Mercedes-Benz ML320. Manual — part 337
AR88.30-P-2000-01GH
Remove brush guard
Modification notes
10.8.01
Value modified from 25 Nm to 49 Nm
Value modified in BA88.30-P-1003-01A for
model 163 up to 31.8.01
*BA88.30-P-1003-01A
Detachable body components, underride guard
Number
Designation
Model 163
up to
31.8.01
BA88.30-P-1002-01A
Nut, spacer tube on brush guard
Nm
86
BA88.30-P-1003-01A
Screw, mount on brush guard
Nm
49
BA88.30-P-1011-01A
Bolt, underride guard to brush guard
Nm
25
BA88.30-P-1015-01A
Nut, underride guard to bracket
Nm
49
BA88.30-P-1016-01A
Bolt, front section of underride guard to rear
section of underride guard
Nm
49
P88.30-2150-06
1.1
Remove screws (1) and nuts (2) from
underride guard (3) at bottom of vehicle
.
Only if available.
2
Remove screw for brush guard (4) from
inner mount at bottom (5)
3
Remove nut for spacer tube (6)
4
Remove spacer sleeve (7) from spacer
tube nut (6).
5
Remove brush guard (8) toward front.
Carefully move out brush guard so that
paint is not damaged.
Copyright DaimlerChrysler AG 20.05.2006 CD-Ausgabe G/10/04 . This WIS print-out will not be recorded by Modification services.
Page 1
AR88.20-P-2000GH
Remove/install front bumper
14.3.97
MODEL
163.113 /154 #A up to 289564,
163.113 #X up to 754619,
163.154 #X up to 716524,
163.136 /172 except CODE (U49) Styling package
P88.20-0375-09
1
Nut
2
Nuts
1a
Screw
Remove/Install
1.1
Remove brush guard together with underride
guard
If installed.
AR88.30-P-2000-01GH
*BA88.30-P-1002-01A
*BA88.30-P-1003-01A
*BA88.30-P-1011-01A
*BA88.30-P-1015-01A
*BA88.30-P-1016-01A
2
Unscrew nut (1)
Left and right at inside.
*BA88.20-P-1001-01B
3
Unscrew bolt (1a)
Left and right at inside.
*BA88.20-P-1002-01B
4
Remove front bumper grille.
Carefully remove front bumper grille so
that bumper grille and bumper grille mount
cannot be damaged.
Loosen retainers and pull to outside
Pulling hook
*140589023300
5.1
Remove outside temperature sensor from
front bumper.
If installed.
6
Unscrew nuts (2)
*BA88.20-P-1003-01B
7
Remove bumper toward front.
Do not damage paint.
8
Install in the reverse order
Detachable body components, underride guard
Number
Designation
Model 163
up to
31.8.01
BA88.30-P-1002-01A
Nut, spacer tube on brush guard
Nm
86
Copyright DaimlerChrysler AG 17.05.2006 CD-Ausgabe G/10/04 . This WIS print-out will not be recorded by Modification services.
Page 1
BA88.30-P-1003-01A
Screw, mount on brush guard
Nm
49
BA88.30-P-1011-01A
Bolt, underride guard to brush guard
Nm
25
BA88.30-P-1015-01A
Nut, underride guard to bracket
Nm
49
BA88.30-P-1016-01A
Bolt, front section of underride guard to rear
section of underride guard
Nm
49
Bumper
Number
Designation
Model 163
BA88.20-P-1001-01B
Nut, front bumper on outer mount
Nm
8
BA88.20-P-1002-01B
Screw for front bumper on inner mount
Nm
1.5
BA88.20-P-1003-01B
Nut, front bumper on frame
Nm
8
Pulling hook
140 589 02 33 00
Copyright DaimlerChrysler AG 17.05.2006 CD-Ausgabe G/10/04 . This WIS print-out will not be recorded by Modification services.
Page 2
AR88.20-P-2200GH
Remove/install rear bumper
6.4.99
MODEL
163.113 #A up to 289564,
163.154 #X up to 754619,
163.154 #A up to 289564,
163.136 /172
P88.20-0372-09
A
Covers
C
Screws
B
Nuts
Remove/install
1.1
Disconnect antenna connector of E-call
emergency call system
Only with emergency call system E-Call,
code 349.
Connector is located behind side flap of right
C-pillar paneling at jack mounting point.
2
Remove covers (A)
Do not damage paint. Do not break off
clips.
Installation wedge
*115589035900
3
Unscrew mounting nuts (B) from bumper
*BA88.20-P-1004-01B
4
Unscrew screws (C)
*BA88.20-P-1005-01B
5.1
Remove nut from rear mud guard
Only if present
*BA88.30-P-1004-01A
6
Remove bumper toward rear
Do not damage paint.
Installation: Align bumper at tailgate and
at taillamps
7.1
Remove rubber seal for E-call emergency call
system antenna from body at right
Only with emergency call system E-Call,
code 349.
8
Install in the reverse order
Bumper
Number
Designation
Model 163
BA88.20-P-1004-01B
Nut, rear bumper to frame
Nm
8
BA88.20-P-1005-01B
Screws, rear bumper on frame
Nm
8
Detachable body components, underride guard
Copyright DaimlerChrysler AG 20.05.2006 CD-Ausgabe G/10/04 . This WIS print-out will not be recorded by Modification services.
Page 1
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст