Mercedes-Benz ML320. Manual — part 666
The fresh air/recirculated air flap shuts off the supply of recirculated air.
Fresh air is drawn in.
Recirculation mode
The fresh air/recirculated air flap shuts off the supply of fresh air. Air is drawn in from the passenger
compartment.
HEATER CORE, LOCATION/PURPOSE/FUNCTION - GF83.20-P-2108GC
MODEL 163, 168
HEATING WATER CIRCULATION PUMP, LOCATION/TASK/FUNCTION - GF83.20-P-2109GI
MODEL 163 as of 1.9.01 with code (580a) Automatic air conditioning
Fig. 41: Identifying Heating Water Circulation Pump
Heater core,
location
Model 168
GF83.20-P-
2101-02GC
Model 163
GF83.20-P-
2101-02GH
Heater core,
purpose
The heater core serves for heating up the air flowing through on the way
to the various defroster, ventilation and heating nozzles in the vehicle
passenger compartment.
Heater core,
function
GF83.20-P-
2101-01GC
Heating water
circulation pump,
position
The heating water circulation pump (M13) is located at the front
right in the engine compartment next to the coolant compensating
reservoir.
Heating water
circulation pump
task
The heating water circulation pump (M13) serves to maintain a
constant flow of hot water through the heat exchanger in the event of
low engine speeds and residual engine heat utilization.
2001 Mercedes-Benz ML320
1998-2005 HVAC Climate Control - 163 Chassis
me
HEATER HOUSING POSITION/TASK/FUNCTION - GF83.20-P-2110GC
MODEL 163 up to 31.8.01
168 up to except CODE (580) Air conditioning or Tempmatic for USA
Shown on model 168 as of 1.03.01
Fig. 42: Identifying Heater Housing - Shown On Model 168 As Of 1.03.01
FRESH AIR/RECIRCULATED AIR FLAP, LOCATION/PURPOSE/FUNCTION - GF83.20-P-2111GC
MODEL 163, 168
Heating water
circulation pump
function
GF83.20-P-
2102-01GI
Heater housing
position
The heater housing (1) is located beneath the instrument
panel.
Model 168 up to 28.02.01
GF83.20-P-2103-
01GC
Model 163
GF83.20-P-2103-
01GH
Heater housing task
GF83.20-P-2103-
03GC
Heater housing
function
Model 168
GF83.20-P-2103-
02GC
Model 163
GF83.20-P-2103-
02GH
2001 Mercedes-Benz ML320
1998-2005 HVAC Climate Control - 163 Chassis
me
BLOWER SWITCH, LOCATION - GF83.25-P-2100-01GH
Heater depiction
The blower switch (1) is located in the heater control unit.
Fig. 43: Identifying Blower Switch On Heater Control Unit
BLOWER SWITCH, FUNCTION - GF83.25-P-2100-02GC
Function
Depending on the setting of the blower switch, the current is guided via sliding contacts onto a contact plate,
and from there to the relevant series resistor assembly resistor for the set blower level.
On actuation of the starter, the control voltage for the blower (M2) is switched off at the control unit via
terminal 15x.
Model 168 as of 1.03.01
Blower level 4 is implemented by bridging two contact decks.
As a result of the design of the contact plate, the re-activation of
blower level 1 --> blower level 2 and
Fresh air/recirculated air
flap, location
Model 168
GF83.20-P-2104-
01GC
Model 163
GF83.20-P-
2104-01GH
Fresh air/recirculated air
flap, purpose
The fresh air/recirculated air flap switches the system
over from fresh air to recirculated air.
Fresh air/recirculated air
flap, function
Model 168
GF83.20-P-2104-
02GC
Model 163
GF83.20-P-
2104-02GH
2001 Mercedes-Benz ML320
1998-2005 HVAC Climate Control - 163 Chassis
me
blower level 2 --> blower level 3
may lead to an increase in the speed of the blower motor due to the short-term bridging of two contact plates
(intermediate setting).
BLOWER SWITCH, LOCATION/TASK/DESIGN/FUNCTION - GF83.25-P-2100GC
MODEL 163 up to 31.8.01 168
Shown on model 168 with heating as of 01.03.01
Fig. 44: Identifying Blower Switch (Model 168 With Heating As Of 01.03.01)
BLOWER SWITCH, LOCATION/TASK/DESIGN/FUNCTION - GF83.25-P-2100GI
MODEL 163 as of 1.9.01 with code (580a) Automatic air conditioning
Blower switch,
location
The blower switch (N119s3) is located on the left in the heater
push-button control module.
Model 168 up to 28.02.01
GF83.25-P-2100-
01GC
Model 163
GF83.25-P-2100-
01GH
Blower switch,
task
The blower switch activates several blower stages in fresh air
and recirculating air mode.
Blower switch
design
The blower switch is designed as a multi-level rotary switch with
an axis and wiper contact.
Blower switch,
function
GF83.25-P-2100-
02GC
2001 Mercedes-Benz ML320
1998-2005 HVAC Climate Control - 163 Chassis
me
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст