Great Wall service chassis and body Manual — part 98
B0-16
(SJ)
(a)
Tear down the four fixing bolts of elevator bracket;
(b)
Tear down fixing bolts of three elevators;
(c)
Disassemble the elevator through the auxiliary hole.
Vehicle Body
Rear Door
11. Tear down the lock ring inside the vehicle;
Disconnect the connecting bar to tear down the lock ring inside
vehicle body.
12. Tear down door lock and the outdoor handle with lock
barrel:
(a)
Disconnect the outdoor with lock barrel from the con-
necting bar.
(b)
Tear down three screws and door lock.
(c)
Tear down the two bolts and the outdoor handle with lock
barrel.
(d)
Tear down the spring snapping ring and lock barrel.
Change of Glass
(Dr SF)
1.
Tear down the glass bracket with screwdriver or similar
tool.
2.
Coat the black glue on the inner side of glass bracket
liner.
3.
Tap the glass bracket with rubber hammer to encase it.
Tear down the bolts on gear panel with the pliers or similar
tool.
4.
Tear down the bolts of door window glass bracket to take the
glass out.
SJ
a
Dr
a:35mm
b
b:80mm(manual)
65mm(electric)
SF
B0-17
Assembly of rear door
1.
Coat the MP lubricant on the parts before mounting
(a)
Coat the MP lubricant on the sliding face and gear of
glass elevator;
Notice: Do not coat the MP lubricant on the spring of
glass elevator.
(b)
Coat the MP lubricant on the sliding face of door lock.
Vehicle Body
Rear Door
2.
Mount the outdoor handle with lock barrel and door lock:
(a)
Mount the lock barrel on the outdoor handle with spring
snapping ring.
(b)
Mount the outdoor handle and the lock barrel with two
bolts;
(c)
Mount the lock door with three screws; and
(d)
Connect the connecting bar to the outdoor handle.
3.
Mount the inside lock ring
Mount the inside lock ring and connect the connecting bar.
4. Mount the glass elevator:
(a)
Put in the elevator through the auxiliary hole;
(b)
Mount three fixing bolts of elevator (for manually-
operated elevator);
Mount four fixing bolts of elevator (for electric elevator)
(c)
Mount the small sliding track and tighten the fixing bolts
temporarily;
(SJ)
(a)
Put in the elevator through the auxiliary hole;
(b)
Mount three fixing bolts of elevator;
(c)
Mount four fixing bolts of elevator bracket.
SJ
SJ
B0-18
10. Adjust the door window glass
Vehicle Body
Rear Door
Adjust the balance arm upwardly or downwardly until the
dimensions A and B shown in the drawing are equal, and then
fix the balance arm.
11. Mount the outerauchi
8.
Mount lower rear glass guide track (Dr SF)
Mount the bolts and guide track.
9.
Mount the door window glass;
(Dr SF SL SK SY SJ)
Put the glass in the door cavity and then fix the glass on the
glass elevator with two bolts.
Mount on the tailgate baffle and lower dust strip (Dr)
5.
Mount the door glass channel;
6.
Mount on the quarter window glass (SF SJ)
7.
Mount the upper glass guide track (SF)
Mount the bolts and guide track.
12. Mount the door interior trim panel;
13. Mount the indoor handle:
(a) Push the indoor handle in the door paneling and slide it
backwardly.
(b)
Tighten the screws.
A
B
A=B
SF
SJ
B0-19
14. Mount the elevator handle (Dr)
Mount the paneling and elevator handle with spring snapping
ring as shown in the drawing under the condition that the all
of doors and windows of vehicle are closed.
Vehicle Body
Rear Door
forward
30
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст