Lexus SC300 / Lexus SC400. Manual — part 942
OK
NG
Type I
NG
Type II
NG
OK
OK
NG
INSPECTION PROCEDURE
1
Check output condition of diag. code 51.
C
P
(2) Connect terminals TE2 and E1 of TDCL.
(2) Turn ignition switch on.
(2) Crank the engine.
(2) Connect terminal TE1 and E1 of TDCL.
Check if diagnostic code “51” is output when then shift
level is in the P and D shift positions.
Result:
Go to step 2.
Go to step 3.
Proceed to next circuit inspection shown on ma-
trix chart (See page
).
2
Check for open in harness and connector between engine & ECT ECU and neutral start switch
(See page
Check and replace engine & ECT ECU.
Repair or replace harness or connector.
3
Check neutral start switch (See page
Replace neutral start switch.
Check and replace engine & ECT ECU.
–
ENGINE TROUBLESHOOTING
Circuit Inspection
TR–123
VALVE CLEARANCE ADJUSTING TOOL SET
Page 1 of 1
The Valve Lifter Press has undergone two modifications that will improve service procedures
on UZ and VZ series engines.
1. Due to space limitations on these engines, the thickness of the valve lifter press jaws
and its connecting rivet have been reduced. This reduction will allow proper
compression of the cam follower and spring without the tool slipping out of position.
2. The front jaw angle on the valve lifter press has also been modified. This change will
allow easier installation of the tool between the camshaft and the follower, and also
provide improved leverage for the compression of the cam follower and spring.
The updated tool set, Part Number 09248–55020, supersedes your previous 09248–55010
tool set. This new tool set will service all current Lexus engines.
SST’S/SSI’S
001
OCTOBER 11, 1991
ALL MODELS
A/C COMPRESSOR OIL APPLICATIONS
Page 1 of 1
Care must be taken to use only refrigerant oil which is compatible to the vehicle’s system.
Following are A/C oil application charts for both R–12 and HFC–134a systems:
R–12 SYSTEMS
MODEL
OIL TYPE
PART NUMBER
QUANTITY
All Models
ND–Oil 6
P/N (88899–28040)
60 cc
(or Equivalent)
P/N (07117–68040)
500 cc
HFC–134A SYSTEMS
MODEL
OIL TYPE
PART NUMBER
QUANTITY
All Models
ND–Oil 8
P/N (08885–09109)
40 cc
P/N (08885–09107)
250 cc
HEATING & AIR CONDITIONING
AC93–004
OCTOBER 22, 1993
ALL MODELS
DATE:
JULY 19, 1996
Title
1992 - 1995 SC 300/400 A/C CONTROL ASSEMBLY SERVICE PARTS
Page 1 of 6
To allow repairs to the A/C Control Assembly, service parts are now available. The following
information on parts and troubleshooting will aid you in addressing complaints with the LCD
display, night illumination or switch indicators.
PREVIOUSLY AVAILABLE PARTS:
CURRENTLY AVAILABLE PARTS:
*
Face Plate is not available as a separate part.
REF
:
HEATING & AIR
CONDITIONING
NO:
AC004-96
MODEL:
SC 300/400
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст