Mercedes-Benz ML320. Manual — part 345
AR68.20-P-2310GI
Remove/install cover on gearshift lever
26.2.01
MODEL
163.113 /154 /174 #A as of 289565,
163.113 #X as of 754620,
163.128 /157 /175
P68.20-2545-01
1
Armrest cover
2
Stowage box
3
Bolts
4
Cover on shift lever
5
Plastic screws
P68.20-2456-01
Remove/install
1
Remove armrest lid (1)
AR68.20-P-2370GH
2
Remove plastic screws (5)
3
Remove stowage box (2)
Press the pin in the center of the rivet
downwards for about 4 mm; then remove the
rivet from above.
4
Remove selector lever paneling
Long wedge
*115589035900
5
Unscrew bolts (3)
6
Remove cover (4) from above
Carefully prize open at front (arrows) and
at the sides.
Long wedge
*115589035900
7
Detach connector from lower control panel
control module
3 connector.
8
Install in the reverse order
Assembly wedge
115 589 03 59 00
Copyright DaimlerChrysler AG 09.05.2006 CD-Ausgabe G/10/04 . This WIS print-out will not be recorded by Modification services.
Page 1
AR83.10-P-4800GH
Removing and installing rear air nozzle
30.5.01
MODEL
163.113 /154 /174 #A as of 289565,
163.113 #X as of 754620,
163.128 /157 /175
P68.20-2494-11
1
Rear center console.
2
Retaining clips
3
Air nozzle
Remove/install
1
Remove rear center console (1)
AR68.20-P-2020GI
2
Loosen retaining clamps (2) on the sides of
the air nozzle (3)
3
Remove air nozzle (3) from the rear center
console
4
Install in the reverse order
Copyright DaimlerChrysler AG 09.05.2006 CD-Ausgabe G/10/04 . This WIS print-out will not be recorded by Modification services.
Page 1
AR68.20-P-2230GH
Remove/install rear ashtray
9.5.01
MODEL
163.113 /154 /174 #A as of 289565,
163.113 #X as of 754620,
163.128 /157 /175
P68.20-2498-11
1
Rear center console.
2
Locking pin
3
Ashtray
Remove/install
1
Remove rear center console (1)
AR68.20-P-2020GI
2
Remove locking pin (2) from ashtray hinge
3
Remove ashtray (3)
4
Install in the reverse order
Copyright DaimlerChrysler AG 10.05.2006 CD-Ausgabe G/10/04 . This WIS print-out will not be recorded by Modification services.
Page 1
AR68.20-P-2220GI
Remove/install rear beverage holder
9.5.01
MODEL
163.113 /154 /174 #A as of 289565,
163.113 #X as of 754620,
163.128 /157 /175
P68.20-2497-11
1
Rear center console.
2
Air nozzle
3
Beverage holder
4
Ball joint
5
Bolts
6
Paneling
Remove/install
1
Remove rear center console (1)
AR68.20-P-2020GI
2
Separate air nozzle (2) from beverage holder
(3)
Loosen ball joint (4) from bottom of
beverage holder.
3
Unscrew bolts (5) from sides of beverage
holder
4
Remove beverage holder (3)
Press onto paneling (6).
5
Install in the reverse order
Copyright DaimlerChrysler AG 09.05.2006 CD-Ausgabe G/10/04 . This WIS print-out will not be recorded by Modification services.
Page 1
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст