Mazda CX-9 Grand Touring. Manual — part 473
Fig. 35: Identifying Console With Accessory Socket Connector, Auxiliary Jack Connector &
Torque Specifications
Courtesy of MAZDA MOTORS CORP.
CONSOLE DISASSEMBLY/ASSEMBLY
1. Disassemble in the order indicated in the table.
Fig. 36: Identifying Console Components
Courtesy of MAZDA MOTORS CORP.
2. Assemble in the reverse order of disassembly.
DECORATION PLATE REMOVAL NOTE
2008 Mazda CX-9 Grand Touring
2008 BODY & ACCESSORIES Interior Trim - Mazda CX-9
Microsoft
Sunday, November 15, 2009 10:43:26 AM
Page 25
© 2005 Mitchell Repair Information Company, LLC.
1. Slide the decoration plate towards the vehicle front as shown in the figure, then pull out the pin and hooks
and remove the decoration plate.
Fig. 37: Sliding Decoration Plate
Courtesy of MAZDA MOTORS CORP.
DECORATION PANEL REMOVAL/INSTALLATION
1. Detach clips A and pin B by pulling them in the direction of the arrow.
2. Remove the decoration panel.
3. Install in the reverse order of removal.
Fig. 38: Identifying Decoration Panel With Pin & Clips
Courtesy of MAZDA MOTORS CORP.
CONSOLE PANEL REMOVAL/INSTALLATION
RH
1. Remove the decoration panel (RH). (See DECORATION PANEL REMOVAL/INSTALLATION.)
2. Remove the dashboard under cover (Passenger side). (See DASHBOARD UNDER COVER
REMOVAL/INSTALLATION.)
3. Detach clips A and B, and hooks by pulling them in the direction of the arrow.
2008 Mazda CX-9 Grand Touring
2008 BODY & ACCESSORIES Interior Trim - Mazda CX-9
Microsoft
Sunday, November 15, 2009 10:43:26 AM
Page 26
© 2005 Mitchell Repair Information Company, LLC.
4. Remove the console panel.
5. Install in the reverse order of removal.
Fig. 39: Identifying RH Console Panel With Clips & Hooks
Courtesy of MAZDA MOTORS CORP.
LH
1. Remove the decoration panel (LH). (See DECORATION PANEL REMOVAL/INSTALLATION.)
2. Remove the dashboard under cover (Driver side). (See DASHBOARD UNDER COVER
REMOVAL/INSTALLATION.)
3. Remove the side wall. (See SIDE WALL REMOVAL/INSTALLATION.)
4. Remove the fastener.
5. Detach clips A and B, and hooks by pulling them in the direction of the arrow.
6. Remove the console panel.
7. Install in the reverse order of removal.
Fig. 40: Identifying LH Console Panel With Clips & Hooks
Courtesy of MAZDA MOTORS CORP.
A-PILLAR TRIM REMOVAL/INSTALLATION
1. Partially peel back the seaming welt.
2008 Mazda CX-9 Grand Touring
2008 BODY & ACCESSORIES Interior Trim - Mazda CX-9
Microsoft
Sunday, November 15, 2009 10:43:26 AM
Page 27
© 2005 Mitchell Repair Information Company, LLC.
2. Pull the A-pillar trim shown in the figure in the direction of the arrow, raise clip B from its grommet
together with the A-pillar trim, and remove clips A at the same time.
Fig. 41: Identifying A-Pillar Trim & Clips
Courtesy of MAZDA MOTORS CORP.
3. Slide the A-pillar trim in the direction of the arrow shown in the figure and remove the A-pillar trim from
clip B.
Fig. 42: Sliding A-Pillar Trim
Courtesy of MAZDA MOTORS CORP.
4. Rotate and pull clip B in the direction of the arrow shown in the figure until it is no longer loose, and
feels tight.
5. Pull clip B and remove it from the grommet.
2008 Mazda CX-9 Grand Touring
2008 BODY & ACCESSORIES Interior Trim - Mazda CX-9
Microsoft
Sunday, November 15, 2009 10:43:26 AM
Page 28
© 2005 Mitchell Repair Information Company, LLC.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст