Mercedes-Benz ML320. Manual — part 229
REAR WINDOW WIPER MOTOR, FUNCTION - GF82.30-P-4106-01GH
The rear window wiper motor (M6/4) is controlled by the all-activity module (AAM) (N10) Wiper
operation :
The rear window wiper is in the non-actuated position and the cam switch is therefore actuated. The relay is
actuated by the AAM. The rear window wiper motor (M6/4) starts running . The cam switch is released. The
motor then continues to run even when the relay is no longer actuated. Upon reaching the park position the cam
switch is actuated. If the relay is no longer actuated the motor is stopped by short circuiting through a coil.
Fig. 30: Identifying Rear Window Wiper Motor Function
REAR WINDOW WIPER MOTOR, DESIGN - GF82.30-P-4106-02GH
The rear window wiper is driven by the rear window wiper motor (M6/4) with a cam switch (1) on the output
shaft. A temperature switch serves for overload protection.
with two normally open
contacts.
An LED indicator will be
added starting 1.9.2000.
Function
GF82.30-P-4105-01GH
2001 Mercedes-Benz ML320
1998-2005 ACCESSORIES & BODY, CAB Electrical System - Body - 163 Chassis
me
Fig. 31: Identifying Rear Window Wiper Motor And Cam Switch
REAR WINDOW WIPER MOTOR, LOCATION/PURPOSE/DESIGN/FUNCTION - GF82.30-P-4106GH
MODEL 163
SURVEY OF SYSTEM COMPONENTS WIPER SYSTEM (WS), LOCATION/ PURPOSE/DESIGN/FUNCTION - GF82.30-P-
9998GH
MODEL 163
Location
GF82.30-P-0004-01GH
Purpose
Driving rear window
wiper.
Design
GF82.30-P-4106-02GH
Function
GF82.30-P-4106-01GH
Wiper motor, location /
purpose / design /
function
GF82.30-P-4104GH
Rear window wiper /
washer switch, location /
purpose / design /
function
GF82.30-P-4105GH
Rear window wiper
motor, location /
purpose / design /
function
GF82.30-P-4106GH
Washer pump, location /
purpose / design /
function
GF82.35-P-4101A
2001 Mercedes-Benz ML320
1998-2005 ACCESSORIES & BODY, CAB Electrical System - Body - 163 Chassis
me
REAR WASH - FUNCTION - GF82.35-P-3001GH
MODEL 163
The rear wash function is activated by placing the rear wiper/ washer switch (S78) in the down position. The
switch contact connects the tailgate washer pump (M5/3) to terminal 15. The All Activity Module (AAM)
(N10) detects the activation of the switch via the second switch contact and actuates the tailgate washer motor
(M6/4) and the tailgate washer fluid pump (M5/3) for as long as the switch is on.
The activation time for the tailgate washer fluid pump (M5/3) is limited to 15 sec. To reactivate the pump, the
button must be pressed again.
To wipe window dry, the tailgate wiper motor (M6/4) remains activated for five seconds after the switch is
released.
As described for the rear wiper function, a relay circuit in the wiper motor stops the wiper in the park position .
WINDSHIELD WASH - FUNCTION - GF82.35-P-3002GH
MODEL 163
The windshield wash function is activated by pulling the combination switch, washer switch (S4s4) towards
the steering column. The switch contact connects the washer pump (M5/1) to terminal 15R. The All Activity
Module (AAM) (N10) detects switch activation via an input that measures power supply to the washer pump
(M5/1).
If the combination switch (S4) is in the Wiper Off or Intermittent position, the AAM activates the wiper
motor (M6/1) via relay F1k17 . To wipe windshield dry, the motor continues to operate after the switch has
Rear window washer
pump, location /
purpose / design /
function
GF82.35-P-4103GH
Table of contents,
function description,
wiper system (WS)
GF82.30-P-0998GH
Rear Wipe
GF82.30-P-3004GH
Rear Wiper/Washer
Switch
GF82.30-P-4105GH
Tailgate Wiper Motor
GF82.30-P-4106GH
Tailgate Washer Pump
GF82.35-P-4103GH
All Activity Module
To 30.11.99
GF54.21-P-4100GH
As of 1.12.99
GF54.21-P-4100GK
2001 Mercedes-Benz ML320
1998-2005 ACCESSORIES & BODY, CAB Electrical System - Body - 163 Chassis
me
been released until the AAM detects three operations of the cam-operated switch.
WASHER PUMP, FUNCTION - GF82.35-P-4101-01GH
The motor for the washer pump (M5/1) is switched on and off by the single wipe/wash switch (S4s4) in the
combination switch.
The pump pumps water from the washer water reservoir to the windshield washer.
WINDSHIELD WASHER PUMP, LOCATION/PURPOSE/DESIGN/FUNCTION - GF82.35-P-4101A
MODEL 202 as of 1.6.97, 208, 163, 210.081, 210 (except 210.2 /081) as of 1.3.97
REAR WINDOW WASHER PUMP, LOCATION - GF82.35-P-4103-01GH
Fig. 32: Identifying Washer Pump And Rear Window Washer Pump
Windshield Intermittent
Wipe - Function
GF82.30-P-3003GH
Windshield Washer
Pump
GF82.35-P-4101A
Wiper Motor
GF82.30-P-4104GH
All Activity Module
To 30.11.99
GF54.21-P-4100GH
As of 1.12.99
GF54.21-P-4100GK
Location
Models 202, 208, 210
GF82.30-P-0005-01A
Model 163
GF82.35-P-4103-01GH
Purpose
Pumping water for
washing windshield
Design
The windshield washer
pump is driven by a DC
motor
Function
Models 202, 208, 210
GF82.35-P-4101-01A
Model 163
GF82.35-P-4101-01GH
2001 Mercedes-Benz ML320
1998-2005 ACCESSORIES & BODY, CAB Electrical System - Body - 163 Chassis
me
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст