Lexus SC300 / Lexus SC400. Manual — part 44

WATER TEMPERATURE SENSOR

REMOVAL OF WATER TEMPERATURE
SENSOR

1.

REMOVE A/C UNIT
See page

AC–107

2. REMOVE

SENSOR

After taking off the clamp, take out the sensor.

INSPECTION OF WATER TEMPERATURE
SENSOR

See page

AC–51

INSTALLATION OF WATER
TEMPERATURE SENSOR

1.

INSTALL SENSOR TO A/C UNIT
Install the sensor with the clamp.

2.

INSTALL A/C UNIT
See page

AC–108

PRESSURE SWITCH

INSPECTION OF PRESSURE SWITCH

See page

AC–57

REMOVAL OF PRESSURE SWITCH

1.

RECOVER REFRIGERANT IN REFRIGERANT SYSTEM
See page

AC–16

2.

REMOVE PRESSURE SWITCH

(a) Disconnect the connector.
(b) Remove the pressure switch from the liquid tube.

HINT: Lock the switch mount on the tube with an open end
wrench, being careful not to deform the tube, and remove the
switch.

AC–136

–

AIR CONDITIONING SYSTEM

Water Temperature Sensor, Pressure Switch

INSTALLATION OF PRESSURE SWITCH

1.

INSTALL PRESSURE SWITCH

(a) Install the pressure switch to the liquid tube.

Specified torque: 10 N

⋅

m (100 kgf

⋅

cm, 7 ft

⋅

lbf)

HINT: Lock the switch mount on the tube with an open end
wrench, being careful not to deform the tube, and install the
switch.

(b) Connect the connector.
2. EVACUATE

AIR

IN

REFRIGERATION

SYSTEM

AND

CHARGE WITH REFRIGERANT
See page

AC–17

Specified amount: 950

±

50 g (33.44

±

1.76 oz)

3.

INSPECTION FOR LEAKAGE OF REFRIGERANT
Using a gas lead tester, check for leakage of refrigerant from
the pressure switch mount.

4.

INSPECT A/C OPERATION

POWER TRANSISTOR

REMOVAL OF POWER TRANSISTOR

1.

REMOVE GLOVE BOX

2.

REMOVE POWER TRANSISTOR

(a) Disconnect

connectors.

(b) Remove the two screws and the power transistor.

INSPECTION OF POWER TRANSISTOR

See page

AC–79

INSTALLATION OF POWER
TRANSISTOR

1.

INSTALL POWER TRANSISTOR

(a) Install power transistor with two screws.
(b) Connect

connectors.

2.

INSTALL GLOVE BOX
See page

BO–112

–

AIR CONDITIONING SYSTEM

Pressure Switch, Power Transistor

AC–137

INSTALLATION OF PRESSURE SWITCH

1.

INSTALL PRESSURE SWITCH

(a) Install the pressure switch to the liquid tube.

Specified torque: 10 N

⋅

m (100 kgf

⋅

cm, 7 ft

⋅

lbf)

HINT: Lock the switch mount on the tube with an open end
wrench, being careful not to deform the tube, and install the
switch.

(b) Connect the connector.
2. EVACUATE

AIR

IN

REFRIGERATION

SYSTEM

AND

CHARGE WITH REFRIGERANT
See page

AC–17

Specified amount: 950

±

50 g (33.44

±

1.76 oz)

3.

INSPECTION FOR LEAKAGE OF REFRIGERANT
Using a gas lead tester, check for leakage of refrigerant from
the pressure switch mount.

4.

INSPECT A/C OPERATION

POWER TRANSISTOR

REMOVAL OF POWER TRANSISTOR

1.

REMOVE GLOVE BOX

2.

REMOVE POWER TRANSISTOR

(a) Disconnect

connectors.

(b) Remove the two screws and the power transistor.

INSPECTION OF POWER TRANSISTOR

See page

AC–79

INSTALLATION OF POWER
TRANSISTOR

1.

INSTALL POWER TRANSISTOR

(a) Install power transistor with two screws.
(b) Connect

connectors.

2.

INSTALL GLOVE BOX
See page

BO–112

–

AIR CONDITIONING SYSTEM

Pressure Switch, Power Transistor

AC–137

A/C CONTROL ASSEMBLY
(A/C ECU)

REMOVAL OF A/C CONTROL ASSEMBLY

1.

REMOVE RADIO AND A/C CONTROL ASSEMBLY
See page

BO–112

2.

REMOVE A/C CONTROL ASSEMBLY
Remove four screws and the A/C control assembly.

INSPECTION OF A/C CONTROL
ASSEMBLY

Judge whether the system is satisfactory or not based on the
”Troubleshooting” procedure on page

AC–21

.

INSTALLATION OF A/C CONTROL
ASSEMBLY

1.

INSTALL A/C CONTROL ASSEMBLY TO RADIO
Install the A/C control assembly to the radio with four screws.

2.

INSTALL RADIO AND A/C CONTROL ASSEMBLY
See page

BO–112

AC–138

–

AIR CONDITIONING SYSTEM

A/C Control Assembly (A/C ECU)