Mazda CX-9 Grand Touring. Manual — part 459
Fig. 13: Identifying Horn Components
Courtesy of MAZDA MOTORS CORP.
4. Install in the reverse order of removal.
INFORMATION DISPLAY REMOVAL/INSTALLATION
1. Disconnect the negative battery cable.
2. Remove the following parts:
1. Front console box mat (See FRONT CONSOLE BOX MAT REMOVAL/INSTALLATION .)
2. Indicator panel (See INDICATOR PANEL REMOVAL/INSTALLATION .)
3. Decoration panel (See DECORATION PANEL REMOVAL/INSTALLATION .)
4. Front console box (See FRONT CONSOLE BOX REMOVAL/INSTALLATION .)
5. Center panel (See CENTER PANEL REMOVAL/INSTALLATION .)
3. Remove in the order indicated in the table.
Fig. 14: Identifying Information Display Components
Courtesy of MAZDA MOTORS CORP.
4. Install in the reverse order of removal.
INFORMATION DISPLAY INPUT/OUTPUT CHECK MODE
CHECK CODE TABLE
CHECK CODE TABLE
NOTE:
In this mode, it is possible to verify the items in the following chart.
Check
code
Check item
Related items
2008 Mazda CX-9 Grand Touring
2008 BODY & ACCESSORIES Instrumentation/Driver Info - Mazda CX-9
Microsoft
Sunday, November 15, 2009 10:42:27 AM
Page 23
© 2005 Mitchell Repair Information Company, LLC.
01
Information display
CAN system
DTC U2516: CAN system communication error
02
Audio unit
Climate control unit
CAN system
DTC U0184: Communication error to audio unit
DTC U0164: Communication error to climate
control unit
04
TNS relay
TNS relay
TNS signal wiring harness
06
Ignition switch
Ignition switch
07
Dimmer cancel switch (Instrument
cluster)
Instrument cluster
Related wiring harness
-
LCD
LCD
NOTE:
The check codes are displayed in numerical order. (While performing the
inspection, if you want to inspect a check code with a number smaller than
the code number you are currently inspecting, terminate the check mode
then repeat the inspection from the beginning.)
Fig. 15: Information Display Input/Output Check Mode Procedure Chart
2008 Mazda CX-9 Grand Touring
2008 BODY & ACCESSORIES Instrumentation/Driver Info - Mazda CX-9
Microsoft
Sunday, November 15, 2009 10:42:27 AM
Page 24
© 2005 Mitchell Repair Information Company, LLC.
CHECK CODE INSPECTION
Check code 01
CHECK CODE INSPECTION CHART (CHECK CODE 01)
Check code 02
CHECK CODE INSPECTION CHART (CHECK CODE 02)
Courtesy of MAZDA MOTORS CORP.
Check code 01
CAN system
INSPECTION
CONDITION
DISPLAY
ACTION
Select the check
code 01.
CAN system of information display is normal.
CAN system communication error. (DTC
U2516) (See DTC TABLE [MULTIPLEX
COMMUNICATION SYSTEM] )
Check code 02
Communication status to audio unit
Communication status to climate control unit
INSPECTION
CONDITION
DISPLAY
ACTION
All communications are
normal.
2008 Mazda CX-9 Grand Touring
2008 BODY & ACCESSORIES Instrumentation/Driver Info - Mazda CX-9
Microsoft
Sunday, November 15, 2009 10:42:27 AM
Page 25
© 2005 Mitchell Repair Information Company, LLC.
Check code 04
CHECK CODE INSPECTION CHART (CHECK CODE 04)
Select the check
code 02. (The
diagnostic results
will be displayed
once each in the
order of audio unit
and heater control
unit.)
Audio unit
Communication to audio
unit is normal.
Communication error to
audio unit. (DTC U0184)
(See DTC TABLE
[MULTIPLEX
COMMUNICATION
SYSTEM] )
Vehicle without audio unit.
Climate control
unit
Communication to climate
control unit is normal.
Communication error to
climate control unit. (DTC
U0164)
(See DTC TABLE
[MULTIPLEX
COMMUNICATION
SYSTEM] )
Vehicle without climate
control unit.
Check code 04
TNS relay ON/OFF signal
STEP
INSPECTION
CONDITION
DISPLAY
ACTION
2008 Mazda CX-9 Grand Touring
2008 BODY & ACCESSORIES Instrumentation/Driver Info - Mazda CX-9
Microsoft
Sunday, November 15, 2009 10:42:27 AM
Page 26
© 2005 Mitchell Repair Information Company, LLC.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст