Lexus SC300 / Lexus SC400. Manual — part 210
DISASSEMBLY OF COMBINATION
SWITCH ASSEMBLY
(Components)
–
BODY ELECTRICAL SYSTEM
Lighting System
BE–41
1.
REMOVE WIRE HARNESS SPOOL COVER
Pry loose three locking lugs.
2.
REMOVE CONNECTOR FROM SPOOL BODY
(a) Pry loose two locking lugs and separate the connector
from spool body.
(b) Remove the separator from spool body.
3.
REMOVE WIRE HARNESS HOLDER
(a) Pry loose three locking lugs.
(b) Pull out the wire harness.
(c) Remove two screws and the wire harness holder.
4.
REMOVE SPIRAL CABLE SUBASSEMBLY
(a) Disconnect the connector (White).
(b) Remove the four screws and spiral cable subassembly.
BE–42
–
BODY ELECTRICAL SYSTEM
Lighting System
5.
REMOVE WIRE HARNESS CLAMP
Remove three screws and wire harness clamp.
6. SEPARATE
CONNECTOR
(a) Pry loose two locking lugs.
(b) Separate two connectors from connector assembly.
7.
REMOVE TERMINALS FROM CONNECTOR
(32p connector)
(a) Pull out two inner terminal covers.
CAUTION: Do not remove terminal for AIRBAG connec-
tor (Yellow).
(b) From the open end, insert a miniature screwdriver
between the locking lug and terminal.
(c) Pry down the locking lug with the screwdriver and pull
the terminal out from the rear.
8.
REMOVE LIGHT CONTROL SWITCH
(a) Remove the two screws, and separate the bracket from
switch body.
–
BODY ELECTRICAL SYSTEM
Lighting System
BE–43
(c) Remove two screws and the ball set plate from the
switch body.
(b) Remove
the ball and slide out the switch from the switch
body with the spring.
(d) Remove the boot.
9. REMOVE HEADLIGHT DIMMER SWITCH AND TURN
SIGNAL SWITCH
Remove three screws and the switch from the switch body.
10. REMOVE WIPER AND WASHER SWITCH
(a) Remove two screws and separate the bracket from the
switch body.
(b) Remove two screws and the switch from the switch
body.
(c) Remove the boot.
BE–44
–
BODY ELECTRICAL SYSTEM
Lighting System
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст