Great Wall service chassis and body Manual — part 63
SR-3
Steering System
On-vehicle Inspection
max play
On-vehicle Inspection
Steering wheel play
1.SR-18Check to see whether the steering wheel play is
correct;
Park the vehicle stably and align the tires in correct direction,
press the steering wheel with finger and swing it in left and
right direction. The play should not exceed the max play.
(Max play)
6(Dr SF)
If the play is nor correct, adjust or repair the steering wheel as
requirement.
2.
Adjust the steering wheel play:
(a)
Align the wheel forward precisely;
(b)
Loosen the locking nuts of steering gear;
(c)
Rotate the adjusting screws of steering gear clockwise to
reduce the steering wheel play, while contrarotate the
adjusting screws to increase the steering wheel play.
Remark: screw the adjusting screws and enlarge the play a
little each time to check the adjusted play.
3.
Check to see whether there is steering inconvenience
Rotate the steering wheel by half round in right and left
direction to check whether the play is correct, and whether the
wheel runs smoothly or any seize-up in its running.
4.
Fix the adjusting screws and fasten the adjustable nut.
Oil level height
Check the oil level height in the steering gear housing.
Oil level height: flush with the filler opening.
If there oil is insufficient, add the gear oil and check to see
whether there is oil leakage.
SR-4
Steering System
Steering Column
Steering Column
Element figure of non-adjustable steering column
Dr
SL SK SY
upper part of
steering column
steering drive shaft
30
2
N
m
specified torque
steering drive shaft
upper part of steering column
50
5
universal cardan joint
dust cap
fixed support seat
SR-5
Steering Column
Element figure of adjustable steering column
Steering System
Steering Column
Dr SF
upper part of steering column
universal cardan joint
steering drive
shaft
upper part of steering column
steering drive shaft
universal cardan joint
universal cardan joint
steering column
SL SK SY
SJ
SR-6
Steering System
Steering Column
Dismantle of the steering wheel
1.
Dismantle of the steering wheel;
(a)
Take down the bugle cap;
(b)
Pull down the bugle wire.
(c)
Tear down the fixing nut of steering wheel.
2.
Tear down the combined switch cover;
3.
Tear down the cover at left bottom part.
4.
Tear down the fixing bracket for the left-bottom cover.
5.
Tear down the air passage;
6.
Tear down the combined switch;
7.
Tear down the fixed support seat bolts on front-wall panel;
8.
Tear down the fixing bolts at upper part of steering
column, and
9.
Tear down the connecting bolts of steering column
drive shaft.
10. Pull out the steering column.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст