Mazda CX-9 Grand Touring. Manual — part 598
POWER WINDOW MOTOR INSPECTION
FRONT SIDE
1. Apply battery positive voltage and connect the ground to power window motor terminals E and F, and
then inspect the power window motor operation.
If the power window motor does not operate as indicated in the table, replace it.
module. If this happens, insert a hand through the speaker
installation hole to engage the drum housing tabs, and install the
power window motor to the drum while supporting the drum housing.
Fig. 15: Identifying Power Window Motor Components & Torque
Specifications
Courtesy of MAZDA MOTORS CORP.
CAUTION:
If the power window motor temperature is high, the motor may
not rotate due to the motor internal bimetal function. Leave it
untouched for about 3 min to cool it down, then reinspect.
2008 Mazda CX-9 Grand Touring
2008 BODY & ACCESSORIES Glass/Windows/Mirrors - Mazda CX-9
Microsoft
Sunday, November 15, 2009 10:36:16 AM
Page 10
© 2005 Mitchell Repair Information Company, LLC.
CONNECTOR TERMINAL REFERENCE
2. Connect the battery positive voltage to power window motor terminal D and connect terminal C to
ground.
3. Operate the power window motor and measure the voltage at terminals A and B.
If there is any malfunction, replace the power window motor.
Voltage
Pulse: max. 12 V/min. 0 V
REAR SIDE
1. Apply battery positive voltage and connect the ground to the power window motor terminals, and then
inspect the power window motor operation.
If the power window motor does not operate as indicated in the table, replace it.
Fig. 16: Power Window Motor (Front Side) - Circuit Diagram
Courtesy of MAZDA MOTORS CORP.
Operation
Terminal
F
E
Open
B+
Ground
Close
Ground
B+
CAUTION:
If the power window motor temperature is high, the motor may
not rotate due to the motor internal bimetal function. Leave it
untouched for about 3 min to cool it down, then reinspect.
2008 Mazda CX-9 Grand Touring
2008 BODY & ACCESSORIES Glass/Windows/Mirrors - Mazda CX-9
Microsoft
Sunday, November 15, 2009 10:36:16 AM
Page 11
© 2005 Mitchell Repair Information Company, LLC.
CONNECTOR TERMINAL REFERENCE
POWER WINDOW MAIN SWITCH REMOVAL/INSTALLATION
1. Disconnect the negative battery cable.
2. Remove the inner garnish. (See INNER GARNISH REMOVAL/INSTALLATION .)
3. Remove the front door trim. (See FRONT DOOR TRIM REMOVAL/INSTALLATION )
4. Remove the screw, and remove the power window main switch from inside the front door trim.
5. Install in the reverse order of removal.
Fig. 18: Identifying Power Window Main Switch & Screw
Courtesy of MAZDA MOTORS CORP.
POWER WINDOW MAIN SWITCH INSPECTION
Fig. 17: Power Window Motor (Rear Side) - Circuit Diagram
Courtesy of MAZDA MOTORS CORP.
Operation
Terminal
F
E
Open
B+
Ground
Close
Ground
B+
NOTE:
Before proceeding with diagnosis of malfunctioning power windows,
2008 Mazda CX-9 Grand Touring
2008 BODY & ACCESSORIES Glass/Windows/Mirrors - Mazda CX-9
Microsoft
Sunday, November 15, 2009 10:36:16 AM
Page 12
© 2005 Mitchell Repair Information Company, LLC.
FRONT SIDE
1. Measure the voltage at each terminal (other than terminals 1M and 2A).
If the voltage is not as specified in the Terminal Voltage Table, inspect the parts under "inspection
item(s)" and related wiring harnesses.
2. Disconnect the negative battery cable.
3. If the system does not work properly even though the inspection items or related wiring harnesses do not
have any malfunction, replace the power window main switch.
Fig. 19: Identifying Power Window Main Switch Connector Terminal
Courtesy of MAZDA MOTORS CORP.
VOLTAGE SPECIFICATION
ensure the POWER WINDOW INITIALIZATION PROCEDURE has been
performed.
Terminal Signal name
Connected
to
Measured
condition
Voltage (V)/
Continuity
Inspection item (s)
1E
IG 1
METER 10
A fuse
Ignition switch is
at ON position
B+
Inspect METER 10 A
fuse
Related wiring harnesses
Ignition switch is
at LOCK
position
1.0 or less
1F
Power-cut
signal
Power
window
subswitch
Ignition switch at
ON and power-
cut switch at
UNLOCK
B+
Power window
subswitch (See POWER
WINDOW
SUBSWITCH
INSPECTION)
Related wiring harnesses
1G
Communication
Power
window
subswitch
Because this terminal is for
communication, good/no good
judgment by terminal voltage is
not possible.
Power window
subswitch (See POWER
WINDOW
SUBSWITCH
INSPECTION)
2008 Mazda CX-9 Grand Touring
2008 BODY & ACCESSORIES Glass/Windows/Mirrors - Mazda CX-9
Microsoft
Sunday, November 15, 2009 10:36:16 AM
Page 13
© 2005 Mitchell Repair Information Company, LLC.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст