Lexus SC300 / Lexus SC400. Manual — part 457
(b) Place the matchmarks on the both flanges.
(c) Remove the four bolts, washers, nuts and intermediate
shaft.
(d) Insert SST in transmission to prevent oil leakage.
SST 09325–20010
(M/T)
09325–40010 (A/T)
21. REMOVE ENGINE AND TRANSMISSION ASSEMBLY
FROM VEHICLE
(a) Attach the engine hoist chain to the engine hangers.
(b) Remove the two nuts holding the engine to the front
suspension crossmember.
(c) Remove the four bolts, four nuts and rear engine
mounting member.
(d) Lift the engine out of the vehicle slowly and carefully.
NOTICE: Remove carefully without damaging the power
steering gear housing or the park/neutral position switch
(A/T only).
(e) Make sure the engine is clear of all wiring, hoses and
cables.
(f) Place the engine and transmission assembly onto the
stand.
EM–72
–
ENGINE MECHANICAL
Cylinder Block
COMPONENTS FOR SEPARATION AND
ASSEMBLY OF ENGINE AND
TRANSMISSION
SEPARATION OF ENGINE AND
TRANSMISSION
1. (A/T)
REMOVE OIL DIPSTICK GUIDE FOR TRANSMISSION
2. (A/T)
REMOVE OIL COOLER PIPES FOR TRANSMISSION
3.
DISCONNECT ENGINE WIRE FROM TRANSMISSION
4. REMOVE
STARTER
5.
SEPARATE ENGINE AND TRANSMISSION
6. (M/T)
REMOVE CLUTCH COVER AND DISC
–
ENGINE MECHANICAL
Cylinder Block
EM–73
COMPONENTS FOR DISASSEMBLY AND
ASSEMBLY OF CYLINDER BLOCK
EM–74
–
ENGINE MECHANICAL
Cylinder Block
COMPONENTS FOR DISASSEMBLY AND
ASSEMBLY OF CYLINDER BLOCK
(Cont’d)
–
ENGINE MECHANICAL
Cylinder Block
EM–75
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст