Mazda CX-9 Grand Touring. Manual — part 391
Fig. 20: Identifying Rear Over Fender With Clips
Courtesy of MAZDA MOTORS CORP.
FRONT UNDER COVER REMOVAL/INSTALLATION
FRONT UNDER COVER A
1. Remove the bolts.
2. Remove the screws.
3. Remove the front under cover A.
4. Install in the reverse order of removal.
2008 Mazda CX-9 Grand Touring
2008 ACCESSORIES & BODY, CAB Exterior Trim - Mazda CX-9
Microsoft
Sunday, November 15, 2009 10:44:03 AM
Page 16
© 2005 Mitchell Repair Information Company, LLC.
Fig. 21: Identifying Front Under Cover A With Screws, Bolts & Torque Specifications
Courtesy of MAZDA MOTORS CORP.
FRONT UNDER COVER B
1. Remove the screws.
2. Remove the fasteners.
3. Remove the front under cover B.
4. Install in the reverse order of removal.
Fig. 22: Identifying Front Under Cover B With Screws And Bolts
Courtesy of MAZDA MOTORS CORP.
SPLASH SHIELD REMOVAL/INSTALLATION
1. Remove the front over fender. (See OVER FENDER REMOVAL/INSTALLATION.)
2. Remove the bolts.
3. Remove the fasteners A.
4. Remove the splash shield.
5. Install in the reverse order of removal.
2008 Mazda CX-9 Grand Touring
2008 ACCESSORIES & BODY, CAB Exterior Trim - Mazda CX-9
Microsoft
Sunday, November 15, 2009 10:44:03 AM
Page 17
© 2005 Mitchell Repair Information Company, LLC.
Fig. 23: Identifying Splash Shield, Fasteners & Torque Specifications
Courtesy of MAZDA MOTORS CORP.
SAIL GARNISH REMOVAL/INSTALLATION
1. Pull the sail garnish outward and detach clips A from the body.
2. Remove the sail garnish.
3. Install in the reverse order of removal.
Fig. 24: Identifying Sail Garnish With Clips
Courtesy of MAZDA MOTORS CORP.
SIDE GARNISH REMOVAL
FRONT
1. Pull the side garnish and remove clip A from the vehicle body.
2. Slide the side garnish to the vehicle rear and remove clips B and C from the side garnish.
3. Remove the side garnish.
4. Remove clips B and C from the body, then install it to the side garnish.
2008 Mazda CX-9 Grand Touring
2008 ACCESSORIES & BODY, CAB Exterior Trim - Mazda CX-9
Microsoft
Sunday, November 15, 2009 10:44:03 AM
Page 18
© 2005 Mitchell Repair Information Company, LLC.
Fig. 25: Identifying Front Side Garnish With Clips
Courtesy of MAZDA MOTORS CORP.
REAR
1. Pull the side garnish and remove clip A from the vehicle body.
2. Slide the side garnish to the vehicle rear and remove clips B and C from the side garnish.
3. Remove the side garnish.
4. Remove clips B and C from the body, then install it to the side garnish.
Fig. 26: Identifying Rear Side Garnish With Clips
Courtesy of MAZDA MOTORS CORP.
SIDE GARNISH INSTALLATION
FRONT
1. Install clips A and then B to the vehicle from the front side.
2008 Mazda CX-9 Grand Touring
2008 ACCESSORIES & BODY, CAB Exterior Trim - Mazda CX-9
Microsoft
Sunday, November 15, 2009 10:44:03 AM
Page 19
© 2005 Mitchell Repair Information Company, LLC.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст