Mazda 6. Manual — part 356
ON-BOARD DIAGNOSTIC [AUDIO]
T–171
T
Diagnostic procedure
End Of Sie
DTC 03:ER07
A6E817566900W14
Diagnostic procedure
End Of Sie
DTC 00:ER01
A6E817566900W15
Diagnostic procedure
STEP
INSPECTION
ACTION
1
VERIFY WHETHER MALFUNCTION IS IN CD
PLAYER OR CD
• Play CD and select other song (change
tracks).
• Does CD player change tracks?
Yes
Go to Step 3.
No
Not able to change particular
tracks.
Go to next step.
Not able to change any
tracks.
Change CD and perform
track-change again.
• If CD player changes
tracks, then go to Step 3.
• If not, replace CD player.
2
INSPECT CD
• Inspect condition of CD where error has
occurred.
• Is CD okay?
Yes
Go to next step.
No
Repair (remove foreign material) or replace CD, then go to
next step.
3
INSPECT CD PLAYER
• Clear DTC.
• Play CD and select other song (change
tracks).
• Start on-board diagnostic test mode.
• Is DTC 03:Er02 displayed?
Yes
Replace CD player.
No
Troubleshooting completed.
DTC 03:Er07
CD player
DETECTION
CONDITION
Note
• When error occurs, error message “CHECK CD” is displayed in the LCD.
• Base unit detects CD reading error.
POSSIBLE
CAUSE
• Defective CD (scratches or dirt)
• CD player malfunction
STEP
INSPECTION
ACTION
1
INSPECT CD
• Inspect condition of CD where error has
occurred.
• Is CD okay?
Yes
Go to next step.
No
Repair (remove foreign material) or replace CD, then go to
next step.
2
INSPECT CD PLAYER
• Clear DTC.
• Insert and play CD with no defect.
• Start on-board diagnostic test mode.
• Is DTC 03:Er07 displayed?
Yes
Replace CD player.
No
Troubleshooting completed.
DTC 00:Er01
Cassette deck
DETECTION
CONDITION
• Cassette deck cannot implement insert and eject commands.
POSSIBLE
CAUSE
• Defective cassette tape (deformation, broken, or foreign material stuck/attached)
• Cassette deck malfunction
STEP
INSPECTION
ACTION
1
• Is cassette tape able to be ejected?
Yes
Go to next step.
No
Replace cassette deck.
2
INSPECT CASSETTE TAPE
• Inspect condition of cassette tape where
error has occurred.
• Is cassette tape okay?
Yes
Go to next step.
No
Repair (remove foreign material) or replace cassette tape,
then go to next step.
T–172
ON-BOARD DIAGNOSTIC [AUDIO]
End Of Sie
DTC 00:ER03
A6E817566900W16
Diagnostic procedure
End Of Sie
DTC 00:ER04
A6E817566900W17
Diagnostic procedure
End Of Sie
DTC 05:ER01
A6E817566900W18
3
INSPECT CASSETTE DECK
• Clear DTC.
• Insert and eject cassette tape with no defect.
• Start on-board diagnostic test mode.
• Is DTC 00:Er01 displayed?
Yes
Replace cassette deck.
No
Troubleshooting completed.
STEP
INSPECTION
ACTION
DTC 00:Er03
Cassette deck
DETECTION
CONDITION
• Base unit detects that reel built into cassette deck does not operate.
POSSIBLE
CAUSE
• Defective cassette tape (tape slack, pinched tape in internal cassette deck)
• Cassette deck malfunction
STEP
INSPECTION
ACTION
1
INSPECT CASSETTE TAPE
• Inspect condition of cassette tape where
error has occurred.
• Is cassette tape okay?
Yes
Go to next step.
No
Repair (remove tape slack or repair pinched tape) or
replace cassette tape, then go to next step.
2
INSPECT CASSETTE DECK
• Clear DTC.
• Insert cassette tape with no defect.
• Play cassette tape for 20 seconds or more.
• Start on-board diagnostic test mode.
• Is DTC 00:Er03 displayed?
Yes
Replace cassette deck.
No
Troubleshooting completed.
DTC 00:Er04
Cassette tape
DETECTION
CONDITION
Note
• When error occurs, error message “CHECK TAPE” is displayed in the LCD.
• Cassette tape is worn out.
POSSIBLE
CAUSE
• Tape wear
• Cassette deck malfunction
STEP
INSPECTION
ACTION
1
INSPECT CASSETTE TAPE
• Inspect condition of cassette tape where
error has occurred.
• Is cassette tape okay?
Yes
Go to next step.
No
Replace cassette tape, then go to next step.
2
INSPECT CASSETTE DECK
• Clear DTC.
• Insert cassette tape with no defect.
• Play cassette tape for 20 seconds or more.
• Start on-board diagnostic test mode.
• Is DTC 00:Er04 displayed?
Yes
Replace cassette deck.
No
Troubleshooting completed.
DTC 05:Er01
CD changer (external type)
DETECTION
CONDITION
• Changer function does not operate.
POSSIBLE
CAUSE
• Defective CD (broken or foreign material)
• Magazine malfunction
• CD changer (external type) malfunction
ON-BOARD DIAGNOSTIC [AUDIO]
T–173
T
Diagnostic procedure
End Of Sie
DTC 05:ER07
A6E817566900W19
Diagnostic procedure
End Of Sie
DTC 06:ER01
A6E817566900W20
Diagnostic procedure
STEP
INSPECTION
ACTION
1
VERIFY WHETHER MALFUNCTION IS IN CD
CHANGER OR OTHER PARTS
• Operate changer function.
• Is function okay?
Yes
Go to Step 4.
No
Not able to change particular
CD.
Go to next step.
Not able to change any CD.
Go to Step 3.
2
INSPECT CD
• Inspect condition of CD where error has
occurred.
• Is CD okay?
Yes
Go to next step.
No
Repair (remove foreign material) or replace CD, then go to
next step.
3
INSPECT MAGAZINE
• Inspect magazine.
• Is magazine okay?
Yes
Go to next step.
No
Repair or replace magazine, then go to next step.
4
INSPECT CD CHANGER (EXTERNAL TYPE)
• Clear DTC.
• Operate changer.
• Start on-board diagnostic test mode.
• Is DTC 05:Er01 displayed?
Yes
Replace CD changer (external type).
No
Troubleshooting completed.
DTC 05:Er07
CD changer (external type)
DETECTION
CONDITION
Note
• When error occurs, error message “CHECK CD” is displayed in the LCD.
• Base unit detects CD reading error.
POSSIBLE
CAUSE
• Defective CD (scratches or dirt)
• CD changer (external type) malfunction
STEP
INSPECTION
ACTION
1
VERIFY WHETHER MALFUNCTION IS IN CD
CHANGER OR OTHER PARTS
• Play all CD in magazine.
• Is CD changer able to read them properly?
Yes
Go to Step 3.
No
Not able to change particular
CD.
Go to next step.
Not able to change any CD.
Go to Step 3.
2
INSPECT CD
• Inspect condition of CD where error has
occurred.
• Is CD okay?
Yes
Go to next step.
No
Repair (remove foreign material) or replace CD, then go to
next step.
3
INSPECT CD CHANGER (EXTERNAL TYPE)
• Clear DTC.
• Insert and play CD with no defect.
• Start on-board diagnostic test mode.
• Is DTC 05:Er07 displayed?
Yes
Replace CD changer (external type).
No
Troubleshooting completed.
DTC 06:Er01
CD changer (upper module)
DETECTION
CONDITION
• CD changer (upper module) cannot implement insert, eject, and disc change commands.
POSSIBLE
CAUSE
• Defective CD (broken or foreign material stuck/attached)
• CD changer (upper module) malfunction
STEP
INSPECTION
ACTION
1
• Is CD able to be ejected?
Yes
Go to next step.
No
Replace CD changer (upper module).
2
INSPECT CD
• Inspect condition of CD where error has
occurred.
• Is CD okay?
Yes
Go to next step.
No
Repair (remove foreign material) or replace CD, then go to
next step.
T–174
ON-BOARD DIAGNOSTIC [AUDIO]
End Of Sie
DTC 06:ER02
A6E817566900W21
Diagnostic procedure
End Of Sie
DTC 06:ER07
A6E817566900W22
Diagnostic procedure
3
INSPECT CD CHANGER (UPPER MODULE)
• Clear DTC.
• Insert and eject CD with no defect.
• Start on-board diagnostic test mode.
• Is DTC 06:Er01 displayed?
Yes
Replace CD changer (upper module).
No
Troubleshooting completed.
STEP
INSPECTION
ACTION
DTC 06:Er02
CD changer (upper module)
DETECTION
CONDITION
Note
• When error occurs, error message “CHECK CD” is displayed in the LCD.
• Cannot play CD normally or change tracks.
POSSIBLE
CAUSE
• Defective CD (scratches or dirt)
• CD changer (upper module) malfunction
STEP
INSPECTION
ACTION
1
VERIFY WHETHER MALFUNCTION IS IN CD
CHANGER (UPPER MODULE) OR CD
• Play all CDs in changer and select other
song (change tracks).
• Is CD changer able to change tracks?
Yes
Go to Step 3.
No
Not able to change particular
tracks.
Go to next step.
Not able to change any
tracks.
Change CD and perform
track-change again.
• If CD changer changes
tracks, go to Step 3.
• If not, replace CD
changer (upper module).
2
INSPECT CD
• Inspect condition of CD where error has
occurred.
• Is CD okay?
Yes
Go to next step.
No
Repair (remove foreign material) or replace CD, then go to
next step.
3
INSPECT CD CHANGER (UPPER MODULE)
• Clear DTC.
• Play CD and select other song (change
tracks).
• Start on-board diagnostic test mode.
• Is DTC 06:Er02 displayed?
Yes
Replace CD changer (upper module).
No
Troubleshooting completed.
DTC 06:Er07
CD changer (upper module)
DETECTION
CONDITION
Note
• When error occurs, error message “CHECK CD” is displayed in the LCD.
• Base unit detects CD reading error.
POSSIBLE
CAUSE
• Defective CD (scratches or dirt)
• CD changer (upper module) malfunction
STEP
INSPECTION
ACTION
1
VERIFY WHETHER MALFUNCTION IS IN CD
CHANGER (UPPER MODULE) OR CD
• Play all CDs in changer.
• Is CD changer able to read them properly?
Yes
Go to Step 3.
No
Not able to read particular
CD.
Go to next step.
Not able to read any CD.
Go to Step 3.
2
INSPECT CD
• Inspect condition of CD where error has
occurred.
• Is CD okay?
Yes
Go to next step.
No
Repair (remove foreign material) or replace CD, then go to
next step.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст