Mercedes-Benz ML320. Manual — part 483
Fig. 69: Identifying Thrust Piece (129 589 10 63 00)
Fig. 70: Identifying Base (163 589 01 43 00)
Fig. 71: Identifying Press (163 589 03 43 00)
REPLACE SHAFT SEAL ON DRIVE PINION - AR33.30-P-0530GH
MODEL 163.113 /128 /136 /154 /157 /172 /174 /175
2001 Mercedes-Benz ML320
1998-2005 DRIVELINE/AXLES Front Axle - 163 Chassis
me
Fig. 72: Identifying Drive Flange & Hexagon Collar Nut
Fig. 73: Counterholding Drive Flange Using Retainer Wrench
Fig. 74: Identifying Drift
Fig. 75: Identifying Radial Sealing Ring
Modification notes
8.1.07 Filling capacity, Specifications for Operating Fluids
Model 163 *BF33.30-P-1001-03B
Remove/install
Notes on self-locking nuts
AH00.00-N-
2001 Mercedes-Benz ML320
1998-2005 DRIVELINE/AXLES Front Axle - 163 Chassis
me
Propeller shaft of front axle gear
Front axle gear
and bolts
All models
0001-01A
1
Unbolt propeller shaft at
flange on front axle
transmission
*BA41.20-P-
1001-01A
2
Measure and note friction
torque
AR33.30-P-
0470-04GH
Connection piece
Fig. 63
Torque meter
Fig. 64
41 mm socket wrench bit, hexagon, 3/4 inch
square
3
Loosen and remove hexagon
collar nut (14b)
Installation: Replace hexagon collar nut and
locking plate.
Tighten hexagon collar nut in stages until the
previously measured friction torque is obtained.
Secure hexagon collar nut.
Counterhold drive flange using retainer wrench
(092).
Retainer wrench
Fig. 78
4
Detach drive flange (14c)
5
Press out radial sealing ring
(14d) using a suitable tool
Installation: Drive in radial sealing ring using
drift (093). Replace radial sealing ring and coat lip
with universal hypoid gear oil:
Universal hypoid gear oils
(SAE 85 W-90)
BB00.40-P-
0235-07A
Drift
Fig. 79
6
Install in the reverse order
7
Check front axle oil level
*BF33.30-P-
1001-03B
Number
Designation
Model 163
BA41.20-P-1001-01A
Self-locking bolt of propeller shaft to front-axle gear flange
Nm 40
Number
Designation
Model 163
BF33.30-P-1001-
03B
Filling capacity
Front axle gear
Liters 1.2
Specifications for
Operating Fluids
Sheet BB00.40-P-0235-
07B
2001 Mercedes-Benz ML320
1998-2005 DRIVELINE/AXLES Front Axle - 163 Chassis
me
Fig. 76: Identifying Connecting Piece (100 589 02 59 00)
Fig. 77: Identifying Torque Meter (001 589 49 21 00)
Fig. 78: Identifying Retainer Wrench (163 589 00 07 00)
Fig. 79: Identifying Drift (163 589 00 15 00)
REMOVE/INSTALL RADIAL SHAFT SEAL AT FRONT AXLE GEAR OF FRONT AXLE SHAFT - AR33.30-P-0545GH
MODEL 163.113 /128 /136 /154 /157 /172 /174 /175
2001 Mercedes-Benz ML320
1998-2005 DRIVELINE/AXLES Front Axle - 163 Chassis
me
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст