Lexus SC300 / Lexus SC400. Manual — part 148
Wiring and Connector Diagrams
–
BODY ELECTRICAL SYSTEM
Audio System
BE–203
BE–204
–
BODY ELECTRICAL SYSTEM
Audio System
Wiring and Connector Diagrams
–
BODY ELECTRICAL SYSTEM
Audio System
BE–205
Parts Inspection
(Power Switch)
REMOVAL AND INSTALLATION OF
POWER SWITCH
1.
REMOVAL CONTROL PANEL
(a) Remove the console upper panel.
(See BO section)
(b) Remove three screws and the control panel.
2.
INSTALL CONTROL PANEL
For installation, follow the removal procedure in reverse.
INSPECTION OF POWER SWITCH
INSPECT POWER SWITCH
(Continuity)
Inspect continuity between terminals.
Terminal
Switch position
OFF (Power switch released)
ON (Power switch pushed in)
If continuity is not as specified, replace the control panel.
(Resistance)
Inspect resistance between terminals.
Tester connection
Condition
Specified value
11–13
Constant
Approx. 50 k
11–14
Switch knob
A
B
Approx. 0
50 k
If resistance is not as specified, replace the control panel.
(Illumination)
Connect the positive (+) lead from the battery to terminal 2
and the negative (–) lead to terminal 1, check that the illu-
mination light lights up.
If the illumination light does not light up, replace the control
panel.
BE–206
–
BODY ELECTRICAL SYSTEM
Audio System
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст