Lexus RX (2022 year). Manual in english — page 6
104
3-2. Opening, closing and locking the doors
The following functions can be set or
canceled:
For instructions on customizing, refer to
P.480.
*
: If equipped
Automatic door locking and
unlocking systems
Function
Operation
Speed linked
door locking
function
All doors are automati-
cally locked when vehi-
cle speed is
approximately 20
km/h (12 mph) or
higher.
Shift position
linked door lock-
ing function
All doors are automati-
cally locked when shift-
ing the shift lever out of
P.
Shift position
linked door
unlocking func-
tion
All doors are automati-
cally unlocked when
shifting the shift lever
to P.
Driver’s door
linked door
unlocking func-
tion
All doors are automati-
cally unlocked when
driver’s door is
opened.
Back door
*
The back door can be
locked/unlocked and opened by
the following procedures.
WARNING
Observe the following precautions.
Failure to do so may result in death or
serious injury.
■
Before driving the vehicle
Before driving the vehicle, make sure
that the back door is fully closed. If the
back door is not fully closed, it may open
unexpectedly while driving, causing an
accident.
■
Caution while driving
●
Keep the back door closed while driv-
ing.
If the back door is left open, it may hit
nearby objects while driving or luggage
may be unexpectedly thrown out, caus-
ing an accident.
In addition, exhaust gases may enter the
vehicle, causing death or a serious health
hazard. Make sure to close the back
door before driving.
●
Never let anyone sit in the luggage
compartment. In the event of sudden
braking, sudden swerving or a colli-
sion, they are susceptible to death or
serious injury.
■
When children are in the vehicle
Observe the following precautions.
Failure to do so may result in death or
serious injury.
●
Do not allow children to play in the lug-
gage compartment.
If a child is accidentally locked in the lug-
gage compartment, they could have heat
exhaustion or other injuries.
105
3
3-2. Opening, closing and locking the doors
Be
fore
driving
■
Smart entry & start system
Carry the electronic key to enable this
function.
WARNING
●
Do not allow a child to open or close
the back door.
Doing so may cause the back door to
move unexpectedly, or cause the child’s
hands, arms, head, or neck to be caught
by the closing back door.
■
Operating the back door
Observe the following precautions.
Failure to do so may cause parts of the
body to be caught, resulting in death or
serious injury.
●
Remove any heavy loads, such as snow
and ice, from the back door before
opening it. Failure to do so may cause
the back door to suddenly shut again
after it is opened.
●
When opening or closing the back
door, thoroughly check to make sure
the surrounding area is safe.
●
If anyone is in the vicinity, make sure
they are safe and let them know that
the back door is about to open or
close.
●
Use caution when opening or closing
the back door in windy weather as it
may move abruptly in strong wind.
●
The back door may suddenly shut if it is
not opened fully. It is more difficult to
open or close the back door on an
incline than on a level surface, so
beware of the back door unexpectedly
opening or closing by itself. Make sure
that the back door is fully open and
secure before using the luggage com-
partment.
●
When closing the back door, take
extra care to prevent your fingers, etc.,
from being caught.
●
When closing the back door, make
sure to press it lightly on its outer sur-
face. If the back door handle is used to
fully close the back door, it may result
in hands or arms being caught.
●
Do not pull on the back door damper
stay (
P.107) to close the back door,
and do not hang on the back door
damper stay.
Doing so may cause hands to be caught
or the back door damper stay to break,
causing an accident.
●
If a bicycle carrier or similar heavy
object is attached to the back door, it
may suddenly shut again after being
opened, causing someone’s hands,
arms, head or neck to be caught and
injured. When installing an accessory
part to the back door, using a genuine
Lexus part is recommended.
Unlocking and locking the back
door from the outside
106
3-2. Opening, closing and locking the doors
1
Locks all the doors
Check that the door is securely locked.
2
Unlocks all the doors
The doors cannot be unlocked for 3 sec-
onds after the doors are locked.
■
Wireless remote control
P.100
■
Door lock switch
P.102
Raise the back door while pressing up
the back door opener switch.
Lower the back door using a back door
handle, and make sure to push the
back door down from the outside to
close it.
■
Luggage compartment lights
●
The luggage compartment lights turn on
when the back door is opened.
●
When the engine switch is turned off, the
lights will go off automatically after 20
minutes.
■
If the back door opener is inoperative
The back door can be unlocked from the
inside.
1
Remove the cover.
To protect the cover, place a rag between
the flathead screwdriver and cover as
shown in the illustration.
2
Move the lever.
Use a flathead screwdriver to move the
Locking and unlocking the back
door from the inside
Opening the back door from the
outside
When closing the back door
107
3
3-2. Opening, closing and locking the doors
Be
fore
driving
lever.
*
: If equipped
NOTICE
■
Back door damper stays
The back door is equipped with damper
stays
that hold the back door in place.
Observe the following precautions.
Failure to do so may cause damage to
the back door damper stay
, resulting
in malfunction.
●
Do not attach any foreign objects, such
as stickers, plastic sheets, or adhesives
to the damper stay rod.
●
Do not touch the damper stay rod with
gloves or other fabric items.
●
Do not attach any accessories other
than genuine Lexus parts to the back
door.
●
Do not place your hand on the damper
stay or apply lateral forces to it.
A
A
Power back door
*
The power back door can be
opened using the power back door
opener switch, smart entry & start
system or wireless remote control.
WARNING
Observe the following precautions.
Failure to do so may result in death or
serious injury.
■
Before driving the vehicle
Before driving the vehicle, make sure
that the power back door is fully closed. If
the power back door is not fully closed, it
may open unexpectedly while driving,
causing an accident.
■
Caution while driving
●
Keep the power back door closed
while driving.
If the power back door is left open, it may
hit nearby objects while driving or lug-
gage may be unexpectedly thrown out,
causing an accident.
In addition, exhaust gases may enter the
vehicle, causing death or a serious health
hazard. Make sure to close the power
back door before driving.
●
Never let anyone sit in the luggage
compartment. In the event of sudden
braking, sudden swerving or a colli-
sion, they are susceptible to death or
serious injury.
■
When children are in the vehicle
Observe the following precautions.
Failure to do so may result in death or
serious injury.
108
3-2. Opening, closing and locking the doors
WARNING
●
Do not allow children to play in the lug-
gage compartment.
If a child is accidentally locked in the lug-
gage compartment, they could have heat
exhaustion or other injuries.
●
Do not allow a child to open or close
the power back door.
Doing so may cause the power back
door to move unexpectedly, or cause the
child’s hands, arms, head, or neck to be
caught by the closing power back door.
■
Operating the power back door
Observe the following precautions.
Failure to do so may cause parts of the
body to be caught, resulting in death or
serious injury.
●
Remove any heavy loads, such as snow
and ice, from the power back door
before opening it. Failure to do so may
cause the power back door to sud-
denly shut again after it is opened.
●
When opening or closing the power
back door, thoroughly check to make
sure the surrounding area is safe.
●
If anyone is in the vicinity, make sure
they are safe and let them know that
the power back door is about to open
or close.
●
Use caution when opening or closing
the power back door in windy weather
as it may move abruptly in strong wind.
●
The power back door may suddenly
shut if it is not opened fully. It is more
difficult to open or close the back door
on an incline than on a level surface, so
beware of the back door unexpectedly
opening or closing by itself. Make sure
that the back door is fully open and
secure before using the luggage com-
partment.
●
When closing the power back door,
take extra care to prevent your fingers,
etc., from being caught.
●
When closing the power back door,
make sure to press it lightly on its outer
surface. If the back door handle is used
to fully close the power back door, it
may result in hands or arms being
caught.
●
Do not pull on the back door spindle
(
P.116) to close the power back door,
and do not hang on the back door
spindle.
Doing so may cause hands to be caught
or the back door spindle to break, caus-
ing an accident.
109
3
3-2. Opening, closing and locking the doors
Be
fore
driving
■
Smart entry & start system
Carry the electronic key to enable this
function.
1
Locks all the doors
Check that the door is securely locked.
2
Unlocks all the doors
The doors cannot be unlocked for 3 sec-
onds after the doors are locked.
■
Wireless remote control
P.98
■
Door lock switch
P.102
■
Opening/closing the power back
door using the wireless remote
control
Press and hold the switch for approxi-
mately 1 second.
The power back door can be operated
when it is unlocked
*
.
Pressing the switch while the power back
door is opening/closing will stop the oper-
ation.
Pressing and holding the switch again for
approximately 1 second will operate the
power back door in the opposite direction.
*
: Opening of the power back door when it
is locked can be enabled by a custom-
ized setting. (
P.480)
■
Opening/closing the power back
door from the inside
Press and hold the switch for approxi-
mately 1 second.
WARNING
●
If a bicycle carrier or similar heavy
object is attached to the power back
door, it may suddenly shut again after
being opened, causing someone’s
hands, arms, head or neck to be
caught and injured. When installing an
accessory part to the power back
door, using a genuine Lexus part is
recommended.
Unlocking and locking the
power back door from the out-
side
Unlocking and locking the
power back door from the inside
Opening/closing the power back
door
110
3-2. Opening, closing and locking the doors
A buzzer will sound and the power back
door will automatically open or close.
However, if the power back door is locked,
it will not open.
Pressing the switch while the power back
door is opening/closing will stop the oper-
ation.
Pressing and holding the switch again for
approximately 1 second will operate the
power back door in the opposite direction.
■
Back door opener switch
Open
When the power back door is unlocked:
Press the back door opener switch.
When the power back door is locked:
While carrying an electronic key, press and
hold the back door opener switch.
A buzzer will sound and the power back
door will automatically open.
Pressing the switch while the power back
door is opening/closing will stop the oper-
ation.
Close
Press the
switch.
A buzzer will sound and the power back
door will automatically close.
Pressing the
switch while the power
back door is closing will stop the operation.
Pressing the switch again will open the
power back door automatically.
Close the back door and lock all
doors (close & lock function)
Press the
switch.
The power back door will close and all of
the doors will be locked at the same time.
A different buzzer than the normal one will
sound and the power back door will begin
closing automatically. When the power
back door is closed, all of the doors will
lock simultaneously and operation signals
will indicate that all of the doors have been
locked.
If the
switch is pressed while the power
back door is closing, the operation will
stop.
Pressing the switch again will open the
power back door automatically.
The double locking system will not operate
at this time.
111
3
3-2. Opening, closing and locking the doors
Be
fore
driving
■
Closing the power back door using
the back door handle
Lower the power back door using the
back door handle, then a buzzer will
sound and the power back door will
automatically close.
■
Hands Free Power Back Door (if
equipped)
1
While carrying an electronic key,
stand within the smart entry & start
system operation range, approxi-
mately 50 to 60 cm (19.7 to 23.6
in.) from the rear bumper.
Kick sensor
Hands Free Power Back Door
operation detection area
Smart entry & start system opera-
tion detection area (
P.120)
2
Perform a kick operation by mov-
ing your foot to within approxi-
mately 10 cm (3.9 in.) of the rear
bumper and then pulling it back.
Perform the entire kick operation
within 1 second.
The Hands Free Power Back Door
will not start operating while a foot is
detected under the rear bumper.
Operate the Hands Free Power
Back Door without contacting the
rear bumper with your foot.
If another electronic key is in the
cabin or luggage compartment, it
may take slightly longer than normal
for the operation to occur.
Kick sensor
Hands Free Power Back Door
operation detection area
3
When the kick sensor detects that
your foot is pulled back, a buzzer
will sound and the power back door
will automatically fully open/close.
A
B
C
A
B
112
3-2. Opening, closing and locking the doors
If kick operation is performed again in the
middle of back door operating, the opera-
tion will stop.
■
Hands free close & lock function*
(vehicles with Hands Free Power
Back Door)
*
: This setting can be customized by your
Lexus dealer.
If the power back door is closed using a
Hands Free Power Back Door close
operation, all of the doors will be
locked at the same time.
A different buzzer than the normal one will
sound before the power back door begins
to close. The door lock operation signals
will operate to indicate that the power back
door has closed and all of the doors have
locked simultaneously.
If a Hands Free Power Back Door opera-
tion is performed while the power back
door is operating, the power back door will
stop.
If a Hands Free Power Back Door opera-
tion is performed again, the power back
door will open.
■
Luggage compartment lights
●
The luggage compartment lights turn on
when the back door is opened.
●
When the engine switch is turned off, the
lights will go off automatically after 20
minutes.
■
Power back door operating conditions
If the following conditions are met with the
power back door operation enabled, the
power back door can be opened and
closed automatically.
●
The power back door is unlocked. How-
ever, the power back door will operate if
it is locked, in the following situations:
• When an electronic key is being carried
and the back door opener switch is
pressed.
• When opening of the power back door
using the wireless remote control when it
is locked is enabled. (
P.480)
●
When the engine switch is in IGNITION
ON mode, the vehicle speed must be
lower than 3 km/h (2 mph) and one of
the following conditions must be met in
addition to the above conditions:
• The parking brake is engaged.
• The brake pedal is depressed.
• The shift lever is in P.
■
Close & lock function operating condi-
tions
This function can be operated when all of
the following conditions are met:
• An electronic key is not detected within
the vehicle.
• All of the doors other than the power
back door are closed.
• The engine switch is off.
■
Hands Free Power Back Door operating
conditions (if equipped)
●
The Hands Free Power Back Door (kick
sensor) setting is on.
●
When an electronic key is carried within
the operation range.
■
Hands free close & lock function oper-
ating conditions (vehicles with Hands
Free Power Back Door)
This function can be operated when all of
the following conditions are met:
• The hands free close & lock function set-
ting is on.
• The Hands Free Power Back Door oper-
ating conditions are met.
• An electronic key is not detected within
the vehicle.
• All of the doors other than the power
back door are closed.
• The engine switch is off.
■
Back door closer
In the event that the power back door is left
slightly open, the back door closer will auto-
matically close it to the fully closed position.
113
3
3-2. Opening, closing and locking the doors
Be
fore
driving
●
The back door closer can function when
the engine switch is in any mode.
●
The power back door can be opened
using the back door opener switch even if
the back door closer is operating.
■
Operation of the power back door
●
When the power back door begins to
operate, a buzzer will sound.
●
When the power back door is disabled,
the power back door will not operate but
can be opened and closed manually.
●
The power back door turns to manual
operation when the back door opener
switch is pressed while the power back
door is in an automatic opening/closing
operation.
●
If anything obstructs the power back
door while opening, a buzzer will sound
and the power back door will stop imme-
diately. If anything obstructs the power
back door while closing, a buzzer will
sound and the power back door will auto-
matically move slightly in the opposite
direction and then stop.
■
Back door reserve lock function
This function reserves the locking of the
power back door when the power back
door is open. If the following operations are
performed, all of the doors except the
power back door will lock and then the
power back door will lock when it is com-
pletely closed.
1
Close all of the doors, except the power
back door.
2
Perform an automatic closing operation
of the power back door and lock the
doors using the wireless remote control
(
P.98) or smart entry & start system
(
P.100) while the power back door is
closing.
Also, if the back door does not fully close
due to the operation of the jam protection
function, etc., while the back door is auto-
matically closing after a reserve lock opera-
tion is performed, the reserve lock function
is canceled and all the doors will unlock.
■
Situations in which the close & lock
function may not operate properly
In the following situations, the close & lock
function may not operate properly:
●
If the
switch on the lower part of the
power back door (
P.110) is pressed by
a hand which is holding an electronic key
●
If the
switch on the lower part of the
power back door (
P.110) is pressed
when the electronic key is in a bag, etc.
that is placed on the ground
●
If the
switch on the lower part of the
power back door (
P.110) is pressed
with the electronic key not near the vehi-
cle.
■
Situations in which the Hands Free
Power Back Door may not operate
properly (if equipped)
In the following situations, the Hands Free
Power Back Door may not operate prop-
erly:
●
When a foot remains under the rear
bumper
●
If the rear bumper is strongly hit with a
foot or is touched for a while
If the rear bumper has been touched for a
while, wait for a short time before
attempting to operate the Hands Free
Power Back Door again.
●
When standing excessively close to the
rear bumper
●
When an external radio wave source
interferes with the communication
between the electronic key and the vehi-
cle (
P.121)
●
When the vehicle is parked near metal, or
an external radio wave or electrical noise
source which affects the sensitivity of the
Hands Free Power Back Door, such as a
pay parking spot, gas station, electrically
heated road, fluorescent light, or metal
plate
●
When the vehicle is near a TV tower,
electric power plant, radio station, large
display, airport or other facility that gen-
erates strong radio waves or electrical
114
3-2. Opening, closing and locking the doors
noise
●
When a large amount of water is applied
to the rear bumper, such as when the
vehicle is being washed or in heavy rain
●
When mud, snow, ice, etc. is attached to
the rear bumper
●
When the vehicle has been parked for a
while near objects that may move and
contact the rear bumper, such as plants
●
When an accessory is installed to the rear
bumper
If an accessory has been installed, turn the
Hands Free Power Back Door (kick sen-
sor) operation setting off.
●
RX350L with a compact spare tire:
When a tire other than the spare tire is
stored in the spare tire storage area
■
Preventing unintentional operation of
the Hands Free Power Back Door (if
equipped)
When an electronic key is in the operation
detection area, the Hands Free Power Back
Door may operate unintentionally, so be
careful in the following situations:
●
When a large amount of water is applied
to the rear bumper, such as when the
vehicle is being washed or in heavy rain
●
When dirt is wiped off the rear bumper
●
When a small animal or small object, such
as a ball, moves under the rear bumper
●
When an object is moved from under the
rear bumper
●
If someone is swinging their legs while sit-
ting on the rear bumper
●
If the legs or another part of someone’s
body contacts the rear bumper while
passing by the vehicle
●
When the vehicle is parked near an elec-
trical noise source which affects the sen-
sitivity of the Hands Free Power Back
Door, such as a pay parking spot, gas sta-
tion, electrically heated road, or fluores-
cent light
●
When the vehicle is near a TV tower,
electric power plant, radio station, large
display, airport or other facility that gen-
erates strong radio waves or electrical
noise
●
When the vehicle is parked in a place
where objects such as plants are near the
rear bumper
●
If luggage, etc. is set near the rear
bumper
●
If accessories or a vehicle cover is
installed/removed near the rear bumper
●
When the vehicle is being towed
To prevent unintentional operation, turn the
Hands Free Power Back Door (kick sensor)
operation setting off.
■
When reconnecting the battery
To enable the power back door to operate
properly, close the power back door manu-
ally.
■
Jam protection function
Sensors are installed in the right and left
sides of the power back door. When the
door is automatically closing and the sen-
sors are pushed due to an object being
caught, etc., the jam protection function will
operate.
From that position the door will automati-
cally move a little in the opposite direction
and then the function will stop.
■
If the power back door opener is inoper-
ative
The power back door can be unlocked from
the inside
1
Remove the cover.
To protect the cover, place a rag between
the flathead screwdriver and cover as
115
3
3-2. Opening, closing and locking the doors
Be
fore
driving
shown in the illustration.
2
Move the lever.
■
Customization
Some functions can be customized.
(
P.480)
WARNING
■
Back door closer
●
In the event that the power back door
is left slightly open, the back door
closer will automatically close it to the
fully closed position. It takes several
seconds before the back door closer
begins to operate. Be careful not to get
fingers caught or anything else in the
power back door, as this may cause
bone fractures or other serious inju-
ries.
●
Use caution when using the back door
closer as it still operates when the
power back door system is disabled.
■
Power back door
Observe the following precautions when
operating the power back door.
Failure to do so may cause death or seri-
ous injury.
●
Check the safety of the surrounding
area to make sure there are no obsta-
cles or anything that could cause any
of your belongings to get caught.
●
If anyone is in the vicinity, make sure
they are safe and let them know that
the power back door is about to open
or close.
●
If the power back door system is disa-
bled while the power back door is
operating, the power back door will
stop operating. The power back door
must then be operated manually. Take
extra care in this situation, as the
power back door may open or close
suddenly.
●
If the operating conditions of the
power back door (
P.112) are no
longer met, a buzzer may sound and
the power back door may stop open-
ing or closing. The power back door
must then be operated manually. Take
extra care on an incline in this situation,
as the power back door may move
suddenly.
●
On an incline, the power back door
may suddenly shut after it opens. Make
sure the power back door is fully open
and secure.
●
In the following situations, the power
back door may detect an abnormality
and automatic operation may be
stopped. In this case, the power back
door must then be operated manually.
Take extra care in this situation, as the
stopped power back door may sud-
denly open or close, causing an acci-
dent.
• When the power back door contacts
an obstacle
116
3-2. Opening, closing and locking the doors
WARNING
• When the battery voltage suddenly
drops, such as when the engine switch
is turned to IGNITION ON mode or
the engine is started during automatic
operation
●
If a bicycle carrier or similar heavy
object is attached to the power back
door, the power back door may not
operate, causing a malfunction, or the
power back door may suddenly shut
again after being opened, causing
someone’s hands, arms, head or neck
to be caught and injured. When install-
ing an accessory part to the power
back door, using a genuine Lexus part
is recommended.
■
Jam protection function
Observe the following precautions.
Failure to do so may cause death or seri-
ous injury.
●
Never use any part of your body to
intentionally activate the jam protec-
tion function.
●
The jam protection function may not
work if something gets caught just
before the power back door fully
closes. Be careful not to get fingers
caught or anything else.
●
The jam protection function may not
work depending on the shape of the
object that is caught. Be careful not to
catch fingers or anything else.
■
Hands Free Power Back Door (if
equipped)
Observe the following precautions.
Failure to do so may cause death or seri-
ous injury.
●
Check the safety of the surrounding
area to make sure there are no obsta-
cles or anything that could cause any
of your belongings to get caught.
●
Exhaust gasses cause the exhaust
pipes to become quite hot. When
operating the Hands Free Power Back
Door, be careful not to touch the
exhaust pipe.
●
Do not operate the Hands Free Power
Back Door if there is little space under
the rear bumper.
NOTICE
■
Back door spindles
The power back door is equipped with
spindles
that hold the power back
door in place.
Observe the following precautions.
Failure to do so may cause damage to
the back door spindle
, resulting in
malfunction.
●
Do not attach any foreign objects, such
as stickers, plastic sheets, or adhesives
to the spindle rod.
●
Do not attach any accessories other
than genuine Lexus parts to the power
back door.
●
Do not place your hand on the spindle
or apply lateral forces to it.
■
To prevent back door closer malfunc-
tion
●
Do not apply excessive force to the
power back door while the back door
closer is operating. Applying excessive
force may cause the back door closer
to malfunction.
A
A
117
3
3-2. Opening, closing and locking the doors
Be
fore
driving
NOTICE
●
If the power back door is opened and
closed repeatedly in a short amount of
time, the back door closer may stop
operating. In this case, manually open
the power back door once and wait for
a while before attempting to close it
again.
■
To prevent malfunction of the power
back door
●
Make sure that there is no ice between
the power back door and frame that
would prevent movement of the power
back door. Operating the power back
door when excessive load is present
on the power back door may cause a
malfunction.
●
Do not apply excessive force to the
power back door while the power
back door is operating.
●
Take care not to damage the sensors
installed on the right and left edges of
the power back door (
P.114) with a
knife or other sharp object. If a sensor
is disconnected, the power back door
will not close automatically.
■
Close & lock function/Hands free
close & lock function
When closing the power back door using
the close & lock function/hands free
close & lock function, a different buzzer
than the normal one will sound before
the operation begins.
To check that the operation has started
correctly, check that a different buzzer
than the normal one has sounded.
Additionally, when the power back door
is fully closed and locked, operation sig-
nals will indicate that all of the doors have
been locked.
Before leaving the vehicle, make sure
that the operational signals have oper-
ated and that all of the doors are locked.
■
Hands Free Power Back Door pre-
cautions (if equipped)
The kick sensor is located behind lower
center part of the rear bumper. Observe
the following to ensure that the Hands
Free Power Back Door function operates
properly:
●
Keep the lower center part of the rear
bumper clean at all times.
If the lower center part of the rear
bumper is dirty or covered with snow, the
Hands Free Power Back Door may not
operate. In this situation, clean off the dirt
or snow, move the vehicle from the cur-
rent position and then check if the Hands
Free Power Back Door operates. If it
does not operate, have the vehicle
inspected by any authorized Lexus
retailer or Lexus authorized repairer, or
any reliable repairer.
●
Do not apply coatings that have a rain
clearing (hydrophilic) effect, or other
coatings, to the lower center part of
the rear bumper.
●
Do not park the vehicle near objects
that may move and contact the lower
center part of the rear bumper, such as
grass or trees.
If the vehicle has been parked for a while
near objects that may move and contact
the lower center part of the rear bumper,
such as grass or trees, the Hands Free
Power Back Door may not operate. In
this situation, move the vehicle from the
current position and then check if the
Hands Free Power Back Door operates.
If it does not operate, have the vehicle
inspected by any authorized Lexus
retailer or Lexus authorized repairer, or
any reliable repairer.
118
3-2. Opening, closing and locking the doors
The power back door system can be
enabled/disabled on the multi-informa-
tion display. (
P.79)
1
Press
or
of the meter con-
trol switches and select
.
2
Press
or
of the meter con-
trol switches, select the “Vehicle
Settings” and then press
.
3
Press
or
of the meter con-
trol switches, select
and
then press
.
4
Press
or
of the meter con-
trol switches, and then select
“PBD”.
5
ON and OFF will be switched over
with presses of
on the meter
control switches.
When OFF is selected and the operations
of the power back door is made to stop
from the
of multi-information display,
unless it is set to ON, the operation of the
power back door will not return. (No
return in the engine switch operation)
The Hands Free Power Back Door
(kick sensor) can be enabled/disabled
on the multi-information display.
(
P.79)
1
Press
or
of the meter con-
trol switches and select
.
2
Press
or
of the meter con-
trol switches, select the “Vehicle
Settings” and then press
.
3
Press
or
of the meter con-
trol switches, select
and
then press
.
4
Press
or
of the meter con-
trol switches, and then select “Kick
Sensor”.
NOTICE
●
Do not subject the rear bumper or its
surrounding area to a strong impact.
If the rear bumper or its surrounding area
has been subjected to a strong impact,
the Hands Free Power Back Door may
not operate properly.
If the Hands Free Power Back Door does
not operate in the following situations,
have the vehicle inspected by any
authorized Lexus retailer or Lexus
authorized repairer, or any reliable
repairer.
• The kick sensor or its surrounding area
has been subjected to a strong impact.
• The lower center part of the rear
bumper is scratched or damaged.
●
Do not disassemble the rear bumper.
●
Do not attach stickers to the rear
bumper.
●
Do not paint the rear bumper.
●
If a bicycle carrier or similar heavy
object is attached to the power back
door, disable the Hands Free Power
Back Door (kick sensor).
Canceling the power back door
system
Canceling the Hands Free
Power Back Door (if equipped)
119
3
3-2. Opening, closing and locking the doors
Be
fore
driving
5
ON and OFF will be switched over
with presses of
on the meter
control switches.
When OFF is selected and the operations
of the Hands Free Power Back Door is
made to stop from the
of multi-infor-
mation display, unless it is set to ON, the
operation of the Hands Free Power Back
Door will not return. (No return in the
engine switch operation)
The open position of the power back-
door can be adjusted.
1
Stop the power back door at the
desired position. (
P.109)
2
Press and hold the
switch on
the lower part of the power back
door for 2 seconds.
When setting is complete, a buzzer
will sound 4 times.
The next time the power back door
is opened, it will stop at that position.
■
Returning the power back door opening
position to the default setting
Press and hold the
switch on the
lower part of the power back door for 7
seconds.
A buzzer will sound twice. The next time
the power back door is opened, it will open
to the default position.
■
Customization
The opening position can be set with the
navigation system or multimedia system.
Priority for the stop position is given to the
last position set by either the
switch,
navigation system or multimedia system.
(Customizable features:
P.480)
Adjusting the open position of
the power back door
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст