Mercedes-Benz ML320. Manual — part 322
fit on top part of housing.
Fig. 357: Identifying Telephone Wiring Harness
8. Fit connection cable of telephone wiring harness (2) to spiral cable (comes from radio slot). Pull foam
rubber grommet over connector.
9. Push telephone console (12) below the wood trim cover (arrows) and press against right tunnel wall.
10. Mark hole for screw (13) and drill with Ø 5 mm.
When drilling, pull tunnel wall out slightly so that parts behind cannot be damaged.
11. Install clip nut (14) on tunnel wall and install screw (13).
12. Push connection cable (2) below tunnel wall.
Fig. 358: Pushing Telephone Console
RETROFIT TELEPHONE CONSOLE - AZ82.70-P-0001-01G
MODEL 163 as of 1.10.01
1. Lay assembly plate (10) on telephone console (12) and align as shown in figure. Mark hole pattern and
drill with 2.5 dia. bit.
2. Screw assembly plate (10) onto telephone console (12) with screws (11).
2001 Mercedes-Benz ML320
1998-2005 ACCESSORIES & BODY, CAB Electrical System - Body - 163 Chassis
me
Fig. 359: Identifying Telephone Console And Assembly Plate
3. Insert mount (1) into assembly plate (10) and install spiral cable into groove (arrow) of telephone console
(12) together with grommet.
Fig. 360: Identifying Mount, Assembly Plate And Telephone Console
4. Screw mount for console (14) to instrument panel with upper right mounting screw (arrow) of air
conditioning control module.
Holder for console (14) must be installed behind A/C control panel.
2001 Mercedes-Benz ML320
1998-2005 ACCESSORIES & BODY, CAB Electrical System - Body - 163 Chassis
me
Fig. 361: Identifying Console And Screw
5. Route tieouts (A and B) for cellular telephone wiring harness (2) and antenna lead (17) to console (12)
and connect.
6. Form excess lengths of the connection cables into a loop and secure with Velcro (18).
7. Route cables for connection plug (5) behind the center console to the right seat.
Fig. 362: Identifying Cellular Telephone Wiring Harness And Antenna Lead
8. Insert console (12) into mount holes on air conditioning control module using locating pin and align at
instrument panel.
9. Mark hole for screw (13) and drill with 2.5 mm dia. bit.
When drilling in instrument panel do not damage parts behind.
10. Screw console (12) to instrument panel with screw (13).
2001 Mercedes-Benz ML320
1998-2005 ACCESSORIES & BODY, CAB Electrical System - Body - 163 Chassis
me
Fig. 363: Identifying Console And Screw
11. Expose tied-back cables with coupling (5) behind the front passenger seat.
Fig. 364: Identifying Coupling
12. Connect antenna lines (arrow) and insulated with Velcro.
Fig. 365: Identifying Antenna Lines
13. Connect blue coupling to connection plug (5).
14. Tie back cables under the seat and secure with Velcro.
2001 Mercedes-Benz ML320
1998-2005 ACCESSORIES & BODY, CAB Electrical System - Body - 163 Chassis
me
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст