Mercedes-Benz ML320. Manual — part 472
BT27.50-P-0011-01A
Friction bearing in sun wheel of rear planet
gear set converted to anti-friction bearing
Transmission 722.6
k
TRANSMISSION 722.60# /61# /660 /662 /664 /665 /69# ## as of 1572721 as of 1.6.99,
722.62# /63# /650 /654 /661 /663 /666 /669 ## as of 1574575 as of 2.6.99
P27.50-2046-11
1
Anti-friction bearing
45d Freewheel
45e Sun gear with inner plate carrier K3, rear planet set
The friction bearing bush in the sun gear (45e) has been replaced
with an anti-friction bearing (1).
This improves the bearing of the hollow shaft and the freewheel (45d)
is no longer worn away by the friction bearing bush.
Copyright DaimlerChrysler AG 28.05.2006 CD-Ausgabe G/10/04 . This WIS print-out will not be recorded by Modification services.
Page 1
1998-2005 DRIVELINE/AXLES
Front Axle - 163 Chassis
TESTING & REPAIR
TESTING AND REPAIR WORK: PASSENGER CARS: FRONT AXLE - AR33.00-Z-9163AA
MODEL 163
ATTACH ENGINE SUPPORT BRACKET AND RAISE ENGINE - AR33.10-P-0100-01BV
Workshop equipment
Removing and installing front axle
MODELS
163.113 /128 /136 /154 /157 /172 /174 /175
AR33.10-P-
0100GH
Remove/install rubber bushes of front
axle transmission mounting
MODEL
163.113 /128 /136 /154 /157 /172 /174 /175
AR33.10-P-
0120GH
Remove/install front axle half
MODEL
163.113 /128 /136 /154 /157 /172 /174 /175
AR33.10-P-
0200GH
Remove/install front axle shaft flange
and double-row angular ball bearing
MODEL
163.113 /128 /136 /154 /157 /172 /174 /175
AR33.20-P-
0315GH
Checking follower joint of steering
knuckle mount (installed)
MODEL
163.113 /128 /136 /154 /157 /172 /174 /175
AR33.20-P-
0426GH
Replace supporting joint
MODEL
163.113 /128 /136 /154 /157 /172 /174 /175
AR33.20-P-
0440GH
Removing and installing upper
wishbone
MODEL
163.113 /128 /136 /154 /157 /172 /174 /175
AR33.20-P-
0500GH
Remove/install lower wishbone
MODEL
163.113 /128 /136 /154 /157 /172 /174 /175
AR33.20-P-
0510GH
Replace front bearing of lower
wishbone
MODEL
163.113 /128 /136 /154 /157 /172 /174 /175
AR33.20-P-
0526GH
Removing and installing steering
knuckle
MODEL
163.113 /128 /136 /154 /157 /172 /174 /175
AR33.25-P-
0400GH
Remove/install front axle gear
MODEL
163.113 /128 /136 /154 /157 /172 /174 /175
AR33.30-P-
0525GH
Replace shaft seal on drive pinion
MODEL
163.113 /128 /136 /154 /157 /172 /174 /175
AR33.30-P-
0530GH
Remove/install radial shaft seal at front
axle gear of front axle shaft
MODEL
163.113 /128 /136 /154 /157 /172 /174 /175
AR33.30-P-
0545GH
Remove/install front axle shafts
MODEL
163.113 /128 /136 /154 /157 /172 /174 /175
AR33.30-P-
0620GH
Replace rubber boots on front axle shaft
MODEL
163.113 /128 /136 /154 /157 /172 /174 /175
AR33.30-P-
0660GH
WE58.40-Z-1007-11A
Engine lifting fixture
2001 Mercedes-Benz ML320
1998-2005 DRIVELINE/AXLES Front Axle - 163 Chassis
2001 Mercedes-Benz ML320
1998-2005 DRIVELINE/AXLES Front Axle - 163 Chassis
me
me
The engine support bracket (1) is positioned with its support surfaces resting on the left and right-side
fenders' inside seams (arrows).
During installation it is important to proceed with caution to avoid damage to the vehicle paintwork.
1. Lift engine by the front suspension hook.
Shown on model 163 with engine 112.942
Fig. 1: Identifying Engine Support Bracket - Shown On Model 163 With Engine 112.942
SUPPORTING FRONT AXLE CARRIER WITH INSPECTION PIT OR ASSEMBLY LIFT - AR33.10-P-0100-03GH
Workshop equipment
1. Support front axle with axle removal device (070) and inspection pit or assembly lift. Ensure that the
guide pin (arrow) is inserted in the front axle carrier.
Lower the front axle carefully; ensure that no cables and lines are trapped in between.
WE58.40-Z-1019-11A
Removal fixture for axles
2001 Mercedes-Benz ML320
1998-2005 DRIVELINE/AXLES Front Axle - 163 Chassis
me
Fig. 2: Identifying Supporting Front Axle And Pin
REMOVING AND INSTALLING FRONT AXLE - AR33.10-P-0100GH
MODELS 163.113 /128 /136 /154 /157 /172 /174 /175
2001 Mercedes-Benz ML320
1998-2005 DRIVELINE/AXLES Front Axle - 163 Chassis
me
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст