Lexus SC300 / Lexus SC400. Manual — part 38
8. REMOVE
COMPRESSOR
(a) Remove under cover.
(b) Remove harness from the clamp.
(c) Remove the earth wire harness set bolt.
(d) Remove the nut, three bolts, bracket and the
compressor.
DISASSEMBLY OF MAGNETIC CLUTCH
AC–112
–
AIR CONDITIONING SYSTEM
Compressor
1.
REMOVE PRESSURE PLATE
(a) Using a SST and socket wrench, remove the shaft bolt.
SST 07112–76060
(b) Install a SST on the pressure plate.
SST 07112–66040
(c) Using a SST and socket wrench, remove the pressure
plate.
SST 07112–76060
(d) Remove the shims from the pressure plate.
2. REMOVE
ROTOR
(a) Using a SST, remove the snap ring.
SST 07114–84020
–
AIR CONDITIONING SYSTEM
Compressor
AC–113
(b) Using a plastic hammer, tap the rotor off the shaft.
NOTICE: Be careful not to damage the pulley when tap-
ping on the rotor.
3. REMOVE
STATOR
(a) Disconnect the stator lead wire from the compressor
housing.
(b) Using a SST, remove the snap ring.
SST 07114–84020
(c) Remove the stator.
AC–114
–
AIR CONDITIONING SYSTEM
Compressor
ASSEMBLY OF MAGNETIC CLUTCH
1. INSTALL
STATOR
(a) Install the stator on the compressor.
(b) Using a SST, install the snap ring.
SST 07114–84020
NOTICE: The snap ring should be installed so that its
beveled side faces up.
(c) Connect the stator lead wires to the compressor
housing.
2. INSTALL
ROTOR
(a) Install the rotor on the compressor shaft.
(b) Using a SST, install the snap ring.
SST 07114–84020
NOTICE: The snap ring should be installed so that its
beveled side faces up.
3.
INSTALL PRESSURE PLATE
(a) Put the shims to the pressure plate.
–
AIR CONDITIONING SYSTEM
Compressor
AC–115
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст