LEXUS GS F (2018 year). Instruction — part 8
120
Head-up display
∗
The head-up display can be used to project vehicle speed and other information
onto the windshield.
Head-up display
Display brightness will change automat-
ically according to the brightness of the
surrounding area.
“HUD” button
Display brightness adjustment
switch
Display brightness can be adjusted to
the desired level.
Display position adjustment switch
“DISP” button
∗
: If equipped
Summary of functions
1
2
3
4
5
121
2
Instrument cl
uste
r
●
Vehicle speed
●
Tachometer
●
Shift position and shift range
Displays the selected shift position or selected shift range
(
●
Eco Driving Indicator (GS350/GS300)
(
●
Head-up rev indicator (GS F)
(
●
Audio display
*
Displays audio information for approximately 3 seconds when the audio system is
operated
●
Route guidance display (vehicles with navigation system)
(
When approaching an intersection while the navigation system is giving route guid-
ance, an arrow will automatically be displayed to indicate the direction of travel.
●
Lexus Enform (if equipped)
Displays “LEXUS Enform” for approximately 3 seconds when LEXUS App Suite is
operated
●
Lane departure warning display (LKA [Lane-Keeping Assist]) (if equipped)
(
●
Approach warning display (dynamic radar cruise control with full-speed
range) (if equipped)
(
●
Pre-collision warning message (PCS [Pre-Collision System])
(if equipped)
(
●
Speed limit display (vehicles with navigation system)
(
*
: The default setting is off
■
“HUD” button
Pressing the switch turns the head-
up display on/off and changes the
vehicle speed display units as fol-
lows:
U.S.A.
OFF
→ ON (MPH) →
ON (km/h)
→ OFF
Canada
OFF
→ ON (km/h) → ON (MPH) → OFF
Head-up display contents
Switching the head-up display
122
■
“DISP” button
Pressing the button changes the display items (except vehicle speed).
When any of the following displays are operating, the display items do not
change (except vehicle speed): Audio display/Route guidance display (vehi-
cles with navigation system)/Lexus Enform (if equipped)/Lane departure
warning display (if equipped)/Approach warning display (if equipped)/Pre-
collision warning message (if equipped)/Speed limit display (vehicles with
navigation system).
*
: Displayed when the drive gauges displays the SPORT mode screen and the shift lever
in M
GS350/GS300
GS F
Off
Eco Driving Indicator
Tachometer
Off
Tachometer
Head-up rev indicator
*
1
2
3
1
2
3
123
2
Instrument cl
uste
r
■
Adjusting the display position
Higher
Lower
■
Setting the brightness
The brightness of the display is automatically adjusted in accordance with the
brightness of the surrounding environment. However, the brightness can also
be manually adjusted in 9 stages.
Brighter
Darker
Making the display easier to see
1
2
1
2
124
Eco Driving Indicator Zone Display
Suggests the Zone of Eco driving with
current Eco driving ratio based on
acceleration.
Eco driving ratio based on accelera-
tion
If the acceleration exceeds the Zone of
Eco driving, the right side of the Eco
Driving Indicator Zone Display will illu-
minate.
Zone of Eco driving
Eco Driving Indicator will not operate under the following conditions:
●
The shift lever is in any position other than D.
●
A paddle shift switch is operated.
●
Neither normal mode nor Eco drive mode is selected. (
●
The vehicle speed is approximately 80 mph (130 km/h) or higher.
While the drive gauges displays the
SPORT mode screen with the shift
lever in M, the display changes to one
of 3 levels in response to the engine
speed, notifying you of when to shift up.
This may also be displayed when shifting
down as well, depending on the engine
speed.
When the vehicle approaches an inter-
section, the direction the vehicle should
go is guided by the arrow.
When the vehicle approaches an inter-
section, the route guidance will start
and the distance* to the intersection
will also be displayed.
*
: The distance decreases in increments of
164 ft. (50 m) and the distance indica-
tion will disappear when the vehicle
passes through the intersection.
Eco Driving Indicator (GS350/GS300)
1
2
Head-up rev indicator (GS F)
3
Route guidance display (vehicles with navigation system)
125
2
Instrument cl
uste
r
Displays the speed limit for the current
road.
Display of the following screens can be switched on or off.
●
Audio display
●
Route guidance display (vehicles with navigation system)
■
Changing the settings
Continue holding the “DISP” but-
ton until the screen changes, and
repeat the process until the set-
ting you want to change is dis-
played.
Customization can be performed
when the head-up display is on and
the vehicle is traveling at less than
5 mph (8 km/h).
Press the “DISP” button to switch between on and off.
On and off will be switched between each time the button is pressed.
If the button is left alone without being operated for a short time, setting will be fin-
ished automatically.
Speed limit display (vehicles with navigation system)
Display customization
1
2
126
■
Head-up display
●
The head-up display may seem dark and hard to see when viewed through sunglasses,
especially polarized sunglasses.
Adjust the brightness of the head-up display or remove your sunglasses.
●
When the head-up display is turned off, it will remain off even if the engine switch is
turned to IGNITION ON mode after the engine switch has been turned off.
●
The startup image will be displayed on the head-up display after the engine switch has
been turned to IGNITION ON mode while the head-up display switch is set to on.
■
Head-up rev indicator
●
The head-up display is linked to the rev indicator in the meter.
●
Whether or not to display the rev indicator in the head-up display, as well as display tim-
ing, can be changed through the settings for the rev indicator in the meter. (
■
When the battery is disconnected
The customize settings of the head-up display will be reset.
■
Head-up display automatic position adjustment
If the display position is recorded into memory, the head-up display will be automatically
adjusted to the desired position. (
WARNING
■
Before using the head-up display
Check that the position and brightness of the head-up display image does not interfere
with safe driving. Incorrect adjustment of the image’s position or brightness may
obstruct the driver’s view and lead to an accident, resulting in death or serious injury.
NOTICE
■
To prevent damage to components
●
Do not touch the inside of the head-up display projector or thrust sharp edges or the
like into the projector.
Doing so could cause mechanical malfunctions.
●
Do not place any drinks near the head-up dis-
play projector. If the projector gets wet, elec-
trical malfunctions may result.
●
Do not place anything on or put stickers onto
the head-up display projector.
Doing so could interrupt head-up display
indications.
127
2
Instrument cl
uste
r
Fuel consumption information
Remote Touch screen
“MENU” button
Remote Touch knob
“ENTER” buttons
Fuel consumption information can be displayed on the Remote Touch screen.
Vehicles with 12.3-inch display: The fuel consumption information can be dis-
played and operated on the side display.
1
2
3
4
128
Press the “MENU” button on the Remote Touch, then select
on the “Menu”
screen, and then select “Fuel Consumption”.
■
Trip information
If the “Past Record” screen is displayed, select “Trip Information”.
Resetting the consumption data
Fuel consumption in the past 15
minutes
Current fuel consumption
Average vehicle speed since the
engine was started.
Elapsed time since the engine
was started.
Cruising range (
Average fuel consumption for the past 15 minutes is divided by color into past
averages and averages attained since the engine switch was last turned to IGNI-
TION ON mode. Use the displayed average fuel consumption as a reference.
The image is an example only, and may vary slightly from actual conditions.
Fuel consumption
1
2
3
4
5
6
129
2
Instrument cl
uste
r
■
Past record
If the “Trip Information” screen is displayed, select “Past Record”.
Resetting the past record data
Best recorded fuel economy
Average fuel consumption
Previous fuel consumption record
Updating the average fuel con-
sumption data
The average fuel consumption his-
tory is divided by color into past
averages and the average fuel con-
sumption since the last reset. Use the
displayed average fuel consumption
as a reference.
The image is an example only, and may vary slightly from actual conditions.
■
Updating the past record data
Update the average fuel consumption by selecting “Update” to measure the current fuel
consumption again.
■
Resetting the data
The fuel consumption data can be deleted by selecting “Clear”.
■
Cruising range
Displays the estimated maximum distance that can be driven with the quantity of fuel
remaining.
This distance is computed based on your average fuel consumption.
As a result, the actual distance that can be driven may differ from that displayed.
1
2
3
4
5
130
Vehicle information can be displayed on the side display (
or
to select the desired screen.
Fuel consumption
Displays the average fuel consumption
for the past 10 minutes in 1 minute inter-
vals, as well as the cruising range.
Past record
Displays the average fuel consumption
and highest fuel consumption.
Trip information
Displays the cruising range, average
fuel consumption and the amount of
time elapsed since the engine was
started.
The image is an example only, and may vary slightly from actual conditions.
Using the side display (vehicles with 12.3-inch display)
132
131
3
Operation of
each component
3-1. Key information
Keys. . . . . . . . . . . . .. 132
3-2. Opening, closing and locking
the doors and trunk
Doors . . . . . . . . . . . . 137
Trunk . . . . . . . . . . . . 143
Smart access system
with push-button start . . . 150
3-3. Adjusting the seats
Front seats. . . . . . . . . ..158
Driving position memory. . . 160
Head restraints . . . . . . . 165
3-4. Adjusting the steering wheel
and mirrors
Steering wheel . . . . . . . . 168
Inside rear view mirror . . . . 169
Outside rear view mirrors. . . 171
3-5. Opening, closing the windows
and moon roof
Power windows . . . . . . . 175
Moon roof. . . . . . . . . .. 178
132
Keys
The following keys are provided with the vehicle.
Electronic keys
• Operating the smart access system
with push-button start (
• Operating the wireless remote con-
trol function
Mechanical keys
Key number plate
Card key (electronic key) (if
equipped)
Operating the smart access system with
push-button start (
Locks all the doors (
Unlocks all the doors
Opens the windows and moon roof
(
*
Opens the trunk (
Sounds the alarm (
*
: This setting must be customized at your
Lexus dealer.
The keys
1
2
3
4
Wireless remote control
1
2
3
4
5
133
3
Op
era
tio
n of
ea
ch
co
m
po
ne
nt
To take out the mechanical key, push
the release button and take the key out.
The mechanical key can only be
inserted in one direction, as the key only
has grooves on one side. If the key can-
not be inserted in a lock cylinder, turn it
over and re-attempt to insert it.
After using the mechanical key, store it
in the electronic key. Carry the mechan-
ical key together with the electronic key.
If the electronic key battery is depleted
or the entry function does not operate
properly, you will need the mechanical
key. (
■
Card key (if equipped)
●
The card key is not waterproof.
●
The mechanical key that is stored inside the card key should be used only if a problem
arises, such as when the card key does not operate properly.
●
If it is difficult to take out the mechanical key, push down the lock release button using a
pen tip etc. If it is still difficult to pull it out, use a coin etc.
Using the mechanical key
●
To store the mechanical key in the card key,
insert it while pressing the lock release button.
●
If the battery cover is not installed and the bat-
tery falls out or if the battery was removed
because the key got wet, reinstall the battery
with the positive terminal facing the Lexus
emblem.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст