Mercedes-Benz ML320. Manual — part 330
RETROFIT WIRING HARNESS OF HANDS-FREE SYSTEM - AZ82.70-P-0005-02GH
1. Expose connector for telephone handset (A34) in radio shaft.
Fig. 402: Identifying Telephone Handset Connector (A34)
2. Connect connector (8) to interface (4).
3. Connect antenna for telephone handset (A34).
4. Connect connection line (5) to interface (4).
B6 788 0388
FA console RHS (java)
1
A005 997 9390
Tie strap
5
B6 682 8607
Wiring harness (tel. on radio)
1
B6 682 8608
CTEL antenna
1
B6 682 8609
Cover (with microphone), color:
java (as of 01/01)
1
B6 682 8610
Cover (without microphone)
color: light gray (as of 01/01)
1
B6 682 8611
Active microphone in design
function housing (up to 12/00)
1
2001 Mercedes-Benz ML320
1998-2005 ACCESSORIES & BODY, CAB Electrical System - Body - 163 Chassis
me
Fig. 403: Identifying Connector, Connection Line & Interface
5. Apply special glue to rear of microphone (arrow) and glue hands-free system microphone (B25) included
in installation kit to headliner.
Align microphone so that pickup opening points towards driver.
Fig. 404: Locating Rear Of Microphone & Hands-Free System Microphone (B25)
6. Glue microphone lead behind headliner as shown in figure and along right A-pillar below instrument
panel to radio shaft.
7. Connect all control and operation modules and connect battery for checking proper function of telephone.
Avoid error messages from unconnected control modules.
2001 Mercedes-Benz ML320
1998-2005 ACCESSORIES & BODY, CAB Electrical System - Body - 163 Chassis
me
Fig. 405: Locating Microphone Lead Behind Headliner
8. Insert test telephone in portable cellular telephone holder and set microphone sensitivity with "Micro"
adjustment screw (arrow) on interface box (4).
Adjust so that feedback and whistling are not audible and the volume is optimum for speaking and
listening.
9. Disconnect battery again.
Fig. 406: Identifying Microphone Sensitivity Adjustment Screw & Interface Box
10. Fasten interface box (4) and connection leads at rear in radio shaft as shown in figure with double-sided
adhesive tape.
2001 Mercedes-Benz ML320
1998-2005 ACCESSORIES & BODY, CAB Electrical System - Body - 163 Chassis
me
Fig. 407: Identifying Interface Box
RETROFITTING HANDS-FREE SYSTEM - AZ82.70-P-0005GH
MODEL 163 as of 1.10.99
for Mercedes-Benz FSE hands-free system
Fig. 408: Identifying Hands-Free System Components
Removal
1
Connect quiescent current
retention unit
*WH58.30-Z-1012-09A
Risk of explosion from
No fire, sparks, naked
AS54.10-Z-0001-01A
2001 Mercedes-Benz ML320
1998-2005 ACCESSORIES & BODY, CAB Electrical System - Body - 163 Chassis
me
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст