LEXUS GS F (2018 year). Instruction — part 5
72
Engine immobilizer system
The indicator light flashes after the
engine switch has been turned off to
indicate that the system is operating.
The indicator light stops flashing after
the engine switch has been turned to
ACCESSORY or IGNITION ON
mode to indicate that the system has
been canceled.
■
System maintenance
The vehicle has a maintenance-free type engine immobilizer system.
■
Conditions that may cause the system to malfunction
●
If the grip portion of the key is in contact with a metallic object
●
If the key is in close proximity to or touching a key to the security system (key with a
built-in transponder chip) of another vehicle
The vehicle’s keys have built-in transponder chips that prevent the engine
from starting if a key has not been previously registered in the vehicle’s on-
board computer.
Never leave the keys inside the vehicle when you leave the vehicle.
This system is designed to help prevent vehicle theft but does not guarantee
absolute security against all vehicle thefts.
73
1
For safety
and security
■
Certifications for the engine immobilizer system
For vehicles sold in the U.S. mainland, Hawaii, NATO Germany, Guam and Puerto Rico
For vehicles sold in Canada
WARNING
■
Certifications for the engine immobilizer system
Changes or modifications not expressly approved by the party responsible for compli-
ance could void the user’s authority to operate the equipment.
NOTICE
■
To ensure the system operates correctly
Do not modify or remove the system. If modified or removed, the proper operation of
the system cannot be guaranteed.
74
Alarm
The alarm uses light and sound to give an alert when an intrusion is detected.
The alarm is triggered in the following situations when the alarm is set:
●
A locked door is unlocked or opened in any way other than using the entry
function, wireless remote control or mechanical key. (The doors will lock again
automatically.)
●
A locked trunk is unlocked or opened in any way other than using the entry
function or wireless remote control.
●
The hood is opened.
Close the doors, trunk and hood, and
lock all the doors. The system will be set
automatically after 30 seconds.
The indicator light changes from being
on to flashing when the system is set.
Do one of the following to deactivate or stop the alarms:
●
Unlock the doors.
●
Turn the engine switch to ACCESSORY or IGNITION ON mode, or start
the engine. (The alarm will be deactivated or stopped after a few seconds.)
The alarm
Setting the alarm system
Deactivating or stopping the alarm
75
1
For safety
and security
■
System maintenance
The vehicle has a maintenance-free type alarm system.
■
Items to check before locking the vehicle
To prevent unexpected triggering of the alarm and vehicle theft, make sure of the follow-
ing:
●
Nobody is in the vehicle.
●
The windows and moon roof are closed before the alarm is set.
●
No valuables or other personal items are left in the vehicle.
■
Triggering of the alarm
The alarm may be triggered in the following situations:
(Stopping the alarm deactivates the alarm system.)
■
Alarm-operated door lock
In the following cases, the door may automatically lock:
●
When a person remaining in the vehicle unlocks the door and the alarm is activated.
●
While the alarm is activated, a person remaining in the vehicle unlocks the door.
●
When recharging or replacing the battery.
●
The trunk is opened using the mechanical key.
●
A person inside the vehicle opens a door, the
trunk or hood, or unlocks the vehicle using an
inside lock button.
●
The battery is recharged or replaced when the
vehicle is locked. (
76
NOTICE
■
To ensure the system operates correctly
Do not modify or remove the system. If modified or removed, the proper operation of
the system cannot be guaranteed.
77
Instrument cluster
2
2.
Instrument cluster
Warning lights
and indicators. . . . . . . ..78
Gauges and meters
(GS350/GS300). . . . . 86
Gauges and meters (GS F). ..92
Multi-information display
(GS350/GS300). . . . ..100
Multi-information display
(GS F) . . . . . . . . . . ...108
Head-up display. . . . . . .. 120
Fuel consumption
information . . . . . . . . ..127
78
Warning lights and indicators
GS350/GS300 (except F SPORT models)
GS350/GS300 (F SPORT models)
The warning lights and indicators on the instrument cluster, center panel and
outside rear view mirrors inform the driver of the status of the vehicle’s vari-
ous systems.
For the purpose of explanation, the following illustrations display all warning
lights and indicators illuminated.
79
2
Instrument cl
uste
r
GS F
The units used on the meters and some indicators may differ depending on the target
region.
80
Warning lights inform the driver of malfunctions in the indicated vehicle systems.
Warning lights
*
1
(U.S.A.)
Brake system warning light
(
*
1, 3
(If equipped)
PCS (Pre-Collision
System) warning light
(
*
1
(Canada)
Brake system warning light
(
*
1
Slip indicator (
*
1, 2
Charging system warning
light (
*
1, 4, 5
(If equipped)
“AFS OFF” indicator
(
*
1
(U.S.A.)
Malfunction indicator lamp
(
*
1, 4
Brake hold operated
indicator (
*
1
(Canada)
Malfunction indicator lamp
(
*
4
(U.S.A.)
Parking brake indicator
(
→P. 436)
*
1
SRS warning light
(
*
4
(Canada)
Parking brake indicator
(
→P. 436)
*
1
(U.S.A.)
ABS warning light
(
*
1
Brake system warning light
(
→P. 436)
*
1
(Canada)
ABS warning light
(
*
6
Open door warning light
(
→P. 436)
*
1
Electric power steering
system warning light
(
Low fuel level warning light
(
→P. 436)
81
2
Instrument cl
uste
r
*
1
: These lights turn on when the engine switch is turned to IGNITION ON mode to
indicate that a system check is being performed. They will turn off after the engine is
started, or after a few seconds. There may be a malfunction in a system if a light does
not come on, or turn off. Have the vehicle inspected by your Lexus dealer.
*
2
: On some models
*
3
: The light flashes or illuminates to indicate a malfunction.
*
4
: The light flashes to indicate a malfunction.
*
5
: GS350/GS300
*
6
: GS F
The indicators inform the driver of the operating state of the vehicle’s various sys-
tems.
Seat belt reminder light
(
*
1
Tire pressure warning light
(
→P. 436)
*
1
Master warning light
(
(If equipped)
LKA warning light
(
Indicators
Turn signal indicator
(
Cruise control indicator
(
(U.S.A.)
Headlight indicator
(
(If equipped)
Dynamic radar cruise
control indicator
(
(Canada)
Tail light indicator
(
Cruise control
“SET” indicator
(
Headlight high beam
indicator (
(If equipped)
LKA indicator (
(If equipped)
Automatic High Beam
indicator (
*
1
(If equipped)
Intuitive parking assist
indicator
82
●
Drive mode indicators
GS350/GS300 (except F SPORT models)
*
2, 3
(If equipped)
“AFS OFF” indicator
(
*
2
Brake hold standby
indicator (
→P. 213)
*
2, 4
Slip indicator (
*
2
Brake hold operated
indicator (
→P. 213)
*
2
VSC OFF indicator
(
*
2, 9
“AIR BAG ON/OFF”
indicator (
*
2, 5
TRAC OFF indicator
(
*
2
Eco Driving Indicator Light
(
*
2, 6
(If equipped)
PCS (Pre-Collision
System) warning light
(
(U.S.A.)
Parking brake indicator
(
*
7, 8
(If equipped)
BSM (Blind Spot Monitor)
outside rear view mirror
indicators (
(Canada)
Parking brake indicator
(
(If equipped)
BSM (Blind Spot Monitor)
indicator (
*
10
Low outside temperature
indicator (
Eco drive mode indicator
(
(If equipped)
“SPORT” indicator
(
(If equipped)
“SPORT S” indicator
(
(If equipped)
“SPORT S+” indicator
(
(If equipped)
“Customize” indicator
(
Snow mode indicator
(
83
2
Instrument cl
uste
r
GS350/GS300 (F SPORT models)
GS F
●
TVD (Torque Vectoring Differential) control mode indicators (GS F)
Eco drive mode indicator
(
“SPORT S” indicator
(
“SPORT S+” indicator
(
“CUSTOMIZE” indicator
(
Snow mode indicator
(
“NORMAL” indicator
(
Eco drive mode indicator
(
“SPORT S” indicator
(
“SPORT S+” indicator
(
“CUSTOMIZE” indicator
(
Snow mode indicator
(
“EXPERT” indicator
(
“STANDARD” indicator
(
“SLALOM” indicator
(
“TRACK” indicator
(
84
*
1
: Refer to the “NAVIGATION AND MULTIMEDIA SYSTEM OWNER’S MANUAL”.
*
2
: These lights turn on when the engine switch is turned to IGNITION ON mode to
indicate that a system check is being performed. They will turn off after the engine is
started, or after a few seconds. There may be a malfunction in a system if a light does
not come on, or turn off. Have the vehicle inspected by your Lexus dealer.
*
3
: GS350/GS300
*
4
: The light flashes to indicate that the system is operating.
*
5
: GS F
*
6
: The light turns on when the system is turned off.
*
7
: In order to confirm operation, the BSM outside rear view mirror indicators illuminate
in the following situations:
• When the engine switch is in IGNITION ON mode, the BSM function is enabled
on
of the multi-information display
• When the BSM function is enabled on
of the multi-information display, the
engine switch is turned to IGNITION ON mode.
If the system is functioning correctly, the BSM outside rear view mirror indicators will
turn off after a few seconds.
If the BSM outside rear view mirror indicators do not illuminate or do not turn off,
there may be a malfunction in the system.
If this occurs, have the vehicle inspected by your Lexus dealer.
*
8
: This light illuminates on the outside rear view mirrors.
*
9
: This light illuminates on the center panel.
*
10
: When the outside temperature is approximately 37
°F (3°C) or lower, the indicator
will flash for approximately 10 seconds, then stay on.
85
2
Instrument cl
uste
r
■
Eco Driving Indicator
GS350/GS300
Eco Driving Indicator will not operate under the following conditions:
●
The shift lever is in any position other than D.
●
A paddle shift switch is operated.
●
Neither normal mode nor Eco drive mode is selected. (
●
The vehicle speed is approximately 80 mph (130 km/h) or higher.
GS F
Eco Driving Indicator will not operate under the following conditions:
●
The shift lever is in any position other than D.
●
A paddle shift switch is operated.
●
Neither normal mode nor Eco drive mode is selected. (
●
The vehicle speed is approximately 80 mph (130 km/h) or higher.
Eco Driving Indicator Light
During Eco-friendly acceleration (Eco driv-
ing), the Eco Driving Indicator Light will turn
on. When the acceleration exceeds the Zone
of Eco driving, or when the vehicle is stopped,
the light turns off.
Eco Driving Indicator Zone Display
Suggests the Zone of Eco driving with current
Eco driving ratio based on acceleration.
Eco driving ratio based on acceleration
If the acceleration exceeds the Zone of Eco
driving, the right side of the Eco Driving Indi-
cator Zone Display will illuminate.
Zone of Eco driving
During Eco-friendly acceleration (Eco driving),
the Eco Driving Indicator Light will turn on.
When the acceleration exceeds the Zone of
Eco driving, or when the vehicle is stopped, the
light turns off.
WARNING
■
If a safety system warning light does not come on
Should a safety system light such as the ABS and SRS warning light not come on when
you start the engine, this could mean that these systems are not available to help pro-
tect you in an accident, which could result in death or serious injury. Have the vehicle
inspected by your Lexus dealer immediately if this occurs.
1
2
3
4
86
Gauges and meters (GS350/GS300)
Except F SPORT models
F SPORT models
The units used on the speedometer may differ depending on the target region.
87
2
Instrument cl
uste
r
Engine coolant temperature gauge
Displays the engine coolant temperature
Tachometer
Displays the engine speed in revolutions per minute
Outside temperature
Displays the outside temperature within the range of -40
°F (-40°C) to 122°F
(50
°C). Low outside temperature indicator comes on when the ambient temperature
is 37
°F (3°C) or lower.
Clock
Time displayed is linked to the analog clock on the instrument panel. (
Speedometer
Displays the vehicle speed
Fuel gauge
Displays the quantity of fuel remaining in the tank
Multi-information display
Presents the driver with a variety of driving-related data (
Displays warning messages in case of a malfunction (
Odometer, trip meter and maintenance required information display
Odometer:
Displays the total distance the vehicle has been driven
Trip meter:
Displays the distance the vehicle has been driven since the meter was last reset. Trip
meters “A” and “B” can be used to record and display different distances inde-
pendently.
Maintenance required information:
• Displays the maintenance required information when the engine switch is in IGNI-
TION ON mode.
• It can be reset from
of the multi-information display. (
Shift position and shift range
Displays the selected shift position or selected shift range (
1
2
3
4
5
6
7
8
9
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст