Mercedes-Benz Sprinter / Dodge Sprinter. Manual — part 185
(5) Remove lower differential side gear (1) and
shim (Fig. 37).
DISASSEMBLY - DUAL REAR WHEEL
(1) Remove differential cover bolts and remove
cover (Fig. 38).
(2) Remove upper differential side gear (1) and
shim (2) (Fig. 39).
(3) Remove differential cross shaft (1) with pinion
gears (2) and spherical washers (3) (Fig. 40).
Fig. 37 LOWER SIDE GEAR
1 - SIDE GEAR
2 - DIFFERENTIAL CASE
Fig. 38 DIFFERENTIAL COVER
1 - BOLTS
2 - COVER
Fig. 39 UPPER SIDE GEAR
1 - SIDE GEAR
2 - SHIM
Fig. 40 DIFFERENTIAL PINIONS
1 - CROSS SHAFT
2 - PINION GEAR
3 - WASHER
VA
REAR AXLE
3 - 33
(4) Remove lower differential side gear (1) and
shim (Fig. 41).
ASSEMBLY
ASSEMBLY - SINGLE REAR WHEEL
(1) Install lower differential side gear (1) and shim
(Fig. 42).
(2) Install first differential pinions gears (1) with
spherical washers and mate shaft (2) (Fig. 43).
(3) Install second pinion gears (2) with spherical
washers and mate shaft (1) (Fig. 44).
Fig. 41 LOWER SIDE GEAR
1 - SIDE GEAR
2 - DIFFERENTIAL CASE
Fig. 42 LOWER SIDE GEAR
1 - SIDE GEAR
2 - DIFFERENTIAL CASE
Fig. 43 PINION GEAR SET
1 - MATE SHAFT
2 - PINION GEARS
Fig. 44 PINION GEARS
1 - PINION GEARS
2 - MATE SHAFT
3 - 34
REAR AXLE
VA
(4) Install upper differential side gear (1) and shim
(2) (Fig. 45).
(5) Install differential cover with location numbers
(1) on differential case (2) aligned (Fig. 46).
(6) Install differential cover (2) bolts (1) and
tighten to 45 N·m (33 ft. lbs.) (Fig. 47).
(7) Check torque to rotate the differential gears
with Torque Tool 9744 and a torque wrench. Torque
should be 20-40 N·m (15-30 ft. lbs.).
NOTE: Shims are available in 0.05 mm (0.002 in.)
increments, in thicknesses from 1.30 - 2.00 mm
(0.051 - 0.078 in.).
Fig. 45 UPPER SIDE GEAR
1 - SIDE GEAR
2 - SHIM
Fig. 46 LOCATION NUMBERS
1 - NUMBERS
2 - CASE
Fig. 47 DIFFERENTIAL COVER
1 - BOLTS
2 - COVER
VA
REAR AXLE
3 - 35
ASSEMBLY - DUAL REAR WHEEL
(1) Install lower differential side gear (1) and shim
(Fig. 48).
(2) Install first differential pinions gears (2) with
spherical washers (3) and cross shaft (1) (Fig. 49).
(3) Install upper differential side gear (1) and shim
(2) (Fig. 50).
(4) Install differential cover with location numbers
(1) on differential case (2) aligned (Fig. 51).
Fig. 48 LOWER SIDE GEAR
1 - SIDE GEAR
2 - DIFFERENTIAL CASE
Fig. 49 DIFFERENTIAL PINIONS
1 - CROSS SHAFT
2 - PINION GEAR
3 - WASHER
Fig. 50 UPPER SIDE GEAR
1 - SIDE GEAR
2 - SHIM
Fig. 51 LOCATION NUMBERS
1 - NUMBERS
2 - CASE
3 - 36
REAR AXLE
VA
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст