Mazda 6. Manual — part 335
AUDIO AND NAVIGATION SYSTEM
T–99
T
2. While pressing down the unit behind the LCD
unit, pull the LCD unit out from the dashboard.
End Of Sie
AUDIO CONTROL SWITCH REMOVAL/INSTALLATION
A6E812400148W01
Note
• The audio control switch and the cruise control switch use a common connector.
1. Disconnect the negative battery cable.
2. Remove the driver-side air bag module. (See
T–120 DRIVER-SIDE AIR BAG MODULE REMOVAL/
3. Remove the steering wheel.
4. Remove in the order indicated in the table.
5. Install in the reverse order of removal.
End Of Sie
A6E8124W018
1
Bolt
2
Bracket
3
Screw
4
Cover
5
Screw
6
Audio control switch/cruise control switch
A6E8124W019
T–100
AUDIO AND NAVIGATION SYSTEM
AUDIO CONTROL SWITCH INSPECTION
A6E812400148W02
1. Disconnect the negative battery cable.
2. Remove the driver-side air bag module. (See
T–120 DRIVER-SIDE AIR BAG MODULE REMOVAL/
3. Disconnect the audio control switch connector.
4. Measure the resistance and inspect for continuity
between the cruise control switch terminals using
an ohmmeter.
• If not as specified, replace the cruise control
switch.
End Of Sie
AUDIO AMPLIFIER REMOVAL/INSTALLATION
A6E812466910W01
1. Disconnect the negative battery cable.
2. Remove in the order indicated in the table.
3. Install in the reverse order of removal.
End Of Sie
A6E8124W043
A6E8124W028
1
Bolt
2
Connector
3
Audio amplifier
A6E8124W010
AUDIO AND NAVIGATION SYSTEM
T–101
T
FRONT DOOR SPEAKER REMOVAL/INSTALLATION
A6E812466960W01
1. Disconnect the negative battery cable.
2. Remove the front door trim.
3. Remove in the order indicated in the table.
4. Install in the reverse order of removal.
Front Door Speaker Installation Note
1. Attach the speaker with the wiring harness placed
in the groove of the door unit panel.
Caution
• If the speaker is attached with the
harness placed outside of the groove, the
wiring harness might be broken.
End Of Sie
FRONT DOOR SPEAKER INSPECTION
A6E812466960W02
1. Inspect for resistance between the front door
speaker terminals using an ohmmeter.
• If not as specified, replace the front door
speaker.
2. To verify that the front door speaker outputs sound, apply voltage to the front door speaker and release using a
1.5-V battery.
• If not outputs sound, replace the front door speaker.
End Of Sie
1
Screw
2
Connector
3
T–101 Front Door Speaker Installation Note
A6E8124W001
A6E8124W002
A6E8124W040
A6E8124W032
T–102
AUDIO AND NAVIGATION SYSTEM
REAR DOOR SPEAKER REMOVAL/INSTALLATION
A6E812466964W01
1. Disconnect the negative battery cable.
2. Remove the rear door trim.
3. Remove in the order indicated in the table.
4. Install in the reverse order of removal.
Rear Door Speaker Installation Note
1. Attach the speaker with the wiring harness placed
in the groove of the door unit panel.
Caution
• If the speaker is attached with the
harness placed outside of the groove, the
wiring harness might be broken.
End Of Sie
REAR DOOR SPEAKER INSPECTION
A6E812466964W02
1. Inspect for resistance between the rear door
speaker terminals using an ohmmeter.
• If not as specified, replace the rear door
speaker.
2. To verify that the rear door speaker outputs sound, apply voltage to the rear door speaker and release using a
1.5-V battery.
• If not outputs sound, replace the rear door speaker.
End Of Sie
1
Screw
2
Connector
3
Rear door speaker
(See
T–102 Rear Door Speaker Installation Note
A6E8124W003
A6E8124W002
A6E8124W040
A6E8124W032
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст