Mazda 6. Manual — part 281
DOOR
S–19
S
10. For power window system-equipped vehicles,
remove the power window motor and power
window regulator from the door unit. For manual
window system-equipped vehicles, remove the
regulator handle and manual window regulator.
11. Install in the reverse order of removal.
End Of Sie
FRONT DOOR LATCH AND LOCK ACTUATOR REMOVAL/INSTALLATION
A6E771458310W01
1. Remove the front door unit.
2. Remove the screws, then remove the front door
latch and door lock actuator.
3. Install in the reverse order of removal.
End Of Sie
REAR DOOR LATCH AND LOCK ACTUATOR REMOVAL/INSTALLATION
A6E771472310W01
1. Remove the rear door unit.
2. Remove the screws, then remove the rear door
latch and lock actuator.
3. Install in the reverse order of removal.
End Of Sie
A6E7714W017
A6E7714W013
A6E7714W020
S–20
DOOR
FRONT DOOR KEY CYLINDER REMOVAL/INSTALLATION
A6E771458310W03
1. Remove the front door unit.
2. Remove the cover, then remove the bolt.
3. For protector-equipped vehicles, pull out the
protector tab from the latch and remove the
protector.
4. Disconnect the rod.
5. Remove the front outer handle.
6. Turn the key cylinder in the direction indicated by
the arrow (1) and move the hook to the notch.
7. Pull the key cylinder towards you (2) to remove it.
8. Install in the reverse order of removal.
End Of Sie
A6E7714W027
A6E7714W028
A6E7714W029
DOOR
S–21
S
FRONT OUTER HANDLE REMOVAL/INSTALLATION
A6E771458410W01
1. Remove the front door glass.
2. Detach the outer handle and front door latch rod.
3. For protector-equipped vehicles, refer to key cylinder removal/installation to remove the protector.
4. Remove the bolts.
5. With the rear side of the outer handle fixed and
the outer handle lever pulled out (1), remove the
rear side of the outer handle from the front door.
6. Pull out the front side of the outer handle from the
front door.
7. Install in the reverse order of removal.
End Of Sie
REAR OUTER HANDLE REMOVAL/INSTALLATION
A6E771458410W02
1. Remove the rear door glass.
2. Remove the rear door unit.
3. Remove the rear door latch.
4. Remove the bolts.
5. Detach the rear outer handle and rear door latch
rod.
6. With the rear side of the rear outer handle fixed
and the outer handle lever pulled out (1), remove
the rear side of the rear outer handle from the
rear door.
7. Pull out the front side of the rear outer handle
from the rear door.
8. Install in the reverse order of removal.
End Of Sie
A6E7714W004
A6E7714W005
A6E7714W018
A6E7714W019
S–22
DOOR
INNER HANDLE REMOVAL/INSTALLATION
A6E771458330W01
1. Remove the front door trim.
2. Using a flathead screwdriver, press and hold the
hook in the direction indicated by arrow (1), and
pull the shaft in the direction indicated by arrow
(2), remove the shaft.
3. Pull off the inner handle, and remove the door
lock knob cable and inner handle cable.
4. Install in the reverse order of removal.
End Of Sie
REGULATOR HANDLE REMOVAL
A6E771458580W01
1. Remove the regulator handle clip using a rag as
shown.
End Of Sie
REGULATOR HANDLE INSTALLATION
A6E771458580W02
1. Install the clip in the regulator handle.
2. Close the door glass fully and push the regulator
handle on as shown.
End Of Sie
A6E7714W010
A6E7714W008
A6E7714W009
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст