Lexus SC300 / Lexus SC400. Manual — part 762
19. INSTALL
CONNECTOR
BRACKET
Torque: 4.9 N
⋅
m (50 kgf
⋅
cm, 43 in.
⋅
lbf)
20. INSTALL
PROTECTOR
21. INSTALL TURN SIGNAL BRACKET
Install the turn signal bracket so that its upper surface is par-
allel with upper surface of the capsule of the breakaway
bracket.
22. INSTALL UPPER BRACKET
(a) Install the upper bracket with 2 new tapered–head bolts.
(b) Tighten the 2 tapered–head bolts until the bolt heads break
off.
23. INSTALL LOWER DUST COVER
(a) Using a press, install the dust seal.
–
STEERING
STEERING COLUMN
SR–25
(b) Install the lower dust cover and clip.
24. INSTALL SLIDING YOKE
Align matchmarks and install the sliding yoke to the main
shaft.
Torque: 35 N
⋅
m (360 kgf
⋅
cm, 26 ft
⋅
lbf)
25. INSTALL IGNITION KEY CYLINDER ILLUMINATION
26. CHECK
TILT
OPERATION
(a) Check
that there is not axial play at the end of the main shaft.
(b) With the main shaft in the neutral position, push the tilt lever
and check that the main shaft rises to the uppermost position.
(c) Lower the main shaft, and check that it locks in the uppermost
position.
27. CHECK TELESCOPIC OPERATION
(a) Check that there is no axial play when the lever is turned fully
counterclockwise.
(b) Check that the main shaft moves smoothly when the lever is
turned clockwise.
SR–26
–
STEERING
STEERING COLUMN
POWER TILT AND POWER TELESCOPIC
STEERING COLUMN
COMPONENTS
SR0EJ–03
–
STEERING
STEERING COLUMN
SR–27
SECTIONAL VIEW
SR0EK–02
SR–28
–
STEERING
STEERING COLUMN
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст