Lexus SC300 / Lexus SC400. Manual — part 296
MEMO
RE-24
mm
in.
30
40
60
1.18
1.57
2.36
FRONT BODY PILLAR (CUT): w/o Moon Roof
REMOVAL (With the cowl top side panel removed.)
Cut and Join
Location
40 mm
60 mm
30 mm
30 mm
Cut and Join Location
(Cut Location for Supply Parts)
[Cut and Join Location]
1.
Cut and join the parts at the locations shown
above.
HINT: Shift each cut and join location of the outer
pillar, front body pillar upper reinforcement, inner
pillar and the roof drip channel.
BODY PANEL REPLACEMENT
RE-25
INSTALLATION
Butt Weld
(Inner Pillar)
Inner Pillar
Front Body Pillar
Upper Reinforcement
Outer Pillar
Front Body Pillar
Lower Reinforcement
1.
Before temporarily installing the new outer
pillar, weld the front body pillar lower rein-
forcement with standard points.
2.
After installing the inner pillar and the front
body pillar upper reinforcement, install the
outer pillar.
3.
Temporarily install the new parts and mea-
sure each part in accordance with the body
dimension diagram.
4.
Before welding the new parts, check the fit
of the front door, front fender and the wind-
shield glass.
BODY PANEL REPLACEMENT
RE-26
INSTALLATION
Cut and Join
Location
Butt Weld
Roof Drip Channel
Butt Weld
1.
After installing the new parts, apply foamed
material.
HINT: For the foamed material application areas,
refer to page
.
BODY PANEL REPLACEMENT
RE-27
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст