Lexus SC300 / Lexus SC400. Manual — part 726
22. REMOVE FUEL RETURN PIPE
(a) Remove the bolt holding the return pipe to the LH
cylinder head.
(b) Remove the union bolt, two gaskets and return pipe.
23. REMOVE DELIVERY PIPES AND INTAKE MANIFOLD
ASSEMBLY
(a) Remove the six bolts and four nuts holding the intake
manifold to the cylinder heads.
(b) Remove the two delivery pipe and intake manifold
assembly.
(c) Remove the two intake manifold gaskets.
24. DISCONNECT HEATER WATER HOSES FROM WATER
BY–PASS PIPE AND REAR WATER BY–PASS JOINT
25. REMOVE
WATER
BY–PASS PIPE
(a) Remove the two mounting bolts.
(b) Pull out the water by–pass pipe from the water pump.
(c) Remove the O–ring from the water by–pass pipe.
26. REMOVE REAR WATER BY–PASS JOINT
Remove the four nuts, water by–pass joint and two gaskets.
–
STARTING SYSTEM
Starter
ST–13
27. REMOVE STARTER
(a) Remove the two bolts holding the starter to the cylinder
block.
(b) Disconnect the starter connector.
(c) Remove the nut, and disconnect the starter wire.
(d) Disconnect the wire clamp from the wire bracket, and
remove the starter.
ST–14
–
STARTING SYSTEM
Starter
COMPONENTS FOR DISASSEMBLY AND
ASSEMBLY
DISASSEMBLY OF STARTER
1.
REMOVE FIELD FRAME AND ARMATURE
(a) Remove the nut, and disconnect the lead wire from the
magnetic switch terminal.
(b) Remove the two through bolts, spring washer, wire
bracket and two O–rings.
(c) Pull out the field frame together with the armature.
(d) Remove the O–ring from the field frame.
–
STARTING SYSTEM
Starter
ST–15
2. REMOVE STARTER HOUSING, CLUTCH ASSEMBLY
AND GEARS
(a) Remove the two mounting screws.
(b) Remove the following parts from the magnetic switch:
(1) Starter
housing
(2) Return
spring
(3) Pinion
gear
(4) Bearing
(5) Idler
gear
(6) Clutch
assembly
3.
REMOVE STEEL BALL
Using a magnetic finger, remove the steel ball from the clutch
shaft hole.
4.
REMOVE BRUSH HOLDER
Using a screwdriver, hold the spring back and disconnect the
brush from the brush holder. Disconnect the four brushes,
and remove the brush holder.
5.
REMOVE ARMATURE FROM FIELD FRAME
ST–16
–
STARTING SYSTEM
Starter
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст