Mazda CX-9 Grand Touring. Manual — part 395
Fig. 4: Tapping Locknut
Courtesy of MAZDA MOTORS CORP.
5. Tap the nut with a copper hammer to loosen the drive shaft from the front wheel hub.
6. Separate the drive shaft from the wheel hub.
Fig. 5: Tapping Drive Shaft
Courtesy of MAZDA MOTORS CORP.
BRAKE CALIPER REMOVAL NOTE
1. Remove the brake caliper component from the steering knuckle and suspend it out of the way using a
cable.
Fig. 6: Identifying Brake Caliper
2008 Mazda CX-9 Grand Touring
2008 DRIVELINE/AXLE Front Axle - Mazda CX-9
Microsoft
Sunday, November 15, 2009 9:53:51 AM
Page 4
© 2005 Mitchell Repair Information Company, LLC.
Courtesy of MAZDA MOTORS CORP.
WHEEL HUB REMOVAL NOTE
1. Remove the wheel hub using the SSTs.
Substitution SST
49G033105
Outer diameter: 37-43 mm {1.5-1.6 in}
Fig. 7: Removing Wheel Hub With SSTs
Courtesy of MAZDA MOTORS CORP.
2. If the bearing inner race remains on the front wheel hub component, grind a section of the bearing inner
race until approx. 0.5 mm {0.02 in} remains. Then remove it using a chisel.
Fig. 8: Grinding Wheel Hub
Courtesy of MAZDA MOTORS CORP.
WHEEL BEARING REMOVAL NOTE
1. Remove the wheel bearing using the SSTs.
2008 Mazda CX-9 Grand Touring
2008 DRIVELINE/AXLE Front Axle - Mazda CX-9
Microsoft
Sunday, November 15, 2009 9:53:51 AM
Page 5
© 2005 Mitchell Repair Information Company, LLC.
Substitution SST
49G033 106
Outer diameter: 54-63 mm {2.2-2.4 in}
Fig. 9: Removing Wheel Bearing With SSTs
Courtesy of MAZDA MOTORS CORP.
DUST COVER REMOVAL NOTE
1. Mark the dust cover and steering knuckle for proper installation.
Fig. 10: Identifying Dust Cover Mark Location
Courtesy of MAZDA MOTORS CORP.
2. Remove the dust cover using a chisel.
NOTE:
The dust cover does not need to be removed unless it is being replaced.
2008 Mazda CX-9 Grand Touring
2008 DRIVELINE/AXLE Front Axle - Mazda CX-9
Microsoft
Sunday, November 15, 2009 9:53:51 AM
Page 6
© 2005 Mitchell Repair Information Company, LLC.
Fig. 11: Tapping Dust Cover
Courtesy of MAZDA MOTORS CORP.
WHEEL HUB BOLT REMOVAL NOTE
1. Remove the hub bolt using a press.
Fig. 12: Pressing Hub Bolt
Courtesy of MAZDA MOTORS CORP.
WHEEL HUB BOLT INSTALLATION NOTE
1. Install the new hub bolt using a press.
NOTE:
The hub bolts do not need to be removed unless they are being replaced.
2008 Mazda CX-9 Grand Touring
2008 DRIVELINE/AXLE Front Axle - Mazda CX-9
Microsoft
Sunday, November 15, 2009 9:53:51 AM
Page 7
© 2005 Mitchell Repair Information Company, LLC.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст