Great Wall service chassis and body Manual — part 110
B0-64
Spoiler (
)
Element figure
Vehicle Body
Spoiler
Spoiler disassembly
1.
Tear down the highly-mounted stop-grade lamp;
(a)
Tear down the two screws and disconnect the wire harness
from lamp.
(b)
Tear down the highly-mounted stop lamp from the spoiler.
2.
Tear down the spoiler assembly
(a)
Tear down the rear beam trim panel from the inside of body.
(b)
Tear down the four nuts and disconnect the wire harness
from the spoiler;
(c)
Tear down the spoiler assembly and spoiler gasket from the
outside.
SJ
(a)
Open the two covers of round hole at the top-grade of
spoiler;
(b)
Tear down the two bolts and disconnect the wire harness
from the spoiler.
(c)
Tear down the spoiler assembly and spoiler gasket from the
outside.
Mount of Spoiler
Mount the spoiler in the reverse approach.
SY SJ
spoiler gasket
nut
highly mounted
stop lamp
spoiler
assembly
B0-65
Luggage rack
Element figure
Vehicle Body
Luggage Rack
bracket fastening
button
main sill
SF SY
antiskid strip
beam
blanking plug of
main sill
adjusting button of antiskid strip
fixed bracket
mounting plate of outer
luggage rack
adhesive strip of mounting plate
luggage rack assembly
SJ
B0-66
Body
Reserve Tire Bracket
Reserve tire bracket (
)
Element figure
reserve tire holder
buffer block bracket
buffer block
lock clip bracket
assembly
return spring
reserve tire bracket
adjusting arm
reserve tire lock
90
SY
specified torque
reserve tire bracket
reserve tire holder
reserve tire lock
lock clip bracket assembly
adjusting arm
SJ
90
K
N
m
B0-67
Vehicle Body
Reserve Tire Bracket
Reserve tire bracket (
)
Element figure
buffer block
springy welt
trim cover of fixed bracket
decorative cover of screw hole
reserve tire bracket
nut
SF
Dismantle of reserve tire bracket
1.
Tear down the trim cover of fixed bracket;
Tear down the decorative cover of screw hole, and then tear down the
trim cover of fixed bracket.
Tear down the adjusting arm (SY SJ)
Tear down the two bolts to take down the adjusting arm;
2.
Tear down the reserve tire bracket;
Tear down the three bolts and take down the reserve tire bracket. (SF)
Tear down the three bolts and take down the reserve tire bracket. (SY
SJ)
Mount of reserve tire bracket
1.
Mount the reserve tire bracket;
(a)
Stick the springy welt on the corresponding face where the
reserve tire bracket contact with the body; (SF)
(b)
Fix the reserve tire bracket on the body with eight bolts (SF).
Fix the reserve tire bracket with three bolts on the right mail sill
and tail beam of the body.
2.
Mount the trim cover of fixed bracket;
Mount the trim cover of fixed bracket and the decorative cover of
screw hole.
Mount the adjusting arm (SY SJ)
Fix the adjusting arm on the tail beam bracket of the body by screwing
the two bolts in the fixing hole.
Notice: the paint layer should be well protected during
disassembling and assembling.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст