Mercedes-Benz ML320. Manual — part 734
Fig. 45: Identifying Rear Beverage Holder Components
REMOVE/INSTALL REAR ASHTRAY - AR68.20-P-2230GH
MODEL 163.113 /154 /174 #A as of 289565,163.113 #X as of 754620,163.128 /157 /175
Remove/install
1
Remove rear center console (1)
AR68.20-P-
2020GI
2
Separate air nozzle (2) from
beverage holder (3)
Loosen ball joint (4) from bottom of
beverage holder.
3
Unscrew bolts (5) from sides of
beverage holder
4
Remove beverage holder (3)
Press onto paneling (6).
5
Install in the reverse order
2001 Mercedes-Benz ML320
1998-2005 ACCESSORIES & BODY, CAB Interior Equipment - 163 Chassis
me
Fig. 46: Identifying Rear Ashtray Components
REMOVING AND INSTALLING COVER AT GEARSHIFT LEVER - AR68.20-P-2310GH
MODEL 163.113 /136 /154 /172 /174 up to 31.8.01
Remove/install
1
Remove rear center console (1)
AR68.20-P-2020GI
2
Remove locking pin (2) from ashtray hinge
3
Remove ashtray (3)
4
Install in the reverse order
2001 Mercedes-Benz ML320
1998-2005 ACCESSORIES & BODY, CAB Interior Equipment - 163 Chassis
me
Fig. 47: Identifying Gearshift Lever Cover Components
Remove/install
1
Remove plastic frame (1) upward
Fig.
6
2
Remove covering in stowage compartment (2)
Fastened with pin.
3
Remove center console insert (3)
Remove screws (2 each)
from insert floor
4
Press cover (4) out of catch in center console at rear and
sides with long wedge
Fig.
6
5
Disconnect connectors (5) from center console switch
group (S21)
6
Install in the reverse order
2001 Mercedes-Benz ML320
1998-2005 ACCESSORIES & BODY, CAB Interior Equipment - 163 Chassis
me
Fig. 48: Identifying Long Wedge (115 589 03 59 00)
REMOVE/INSTALL COVER ON GEARSHIFT LEVER - AR68.20-P-2310GI
MODEL 163.113 /154 /174 #A as of 289565,163.113 #X as of 754620,163.128 /157 /175
Fig. 49: Identifying Cover On Gearshift Lever
Remove/install
1
Remove armrest lid (1)
AR68.20-P-
2370GH
2
Remove plastic screws (5)
3
Remove stowage box (2)
Press the pin in the center of the rivet
downwards for about 4 mm; then remove the
rivet from above.
4
Remove selector lever paneling
Long wedge
Fig. 6
5
Unscrew bolts (3)
6
Remove cover (4) from above
Carefully prize open at front (arrows) and at
the sides.
Long wedge
Fig. 6
7
Detach connector from lower
control panel control module
3 connector.
8
Install in the reverse order
2001 Mercedes-Benz ML320
1998-2005 ACCESSORIES & BODY, CAB Interior Equipment - 163 Chassis
me
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст