Mazda CX 7. Manual — part 407
EXTERIOR TRIM
09-16–11
09-16
RADIATOR GRILLE REMOVAL/INSTALLATION
id091600800900
1. Remove the front bumper. (See 09-10-2 FRONT BUMPER REMOVAL/INSTALLATION.)
2. Remove the intercooler duct.
3. Remove the fasteners.
4. Remove the screws A.
5. Remove the grill bracket.
6. Remove the screws B
7. Remove the front bumper retainer.
8. Remove the tabs A and B.
9. Remove the ornament.
10. Remove the screws C.
11. Remove the tabs C
12. Remove the radiator grill.
13. Press tabs C in the direction of the arrow, pull the
radiator grille inward, and remove it from the front
bumper.
14. Install in the reverse order of removal.
End Of Sie
COWL GRILLE REMOVAL/INSTALLATION
id091600801000
1. Remove the windshield wiper arm and blade. (See 09-19-3 WINDSHIELD WIPER ARM AND BLADE
REMOVAL/INSTALLATION.)
2. Remove the front fender molding.
3. Remove the weatherstrip.
4. Remove the fastener.
5. Pull the cowl grille in the direction of arrow (1) so that it is free from the pins, pull tabs A in the direction of arrow
(2), and then remove the front window glass.
A
A
A
B
B
C
C
C C
C
C
ORNAMENT
RADIATOR
GRILL
FASTENER
FASTENER
SCREW A
SCREW B
SCREW C
GRILL BRACKET
TAB A
TAB B
TAB C
FRONT BUMPER
RETAINER
acxuuw00001633
A
A
A
A
A
A
A
A
A
A
FRONT FENDER
MOLDING
(2)
(1)
COWL GRILLE
WEATHERSTRIP
FASTENER
FASTENER
TAB A
PIN
PIN
COWL GRILLE
(LH)
COWL PANEL
COWL GRILLE
(RH)
WINDSHIELD
acxuuw00000912
EXTERIOR TRIM
09-16–12
6. Remove the windshield washer hose.
7. Remove the cowl grille.
8. Install in the reverse order of removal.
End Of Sie
EXTRACTOR CHAMBER REMOVAL/INSTALLATION
id091600801500
1. Remove the rear combination light. (See 09-18-11 REAR COMBINATION LIGHT REMOVAL/INSTALLATION.)
2. Remove the rear bumper. (See 09-10-4 REAR BUMPER REMOVAL/INSTALLATION.)
3. Remove clip A using a fastener remover and then
remove the extractor chamber from the vehicle.
4. Install in the reverse order of removal.
End Of Sie
REAR SPOILER REMOVAL/INSTALLATION
id091600801600
1. Remove the liftgate upper trim. (See 09-17-25 LIFTGATE UPPER TRIM REMOVAL/INSTALLATION.)
2. Remove the nuts.
3. Detach the clips and remove the rear spoiler.
4. Install in the reverse order of removal.
End Of Sie
ROOF CARRIER BRACKET REMOVAL/INSTALLATION
id091600801700
1. Disconnect the negative battery cable.
2. Partially peel back the seaming welt.
3. Remove the following parts:
(1) A-pillar lower trim (See 09-17-16 A-PILLAR LOWER TRIM REMOVAL/INSTALLATION.)
(2) A-pillar trim (See 09-17-15 A-PILLAR TRIM REMOVAL/INSTALLATION.)
(3) Front scuff plate inner (See 09-17-19 FRONT SCUFF PLATE REMOVAL/INSTALLATION.)
(4) Rear scuff plate inner (See 09-17-19 REAR SCUFF PLATE REMOVAL/INSTALLATION.)
(5) B-pillar lower trim (See 09-17-16 B-PILLAR LOWER TRIM REMOVAL/INSTALLATION.)
(6) Front seat belt upper anchor installation bolt (See 08-11-2 FRONT SEAT BELT REMOVAL/
INSTALLATION.)
(7) B-pillar upper trim (See 09-17-16 B-PILLAR UPPER TRIM REMOVAL/INSTALLATION.)
(8) Rear seat (See 09-13-7 REAR SEAT REMOVAL/INSTALLATION.)
(9) Sub trunk box (See 09-17-25 SUB TRUNK BOX REMOVAL/INSTALLATION.)
(10)Trunk end trim (See 09-17-24 TRUNK END TRIM REMOVAL/INSTALLATION.)
(11)Trunk side trim (See 09-17-24 TRUNK SIDE TRIM REMOVAL/INSTALLATION.)
(12)C-pillar trim (See 09-17-17 C-PILLAR TRIM REMOVAL/INSTALLATION.)
(13)D-pillar trim (See 09-17-18 D-PILLAR TRIM REMOVAL/INSTALLATION.)
(14)Map light (See 09-18-22 MAP LIGHT REMOVAL/INSTALLATION.)
WINDSHIELD WASHER HOSE
COWL GRILLE
(RH)
JOINT PIPE A
acxuuw00000913
A
A
CLIP A
EXTRACTOR CHAMBER
acxuuw00000920
CLIP A
NUT
A
A
3.0—5.0 N·m
{30.6—50.9 kgf·cm,
26.6—44.2 in·lbf}
acxuuw00000902
EXTERIOR TRIM
09-16–13
09-16
(15)Sunvisor (See 09-17-26 SUNVISOR REMOVAL/INSTALLATION.)
(16)Assist handle (See 09-17-27 ASSIST HANDLE REMOVAL/INSTALLATION.)
(17)Headliner (See 09-17-27 HEADLINER REMOVAL/INSTALLATION.)
4. Remove the nuts.
5. Remove the roof carrier bracket.
6. Install in the reverse order of removal.
Note
• Install the roof carrier bracket so that the
arrow on it faces inward.
End Of Sie
WM: AERO PART
SIDE GARNISH REMOVAL
id091600804600
Front
1. Pull the side garnish and remove clips A from the
vehicle body.
2. Slide the side garnish to the vehicle rear and
remove clips B from the side garnish.
3. Remove the side garnish.
4. Remove clips B from the body, then install it to the
side garnish.
Rear
1. Pull the side garnish and remove clips A from the
vehicle body
2. Slide the side garnish to the vehicle front and
remove clips B from the side garnish.
3. Remove the side garnish.
4. Remove clips B from the body, then install it to the
side garnish.
End Of Sie
ROOF CARRIER
BRACKET
7.8—10.7 N·m
{80—109 kgf·cm,
70—94 in·lbf}
NUT
acxuuw00000928
A
A
A
B
B
B
B
B
B
B
B
CLIP A, B
REAR
FRONT
SIDE GARNISH
SEC. A—A, B—B
acxuuw00000893
A
A
A
B
B
B
B
B
B
CLIP A, B
REAR
FRONT
SIDE GARNISH
SEC. A—A, B—B
acxuuw00000894
EXTERIOR TRIM
09-16–14
SIDE GARNISH INSTALLATION
id091600804500
Front
1. Install clips A and then B to the vehicle from the
front side.
Rear
1. Install clips A and then B to the vehicle from the
rear side.
End Of Sie
SIDE STEP MOLDING REMOVAL
id091600804400
1. Remove the fastener.
2. Pull the side step molding front and remove clip A
from the vehicle body.
3. Slide the side step molding front to the vehicle
front and remove clip B from the side step
molding front.
4. Remove the side step molding front.
5. Remove clips B from the body, then install it to the
side step molding front.
6. Pull the side step molding front and remove clip C
and F from the vehicle body.
7. Detach clip D using a tape-wrapped flathead
screwdriver as shown in the figure.
8. Slide the side step molding to the vehicle rear and
remove clips E from the side step molding.
9. Remove the side step molding.
10. Remove clips E from the body, then install it to the
side step molding.
End Of Sie
A
A
A
B
B
B
B
B
B
B
B
CLIP A, B
REAR
FRONT
SIDE GARNISH
SEC. A—A, B—B
acxuuw00000895
A
A
A
B
B
B
B
B
B
CLIP A, B
REAR
FRONT
SIDE GARNISH
SEC. A—A, B—B
acxuuw00000896
FRONT SIDE STEP MOLDING
CLIP A
CLIP B
A
B
FRONT
FASTENER
acxuuw00002411
E
C
E
E
E
E
E
E
E
E
D
F
FLATHEAD
SCREWDRIVER
STONE GUARD
SIDE STEP MOLDING
CLIP F
CLIP E
CLIP C
CLIP D
REAR
FRONT
acxuuw00000901
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст