Mercedes-Benz ML320. Manual — part 285
Fig. 177: Identifying Wiper Arm Components
Windshield wipers
REMOVE/INSTALL WIPER SYSTEM - AR82.30-P-6400GH
MODEL 163.113 /128 /136 /154 /157 /172 /174 /175
Remove/install
Injury hazard by
trapping or crushing, in
extreme cases with loss of
limbs when reaching into
windshield wiper
mechanism
Always remove ignition
key when working on
windshield wiper
mechanism.
AS82.30-Z-0001-01A
1
Ensure that wiper motor is
in park position
2
Open protective cap (1)
3
Unscrew nut (2)
*BA82.30-P-1002-01C
4
Takeoff wiper arm
Hold wiper arm on
mounting section to
avoid hitting against
windshield.
5
Install in the reverse order
Number
Designation
Model Series 163
BA82.30-P-1002-01C
Nut for wiper arm on
windshield
Nm 18
2001 Mercedes-Benz ML320
1998-2005 ACCESSORIES & BODY, CAB Electrical System - Body - 163 Chassis
me
Fig. 178: Identifying Wiper System Components
MOVE WIPER MOTOR TO PARKING POSITION - AR82.30-P-6800-01E
Remove/install
Injury hazard by
trapping or crushing, in
extreme cases with loss of
limbs when reaching into
windshield wiper
mechanism
Always remove ignition
key when working on
windshield wiper
mechanism.
AS82.30-Z-0001-01A
1
Ensure that wiper motor is
in park position
2
Remove cover on air
intake
AR83.25-P-1405GH
3
Unscrew nuts(1) on wiper
arm
4
Lift wiper system (2)
5
Disconnect connector (3)
from the wiper motor
(M6/1)
6
Remove wiper system (2)
7
Install in the reverse order
2001 Mercedes-Benz ML320
1998-2005 ACCESSORIES & BODY, CAB Electrical System - Body - 163 Chassis
me
Illustrated on model 163
Fig. 179: Identifying Wiper Motor Connector And Wiper Motor
Fig. 180: Identifying Wiper Motor Connector
Fig. 181: Identifying Wiper Motor
1. Connect wiper motor (M6/1) to wiper motor connector (1).
2. Hold wiper motor (M6/1) using the left hand.
3. Switch on ignition.
4. Set combination switch to "stage 1".
5. Turn combination switch back to "level 0".
2001 Mercedes-Benz ML320
1998-2005 ACCESSORIES & BODY, CAB Electrical System - Body - 163 Chassis
me
6. If the wiper motor (M6/1) is in the park position, switch off the ignition.
7. Detach wiper motor connector (1) from wiper motor (M6/1).
REMOVING AND INSTALLING WIPER MOTOR - AR82.30-P-6800GH
MODEL 163
Fig. 182: Identifying Wiper Motor Components
Removal, installation
Injury hazard from
pinching and crushing, in
extreme cases extremities
can even be cut off when
caught in windshield
wiper mechanism.
Always remove ignition
key before working on
windshield wiper
mechanism.
AS82.30-Z-0001-01A
1
Remove cover on air
intake
AR83.25-P-1405GH
2
Remove wiper system
AR82.30-P-6400GH
3
Unscrew nut on wiper
motor shaft (1)
Installation: Align
lever on wiper motor
shaft vertically
downward.
4
Unscrew screws (3) on
2001 Mercedes-Benz ML320
1998-2005 ACCESSORIES & BODY, CAB Electrical System - Body - 163 Chassis
me
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст