Mazda CX-9 Grand Touring. Manual — part 117
PID/DATA MONITOR TABLE
PID/DATA MONITOR CHART
SYSTEM] .)
U0155
Communication error to instrument
cluster
(See DTC TABLE [MULTIPLEX COMMUNICATION
SYSTEM] .)
U1901
Combined sensor system (CAN2
line malfunction)
(See DTC U1901 [DSC/RSC].)
U2023 Steering angle sensor system
(See DTC C1278, C1295, U2023 [DSC/RSC].)
PID name
(definition)
Unit/Condition
Operation condition
(reference)
Action
DSC/RSC
HU/CM
terminal
ACCLMTR
G
Vehicle stopped
or driving at
constant speed: 0
G
Vehicle is driving
at a acceleration:
changes 0 G-
positive
Vehicle is driving
at a deceleration:
changes 0 G-
negative
Inspect the combined sensor.
(See COMBINED SENSOR
INSPECTION .)
-
BOO_ABS (Brake
pedal switch input)
Off/On
Brake pedal
depressed: On
Brake pedal
released: Off
Inspect the brake switch.
(See BRAKE SWITCH
INSPECTION .)
-
CCNTABS
(Number of
continuous codes)
-
Indicates number of
DTC
Perform the DTC inspection.
(See DTC TABLE.)
-
LAT_ACCL
G
Vehicle stopped
or driving at
constant speed: 0
G
Cornering to
right: Changes 0
G-positive
Cornering to left:
Changes 0 G-
negative
Inspect the combined sensor.
(See COMBINED SENSOR
INSPECTION .)
-
Brake pedal
2008 Mazda CX-9 Grand Touring
2008 BRAKES On-Board Diagnostic (DSC/RSC) - Mazda CX-9
Microsoft
Sunday, November 15, 2009 9:50:12 AM
Page 9
© 2005 Mitchell Repair Information Company, LLC.
MCYLI P
Pa, psi
released: 0 Pa, 0
psi
Brake pedal
depressed:
Changes
according to the
brake fluid
pressure
Inspect the brake fluid
pressure sensor.
(See BRAKE FLUID
PRESSURE SENSOR
INSPECTION .)
-
PMP_MOTOR
(Pump motor
output state)
Off/On
Pump motor
activated: On
Pump motor not
activated: Off
Inspect the DSC/RSC
HU/CM.
(See DSC/RSC SYSTEM
INSPECTION .)
-
SHIFT_P
(Transaxle gear
position input)
Off/On
Selector lever
position P: On
Other than those
above: Off
Inspect the TCM.
(See TCM INSPECTION
[AW6A-EL, AW6AX-EL] .)
-
PWR_RLY (Valve
relay output state)
Off/On
Valve relay
activated: On
Valve relay not
activated: Off
Inspect the DSC/RSC
HU/CM.
(See DSC/RSC SYSTEM
INSPECTION .)
-
ROLL_RATE
(Roll rate sensor
input)
°/s
Vehicle stopped
or driving
straight: 0 c/s
Cornering to left:
0 °/s-positive
Cornering to
right: 0 °/s-
negative
Inspect the combined sensor.
(See COMBINED SENSOR
INSPECTION .)
-
SWA_POS
(Steering angle
sensor input)
°
Steering wheel
neutral position
(not turned): 0°
Steering wheel
turned to left:
Changes 0 °-
negative
Steering wheel
turned to right:
Changes 0 °-
positive
Inspect the steering angle
sensor.
(See STEERING ANGLE
SENSOR INSPECTION .)
-
TCS_OFF_SW
(TCS OFF switch
input)
Off/On
TCS OFF switch
is depressed: On
TCS OFF switch
Inspect the TCS OFF switch.
(See TCS OFF SWITCH
INSPECTION .)
U
2008 Mazda CX-9 Grand Touring
2008 BRAKES On-Board Diagnostic (DSC/RSC) - Mazda CX-9
Microsoft
Sunday, November 15, 2009 9:50:12 AM
Page 10
© 2005 Mitchell Repair Information Company, LLC.
is released* Off
V_LF_INL (Left
front inlet solenoid
valve output state)
Off/On
Solenoid valve
activated: On
Solenoid valve
not activated: Off
Inspect the DSC/RSC
HU/CM.
(See DSC/RSC SYSTEM
INSPECTION .)
-
V_LF_OTL (Left
front outlet
solenoid valve
output state)
Off/On
Solenoid valve
activated: On
Solenoid valve
not activated: Off
Inspect the DSC/RSC
HU/CM.
(See DSC/RSC SYSTEM
INSPECTION .)
-
V_LR_INL (Left
rear inlet solenoid
valve output state)
Off/On
Solenoid valve
activated: On
Solenoid valve
not activated: Off
Inspect the DSC/RSC
HU/CM.
(See DSC/RSC SYSTEM
INSPECTION .)
-
V_LR_OTL (Left
rear outlet solenoid
valve output state)
Off/On
Solenoid valve
activated: On
Solenoid valve
not activated: Off
Inspect the DSC/RSC
HU/CM.
(See DSC/RSC SYSTEM
INSPECTION .)
-
V_RF_INL (Right
front inlet solenoid
valve output state)
Off/On
Solenoid valve
activated: On
Solenoid valve
not activated: Off
Inspect the DSC/RSC
HU/CM.
(See DSC/RSC SYSTEM
INSPECTION .)
-
V_RF_OTL (Right
front outlet
solenoid valve
output state)
Off/On
Solenoid valve
activated: On
Solenoid valve
not activated: Off
Inspect the DSC/RSC
HU/CM.
(See DSC/RSC SYSTEM
INSPECTION .)
-
V_RR_INL (Right
rear inlet solenoid
valve output state)
Off/On
Solenoid valve
activated: On
Solenoid valve
not activated: Off
Inspect the DSC/RSC
HU/CM.
(See DSC/RSC SYSTEM
INSPECTION .)
-
V_RR_OTL (Right
rear outlet solenoid
valve output state)
Off/On
Solenoid valve
activated: On
Solenoid valve
not activated: Off
Inspect the DSC/RSC
HU/CM.
(See DSC/RSC SYSTEM
INSPECTION .)
-
V_STB_L (LH
stability control
solenoid valve
output state)
Off/On
Solenoid valve
activated: On
Solenoid valve
not activated: Off
Inspect the DSC/RSC
HU/CM.
(See DSC/RSC SYSTEM
INSPECTION .)
-
V_STB_R (RH
stability control
solenoid valve
Off/On
Solenoid valve
activated: On
Solenoid valve
Inspect the DSC/RSC
HU/CM.
(See DSC/RSC SYSTEM
-
2008 Mazda CX-9 Grand Touring
2008 BRAKES On-Board Diagnostic (DSC/RSC) - Mazda CX-9
Microsoft
Sunday, November 15, 2009 9:50:12 AM
Page 11
© 2005 Mitchell Repair Information Company, LLC.
output state)
not activated: Off INSPECTION .)
V_TRC_L (LH
traction control
solenoid valve
output state)
Off/On
Solenoid valve
activated: On
Solenoid valve
not activated: Off
Inspect the DSC/RSC
HU/CM.
(See DSC/RSC SYSTEM
INSPECTION .)
-
V_TRC_R (RH
traction control
solenoid valve
output state)
Off/On
Solenoid valve
activated: On
Solenoid valve
not activated: Off
Inspect the DSC/RSC
HU/CM.
(See DSC/RSC SYSTEM
INSPECTION .)
-
WSPD_LF (Left
front ABS wheel-
speed sensor input)
KPH, MPH
Vehicle stopped:
0 KPH, 0 MPH
Vehicle running:
vehicle speed
Inspect the ABS wheel-speed
sensor.
(See FRONT ABS WHEEL-
SPEED SENSOR
INSPECTION .)
AG, AD
WSPD_LR (Left
rear ABS wheel-
speed sensor input)
KPH, MPH
Vehicle stopped:
0 KPH, 0 MPH
Vehicle running:
vehicle speed
Inspect the ABS wheel-speed
sensor.
(See REAR ABS WHEEL-
SPEED SENSOR
INSPECTION [2WD] .) (See
REAR ABS WHEEL-
SPEED SENSOR
INSPECTION [AWD] .)
F, I
WSPD_RF (Right
front ABS wheel-
speed sensor input)
KPH, MPH
Vehicle stopped:
0 KPH, 0 MPH
Vehicle running:
vehicle speed
Inspect the ABS wheel-speed
sensor.
(See FRONT ABS WHEEL-
SPEED SENSOR
INSPECTION .)
AE, AB
WSPD_RR (Right
rear ABS wheel-
speed sensor input)
KPH, MPH
Vehicle stopped:
0 KPH, 0 MPH
Vehicle running:
vehicle speed
Inspect the ABS wheel-speed
sensor.
(See REAR ABS WHEEL-
SPEED SENSOR
INSPECTION [2WD] .) (See
REAR ABS WHEEL-
SPEED SENSOR
INSPECTION [AWD] .)
G, J
YAW_RATE
°/s
Vehicle stopped
or driving
straight: 0 °/s
Cornering to left:
Changes 0 °/s-
negative
Cornering to
right: Changes 0
°/s-positive
Inspect the combined sensor.
(See COMBINED SENSOR
INSPECTION .)
-
2008 Mazda CX-9 Grand Touring
2008 BRAKES On-Board Diagnostic (DSC/RSC) - Mazda CX-9
Microsoft
Sunday, November 15, 2009 9:50:12 AM
Page 12
© 2005 Mitchell Repair Information Company, LLC.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст