Mazda CX-9 Grand Touring. Manual — part 491

3. Install in the reverse order of removal.

CARGO COMPARTMENT LIGHT BULB

1. Disconnect the negative battery cable.

2. Insert a tape-wrapped flathead screwdriver into the service hole and pry with the screwdriver in the

direction shown by the arrow to remove the lens.

Fig. 67: Inserting Screwdriver Into Service Hole
Courtesy of MAZDA MOTORS CORP.

3. Remove the cargo compartment light bulb.

4. Install in the reverse order of removal.

Fig. 68: Identifying Cargo Compartment Light & Bulb
Courtesy of MAZDA MOTORS CORP.

CARGO COMPARTMENT LIGHT INSPECTION

1. Verify that the continuity between the cargo compartment light terminals is as indicated in the table.



If not as indicated in the table, replace the cargo compartment light.

2008 Mazda CX-9 Grand Touring

2008 BODY & ACCESSORIES Lighting Systems - Mazda CX-9

Microsoft

Sunday, November 15, 2009 10:39:06 AM

Page 45

© 2005 Mitchell Repair Information Company, LLC.

Fig. 69: Terminals Continuity Chart
Courtesy of MAZDA MOTORS CORP.

Fig. 70: Checking Continuity Between Cargo Compartment Light Terminals
Courtesy of MAZDA MOTORS CORP.

COURTESY LIGHT BULB REMOVAL/INSTALLATION

1. Disconnect the negative battery cable.

2. Remove in the order indicated in the table.

Fig. 71: Identifying Courtesy Light Bulb & Lens
Courtesy of MAZDA MOTORS CORP.

3. Install in the reverse order of removal.

LENS REMOVAL NOTE

1. Insert a tape-wrapped flathead screwdriver into the service hole and pry with the screwdriver in the

2008 Mazda CX-9 Grand Touring

2008 BODY & ACCESSORIES Lighting Systems - Mazda CX-9

Microsoft

Sunday, November 15, 2009 10:39:06 AM

Page 46

© 2005 Mitchell Repair Information Company, LLC.

direction shown by the arrow to remove the lens.

Fig. 72: Inserting Screwdriver Into Service Hole
Courtesy of MAZDA MOTORS CORP.

IGNITION KEY ILLUMINATION BULB REMOVAL/INSTALLATION

VEHICLES WITHOUT ADVANCED KEYLESS SYSTEM

1. Disconnect the negative battery cable.

2. Pull the upper column cover upward and detach the upper column cover from the lower column cover.

(See COLUMN COVER REMOVAL/INSTALLATION .)

3. Put aside the upper columm cover.

4. Remove the ignition key illumination bulb.

5. Install in the reverse order of removal.

Fig. 73: Identifying Ignition Key Illumination Bulb
Courtesy of MAZDA MOTORS CORP.

VEHICLES WITH ADVANCED KEYLESS SYSTEM

1. Disconnect the negative battery cable.

2. Remove the lower column cover. (See COLUMN COVER REMOVAL/INSTALLATION .)

3. Remove the coil antenna. (See COIL ANTENNA REMOVAL/INSTALLATION [ADVANCED

2008 Mazda CX-9 Grand Touring

2008 BODY & ACCESSORIES Lighting Systems - Mazda CX-9

Microsoft

Sunday, November 15, 2009 10:39:06 AM

Page 47

© 2005 Mitchell Repair Information Company, LLC.

KEYLESS SYSTEM] .)

4. Remove in the order indicated in the table.

Fig. 74: Identifying Ignition Key Illumination Bulb, Socket, Lens & Screw
Courtesy of MAZDA MOTORS CORP.

5. Install in the reverse order of removal.

SOCKET REMOVAL NOTE

1. Remove the socket by turning it in the direction shown by the arrow.

Fig. 75: Socket Removal
Courtesy of MAZDA MOTORS CORP.

GLOVE COMPARTMENT LIGHT BULB REMOVAL/INSTALLATION

1. Disconnect the negative battery cable.

2. Remove in the order indicated in the table.

2008 Mazda CX-9 Grand Touring

2008 BODY & ACCESSORIES Lighting Systems - Mazda CX-9

Microsoft

Sunday, November 15, 2009 10:39:06 AM

Page 48

© 2005 Mitchell Repair Information Company, LLC.