Mercedes-Benz ML320. Manual — part 586
3. Press tabs of retainer (4) out of detent.
4. Open retainer (4).
Shown on 4-pin JPT, MPT coupling
Fig. 507: Identifying Retaining Cap, Coupling Housing And Retainer - Shown On 4-Pin JPT, MPT
Coupling
Unpin female contacts from coupling (JPT)
1. Insert blade holder with clamping pliers
with JPT/SPT blade
or MCP 2.8/Fl. 2.8/JPT/SPT blade
from the front through the openings in contact cavity of coupling.
This presses together the springs of the female contact (1).
2. A slight tug on the corresponding cable will remove the female contact (1) from the coupling.
2004 Mercedes-Benz ML350
1998-2005 GENINFO Overall vehicle - 163 Chassis
me
Fig. 508: Female Contacts From Coupling (JPT)
REMOVE CONTACTS FROM JUNIOR POWER TIMER PLUG - AR00.19-P-0120-08A
Fig. 509: Identifying New Passenger Vehicle Wiring Harness Repair Kit (220 589 04 99 00)
2004 Mercedes-Benz ML350
1998-2005 GENINFO Overall vehicle - 163 Chassis
me
Fig. 510: Identifying Wiring Harness Repair Kit, Basic (000 589 13 99 00)
Fig. 511: Identifying Wiring Harness Repair Kit (220 589 02 99 00)
Fig. 512: Identifying Blade Holder With Clamping Pliers (220 589 01 99 50)
2004 Mercedes-Benz ML350
1998-2005 GENINFO Overall vehicle - 163 Chassis
me
Fig. 513: Identifying JPT /SPT Blade (220 589 01 99 61)
Fig. 514: Identifying MCP 2.8 / Fl Blade. 2.8 / JPT / SPT (000 589 13 99 30)
Secondary unlocking for version with locking bar (JPT)
1. Using a suitable tool, move locking bar (1) in direction of arrow out of locked position.
Shown on 4-pin JPT plug
2004 Mercedes-Benz ML350
1998-2005 GENINFO Overall vehicle - 163 Chassis
me
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст