Mercedes-Benz ML320. Manual — part 563
MODELS 124, 129, 140, 163 up to 30.11.99, 163 as of 1.9.01, 168, 170, 201, 202, 208, 210, 215, 220
EXPLANATION OF SYMBOLS FOR TESTERS AND COMPONENTS - AD00.00-P-2000-01A
0.0 [] 1
Key to diagnostics
symbols
AD00.00-P-2001A
0.0 [] 2
Diagnosis assignment
except models 215, 220
AD00.00-P-2002A
0.0 [] 3
Connect test equipment
diagnosis
except model 215
AD00.00-P-2003A
0.0 [] 4
Diagnostic procedure
only for vehicle systems
that can be diagnosed using
STAR DIAGNOSIS
AD00.00-P-2004A
Description
Logo
Description
Logo
Description
Logo
ABS Adapter
Battery
Short-circuit
35-pin socket
box
Direct current
generator
Short-circuit to
ground
126-pin socket
box
Direct current
motor
Open-circuit
Function
generator
Capacitor
Multimeter
alternating
voltage type of
measurement
Hand-Held
Tester
Coil
Multimeter
resistance type of
measurement
Pulse counter
Resistance
Function
generator square-
wave signal shape
Lambda control
tester
Ground
Function
generator
sinusoidal signal
shape
Pressure gauge
In order
Oscilloscope
Multimeter
Fault
Adapter cable
with light-
emitting diode
Decade resistor
Greater than
>
Multimeter direct
current type of
measurement
Bridge
Less than
<
Multimeter
alternating
current type of
measurement
2004 Mercedes-Benz ML350
1998-2005 GENINFO Overall vehicle - 163 Chassis
me
ASSIGNMENT OF DATA LINK CONNECTOR - AD00.00-P-2000-02C
Hazardous
voltage
Short-circuit to
positive
Multimeter direct
voltage type of
measurement
Brake lining
wear indicator
Plug
Socket
Description
Logo
Description
Logo
Description
Logo
Program heating
(1st cut-in time)
Air up and down
Air Drying
Program heating
(2nd cut-in time)
Standard setting
Cooling mode
(standard setting)
Cut-in time
Economy setting
Air conditioning
Off
Time of day
display
Air to center and
side outlet
Air conditioning
On/Off (USA
only)
Instant heat
Minimum air
volume
Off (no air
supply)
Return flow
Maximum air
volume
° Celsius
Supply
Automatic blower
control
° Fahrenheit
Air upwards
Defrosting
Residual heat
Air upwards,
downwards,
doors
Automatic mode
Air downwards
Recirculated air
2004 Mercedes-Benz ML350
1998-2005 GENINFO Overall vehicle - 163 Chassis
me
Fig. 326: Identifying Data Link Connector
CONNECTING HAND-HELD TESTER (HHT), READING OUT FAULT MEMORY - AD00.00-P-2000-03A
Commercially available tools
1. Connect Hand-Held Tester (087) with test cable (Multiplexer) (094) to data link connector (DTC readout)
(X11/4).
2. Switch on ignition.
3. According to instructions on display:
a. Read out/erase fault memory
b. Read out actual values
c. Perform actuations
d. Program control modules
4. Disconnect HHT.
Number
Designation
WH58.30-Z-1036-13A
Handheld tester (HHT)
651 100 01 99
WH58.30-Z-1037-13A
Test cable (multiplexer)
651 100 40 99
2004 Mercedes-Benz ML350
1998-2005 GENINFO Overall vehicle - 163 Chassis
me
Fig. 327: Connecting Hand-Held Tester (HHT) For Reading Out Fault Memory
Observe system-specific deviations which are listed for the appropriate diagnosis description in the chapter
"Advanced Information on diagnosis".
Stored faults which can be caused by disconnected cables or a simulation during test work must be erased in the
fault memory upon completion of the work.
CONNECT HAND-HELD TESTER (HHT), READ OUT DIAGNOSTIC TROUBLE CODE MEMORY - AD00.00-P-2000-03C
Model 163 up to 31.08.01
Model 168
Commercially available tools
1. Connect hand-held tester (087) to diagnosis test connector (X11/4) in interior using test cable
(multiplexer) (094) and adapter cable (107).
2. Switch on ignition.
3. According to instructions in display:
a. Read out/erase fault memory
b. Read out actual values
c. Perform actuations
d. Program control modules
4. Disconnect HHT.
Number
Designation
WH58.30-Z-1036-13A
Handheld tester (HHT)
651 100 01 99
WH58.30-Z-1037-13A
Test cable (multiplexer)
651 100 40 99
WH58.30-Z-1044-13A
Adapter cable (HHT) for datalink connector (X11/4, 16-pin)
2004 Mercedes-Benz ML350
1998-2005 GENINFO Overall vehicle - 163 Chassis
me
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст