Please indicate your language of choice
when enrolling.
■
When contacting the response center
You may be unable to contact the response
center if the network is busy.
When the engine switch is turned to
IGNITION ON mode, the red indica-
tor light comes on for 2 seconds then
turns off. Afterward, the green indica-
tor light comes on, indicating that the
service is active.
The following indicator light patterns
indicate specific system usage condi-
tions:
Green indicator light on = Active
service
Green indicator light flashing =
Safety Connect call in process
Red indicator light (except at vehi-
cle start-up) = System malfunction
(contact your Lexus dealer)
No indicator light (off) = Safety
Connect service not active
■
Automatic Collision Notification
In case of either airbag deployment or
severe rear-end collision, the system is
designed to automatically call the
response center. The responding
agent receives the vehicle’s location
and attempts to speak with the vehicle
occupants to assess the level of emer-
gency. If the occupants are unable to
communicate, the agent automatically
treats the call as an emergency, con-
Safety Connect LED light Indi-
cators
Safety Connect services
57
1-3. Lexus Enform
1
For safety and security
tacts the nearest emergency services
provider to describe the situation, and
requests that assistance be sent to the
location.
■
Stolen Vehicle Location
If your vehicle is stolen, Safety Connect
can work with local authorities to assist
them in locating and recovering the
vehicle. After filing a police report, call
the Safety Connect response center at
1-800-25-LEXUS (1-800-255-
3987) in the United States, 1-877-
539-8777 in Puerto Rico or 1-800-
265-3987 in Canada, and follow the
prompts for Safety Connect to initiate
this service.
In addition to assisting law enforce-
ment with recovery of a stolen vehicle,
Safety-Connect-equipped vehicle
location data may, under certain cir-
cumstances, be shared with third par-
ties to locate your vehicle. Further
information is available at Lexus.com.
■
Emergency Assistance Button
(“SOS”)
In the event of an emergency on the
road, push the “SOS” button to reach
the Safety Connect response center.
The answering agent will determine
your vehicle’s location, assess the
emergency, and dispatch the neces-
sary assistance required.
If you accidentally press the “SOS” button,
tell the response-center agent that you are
not experiencing an emergency.
■
Enhanced Roadside Assistance
Enhanced Roadside Assistance adds
GPS data to the already included war-
ranty-based Lexus roadside service.
Subscribers can press the “SOS” but-
ton to reach a Safety Connect
response-center agent, who can help
with a wide range of needs, such as:
towing, flat tire, fuel delivery, etc. For a
description of the Roadside Assistance
services and their limitations, please
see the Safety Connect Terms and
Conditions, which are available at
Lexus.com.
Important! Read this information about
exposure to radio frequency signals
before using Safety Connect;
The Safety Connect system installed in
your vehicle is a low-power radio
transmitter and receiver. It receives
and also sends out radio frequency
(RF) signals.
In August 1996, the Federal Commu-
nications Commission (FCC) adopted
RF exposure guidelines with safety lev-
els for mobile wireless phones. Those
guidelines are consistent with the
safety standards previously set by the
following U.S. and international stan-
dards bodies.
ANSI (American National Stan-
dards Institute) C95.1 [1992]
NCRP (National Council on Radia-
tion Protection and Measurement)
Report 86 [1986]
ICNIRP (International Commission
on Non-Ionizing Radiation Protec-
Safety information for Safety
Connect
58
1-3. Lexus Enform
tion) [1996]
Those standards were based on com-
prehensive and periodic evaluations of
the relevant scientific literature. Over
120 scientists, engineers, and physi-
cians from universities, and govern-
ment health agencies and industries
reviewed the available body of
research to develop the ANSI Stan-
dard (C95.1).
The design of Safety Connect com-
plies with the FCC guidelines in addi-
tion to those standards.
■
Free/Open Source Software Informa-
tion
This product contains Free/Open Source
Software (FOSS). The license information
and/or the source code of such FOSS can
be found at the following URL.
https://opensource.lge.com/osSch/
list?types=ALL&search=TL21BNU
59
1-4. Theft deterrent system
1
For safety and security
1-4.Theft deterrent system
The indicator light flashes after the
engine switch has been turned off to
indicate that the system is operating.
The indicator light stops flashing after
the engine switch has been turned to
ACCESSORY or IGNITION ON
mode to indicate that the system has
been canceled.
■
System maintenance
The vehicle has a maintenance-free type
engine immobilizer system.
■
Conditions that may cause the system to
malfunction
●
If the grip portion of the key is in contact
with a metallic object
●
If the key is in close proximity to or touch-
ing a key registered to the security sys-
tem (key with a built-in transponder chip)
of another vehicle
Engine immobilizer system
The vehicle’s keys have built-in
transponder chips that prevent the
engine from starting if a key has not
been previously registered in the
vehicle’s on-board computer.
Never leave the keys inside the
vehicle when you leave the vehicle.
This system is designed to help pre-
vent vehicle theft but does not guar-
antee absolute security against all
vehicle thefts.
Operating the system
NOTICE
■
To ensure the system operates cor-
rectly
Do not modify or remove the system. If
modified or removed, the proper opera-
tion of the system cannot be guaranteed.
60
1-4. Theft deterrent system
■
Items to check before locking the
vehicle
To prevent unexpected triggering of
the alarm and vehicle theft, make sure
of the following:
Nobody is in the vehicle.
The windows and moon roof (if
equipped) or panoramic moon roof
(if equipped) are closed before the
alarm is set.
No valuables or other personal
items are left in the vehicle.
■
Setting
Close the doors, trunk and hood, and
lock all the doors using the entry func-
tion or wireless remote control. The
system will be set automatically after
30 seconds.
Except for Canada, the alarm can also
be set using the mechanical key.
The indicator light changes from being on
to flashing when the system is set.
■
Canceling or stopping
Do one of the following to deactivate
or stop the alarm:
Except for Canada: Unlock the
doors using the entry function, wire-
less remote control or mechanical
key.
For Canada: Unlock the doors using
the entry function or wireless
remote control.
Turn the engine switch to ACCES-
SORY or IGNITION ON mode, or
start the engine. (The alarm will be
deactivated or stopped after a few
seconds.)
■
System maintenance
The vehicle has a maintenance-free type
alarm system.
Alarm
The alarm uses light and sound to
give an alert when an intrusion is
detected.
The alarm is triggered in the follow-
ing situations when the alarm is set:
A locked door is unlocked or
opened in any way other than
using the entry function, wireless
remote control or mechanical
key
*
. (The doors will lock again
automatically.)
A locked trunk is unlocked or
opened in any way other than
using the entry function or wire-
less remote control.
The hood is opened.
*
: Except for Canada
Setting/canceling/stopping the
alarm system
61
1-4. Theft deterrent system
1
For safety and security
■
Triggering of the alarm
The alarm may be triggered in the following
situations:
(Stopping the alarm deactivates the alarm
system.)
●
For Canada: The doors are unlocked
using the mechanical key.
●
The trunk is unlocked using the mechani-
cal key.
●
A person inside the vehicle opens a door,
the trunk or hood, or unlocks the vehicle
using a door lock switch.
●
The battery is recharged or replaced
when the vehicle is locked. (
■
Alarm-operated door lock
In the following cases, depending on the sit-
uation, the door may automatically lock to
prevent improper entry into the vehicle:
●
When a person remaining in the vehicle
unlocks the door and the alarm is acti-
vated.
●
While the alarm is activated, a person
remaining in the vehicle unlocks the door.
●
When recharging or replacing the bat-
tery
NOTICE
■
To ensure the system operates cor-
rectly
Do not modify or remove the system. If
modified or removed, the proper opera-
tion of the system cannot be guaranteed.
63
2
2
Vehi
cle
status
inform
ati
on a
nd i
ndic
ators
Vehicle status information
and indicators
2-1. Instrument cluster
Warning lights and indicators.
Gauges and meters (except F
SPORT models) . . . . . .
Gauges and meters (F SPORT
models). . . . . . . . . . .
Multi-information display. . ..
Head-up display . . . . . . ...
Fuel consumption screen. . ..
64
2-1. Instrument cluster
2-1.Instrument cluster
Except F SPORT models
The image may differ from the actual condition.
F SPORT models
The image may differ from the actual condition.
Warning lights and indicators
The warning lights and indicators on the instrument cluster, center panel and
outside rear view mirrors inform the driver of the status of the vehicle’s vari-
ous systems.
Warning lights and indicators displayed on the instrument cluster
65
2-1. Instrument cluster
2
Vehi
cle
status
inform
ati
on a
nd i
ndic
ators
Warning lights inform the driver of
malfunctions in the indicated vehicle’s
systems.
Warning lights
(U.S.A.)
Brake system warning light
*1
(
(red)
(Canada)
Brake system warning light
*1
(
(yellow)
Brake system warning light
*1
(
High coolant temperature
warning light
*2
(
Charging system warning
light
*2
(
Low engine oil pressure warn-
ing light
*2
(
(U.S.A.)
Malfunction indicator lamp
*1
(
(Canada)
Malfunction indicator lamp
*1
(
SRS warning light
*1
(
(U.S.A.)
ABS warning light
*1
(
(Canada)
ABS warning light
*1
(
Inappropriate pedal operation
warning light
*2
(
(red)
Electric power steering system
warning light
*1
(
(yellow)
Electric power steering system
warning light
*1
(
Low fuel level warning light
(
Driver’s and front passenger’s
seat belt reminder light
(
Rear passengers’ seat belt
reminder lights
*2
(
Tire pressure warning light
*1
(
(orange)
LTA indicator
*2
(
(flashes)
Intuitive parking assist OFF indi-
cator
*1
(if equipped) (
(flashes)
RCTA OFF indicator
*1
(
(flashes or
illuminates)
RCD OFF indicator (if
equipped) (
(flashes)
PKSB OFF indicator
*1
(if
equipped) (
(flashes or
illuminates)
PCS warning light
*1
(
Slip indicator
*1
(
(flashes)
(U.S.A.)
Parking brake indicator
(
(flashes)
(Canada)
Parking brake indicator
(
66
2-1. Instrument cluster
*1
: These lights come on when the engine
switch is turned to IGNITION ON
mode to indicate that a system check is
being performed. They will turn off after
the engine is started, or after a few sec-
onds. There may be a malfunction in a
system if the lights do not come on, or
turn off. Have the vehicle inspected by
your Lexus dealer.
*2
: This light illuminates on the multi-infor-
mation display.
The indicators inform the driver of the
operating state of the vehicle’s various
systems.
(flashes)
Brake hold operated indica-
tor
*1
(
Master warning light
*1
(
WARNING
■
If a safety system warning light does
not come on
Should a safety system light such as the
ABS and SRS warning light not come on
when you start the engine, this could
mean that these systems are not avail-
able to help protect you in an accident,
which could result in death or serious
injury. Have the vehicle inspected by
your Lexus dealer immediately if this
occurs.
Indicators
Turn signal indicator (
(U.S.A.)
Headlight indicator (
(Canada)
Tail light indicator (
Headlight high beam indicator
(
Automatic High Beam indicator
(
PCS warning light
*1, 2
(
Cruise control indicator
*3
(
Dynamic radar cruise control
indicator
*3
(
Cruise control “SET” indica-
tor
*3
(
(white)
LTA indicator
*3
(
(green)
LTA indicator
*3
(
(orange)
(flashes)
LTA indicator
*3
(
BSM outside rear view mirror
indicators
*1, 4
(
BSM indicator (
Intuitive parking assist OFF indi-
cator
*1, 2
(if equipped)
(
RCTA OFF indicator
*1, 2
(
RCD OFF indicator
*2
(if
equipped) (
PKSB OFF indicator
*1, 2
(if
equipped) (
(flashes)
Slip indicator
*1
(
VSC OFF indicator
*1, 2
(
67
2-1. Instrument cluster
2
Vehi
cle
status
inform
ati
on a
nd i
ndic
ators
Drive mode indicators
Except F SPORT models
F SPORT models
*1
: These lights come on when the engine
switch is turned to IGNITION ON
mode to indicate that a system check is
being performed. They will turn off after
the engine is started, or after a few sec-
onds. There may be a malfunction in a
system if the lights do not come on, or
turn off. Have the vehicle inspected by
your Lexus dealer.
*2
: This light comes on when the system is
turned off.
*3
: This light illuminates on the multi-infor-
mation display.
*4
: This light illuminates on the outside rear
view mirrors.
*5
: Except F SPORT models: This light illu-
minates on the multi-information dis-
play.
*6
: When the outside temperature is
approximately 37°F (3°C) or lower,
this indicator will flash for approxi-
mately 10 seconds, then stay on.
*7
: This light illuminates on the center
panel.
Smart access system with push-
button start indicator
*3
(
(U.S.A.)
Parking brake indicator
(
(Canada)
Parking brake indicator
(
Brake hold standby indicator
*1
(
Brake hold operated indica-
tor
*1
(
Eco Driving Indicator Light
*1, 5
(
Low outside temperature indi-
cator
*3, 6
(
“PASSENGER AIR
BAG” indicator lights
*1, 7
(
Eco drive mode indicator
(
Sport mode indicator (
Custom mode indicator (if
equipped) (
Eco drive mode indicator
(
Sport mode indicator (if
equipped) (
Sport S mode indicator (if
equipped) (
Sport S+ mode indicator (if
equipped) (
68
2-1. Instrument cluster
■
Locations of gauges and meters
The units of measure may differ depending on the intended destination of the vehicle.
Multi-information display
Presents the driver with a variety of vehicle data (
Displays warning messages if a malfunction occurs (
Outside temperature
Displays the outside temperature within the range of -40°F (-40°C) to 122°F (50°C)
Low outside temperature indicator comes on when the ambient temperature is 37°F
(3°C) or lower
Tachometer
Displays the engine speed in revolutions per minute
When sport mode is selected for the driving mode, the periphery of the tachometer will
change color and the scale of the tachometer will be emphasized.
Speedometer
Clock
Time displayed is linked to the analog clock on the center panel. (
Engine coolant temperature gauge
Displays the engine coolant temperature
Fuel gauge
Displays the quantity of fuel remaining in the tank
Gauges and meters (except F SPORT models)
Meter display
A
B
C
D
E
F
G
69
2-1. Instrument cluster
2
Vehi
cle
status
inform
ati
on a
nd i
ndic
ators
In the following situations, the actual quantity of fuel remaining in the tank may not be dis-
played correctly. Refer to P.69 if the actual quantity of fuel remaining in the tank is not dis-
played correctly.
• A small amount of fuel is added.
• Fuel is added with the fuel gauge near or at “F”.
• The vehicle is stopped on an uneven surface, such as a slope.
• The vehicle is driven on a slope or around a curve.
Shift position and shift range (
Odometer and trip meter display (
■
Manually updating the fuel gauge and
possible driving range
The fuel gauge and the possible driving
range are linked. If the displays of the fuel
gauge and possible driving range do not
update after adding a small amount of fuel,
the displays can be updated by performing
the following procedure.
1
Stop the vehicle on a level surface.
2
Press the “ODO TRIP” switch to
change the odometer and trip meter
display to odometer.
3
Turn the engine switch off.
4
While pressing and holding the “ODO
TRIP” switch, turn the engine switch to
IGNITION ON mode.
5
Continue to hold the “ODO TRIP”
switch for approximately 5 seconds,
and then release it once the odometer
begins flashing.
Updating is complete once the odometer
flashes for approximately 5 seconds and
then the display returns to normal.
■
Outside temperature display
●
In the following situations, the correct
outside temperature may not be dis-
played, or the display may take longer
than normal to change:
• When stopped, or driving at low speeds
(less than 12 mph [20 km/h])
• When the outside temperature has
changed suddenly (at the entrance/exit
of a garage, tunnel, etc.)
●
When “--” or “E” is displayed, the system
may be malfunctioning. Take your vehicle
to your Lexus dealer.
■
Liquid crystal display
■
Customization
The gauges and meters can be customized
on
of the multi-information display.
(
H
I
WARNING
■
The information display at low tem-
peratures
Allow the interior of the vehicle to warm
up before using the liquid crystal infor-
mation display. At extremely low tem-
peratures, the information display
monitor may respond slowly, and display
changes may be delayed.
For example, there is a lag between the
driver’s shifting and the new gear num-
ber appearing on the display. This lag
could cause the driver to downshift
again, causing rapid and excessive
engine braking and possibly an accident
resulting in death or injury.
NOTICE
■
To prevent damage to the engine and
its components
●
Do not let the indicator needle of the
tachometer enter the red zone, which
indicates the maximum engine speed.
70
2-1. Instrument cluster
■
Display items
Odometer
Displays the total distance the vehicle has
been driven.
Trip meter A/trip meter B
Displays the distance the vehicle has been
driven since the meter was last reset. Trip
meters A and B can be used to record and
display different distances independently.
Distance until next engine oil
change
Displays the distance the vehicle can be
driven until an oil change is necessary.
■
Changing the display
Each time the “ODO TRIP” switch is
pressed, the displayed item will be
changed. When the trip meter is dis-
played, pressing and holding the switch
will reset the trip meter.
■
Pop-up display
Distance until the next engine oil
change will be displayed when a warn-
ing message indicating that oil mainte-
nance should be performed soon or is
required is displayed.
The brightness of the instrument panel
lights can be adjusted.
1
Darker
2
Brighter
■
Brightness of the meter lights (day mode
and night mode)
The brightness of the meter lights can be
adjusted individually.
In the following situations, the meters
changes between day mode and night
mode.
●
Day mode: When the tail lights are off or
when the tail lights are on but the sur-
rounding area is bright
●
Night mode: When the tail lights are on
and the surrounding area is dark
NOTICE
●
The engine may be overheating if the
engine coolant temperature gauge is
in the red zone (H). In this case, imme-
diately stop the vehicle in a safe place,
and check the engine after it has
cooled completely. (
Odometer and trip meter dis-
play
Changing the instrument panel
light brightness
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст