Mazda CX-9 Grand Touring. Manual — part 497
Fig. 23: Terminals Continuity Chart
Courtesy of MAZDA MOTORS CORP.
Fig. 24: Checking Continuity Between Door Lock Switch Terminals
Courtesy of MAZDA MOTORS CORP.
FRONT DOOR LOCK ACTUATOR INSPECTION
1. Apply battery positive voltage and connect ground to the corresponding front door lock actuator
terminals, and inspect the front door lock actuator operation.
If not as specified, replace the front door latch and lock actuator.
FRONT DOOR LOCK ACTUATOR REFERENCE
Lock actuator operation
Connection
B+ GND
Lock
1A
1B
Unlock
1B
1A
2008 Mazda CX-9 Grand Touring
2008 BODY & ACCESSORIES Security and Locks - Mazda CX-9
Microsoft
Sunday, November 15, 2009 10:47:58 AM
Page 15
© 2005 Mitchell Repair Information Company, LLC.
Fig. 25: Identifying Front Door Lock Actuator Connector Terminals
Courtesy of MAZDA MOTORS CORP.
DOOR LOCK STRIKER REMOVAL/INSTALLATION
1. Remove the screws, then remove the door lock striker.
2. Install in the reverse order of removal.
3. Adjust the door. (See DOOR ADJUSTMENT .)
Fig. 26: Identifying Door Lock Striker With Screw & Torque Specifications
Courtesy of MAZDA MOTORS CORP.
DOOR LOCK-LINK SWITCH INSPECTION
FRONT/REAR
1. Inspect for continuity between the door lock-link switch terminals.
If not as specified, replace the front door latch and lock actuator.
2008 Mazda CX-9 Grand Touring
2008 BODY & ACCESSORIES Security and Locks - Mazda CX-9
Microsoft
Sunday, November 15, 2009 10:47:58 AM
Page 16
© 2005 Mitchell Repair Information Company, LLC.
Fig. 27: Terminals Continuity Chart
Courtesy of MAZDA MOTORS CORP.
Fig. 28: Checking Continuity Between Door Lock-Link Switch Terminals
Courtesy of MAZDA MOTORS CORP.
REAR DOOR LATCH & LOCK ACTUATOR REMOVAL/INSTALLATION
1. Disconnect the negative battery cable.
2. Remove the following parts:
1. Inner sail garnish. (See INNER SAIL GARNISH REMOVAL/INSTALLATION .)
2. Rear door trim (See REAR DOOR TRIM REMOVAL/INSTALLATION .)
3. Rear door speaker (See REAR DOOR SPEAKER REMOVAL/INSTALLATION .)
4. Rear door glass (See REAR DOOR GLASS REMOVAL/INSTALLATION .)
5. Rear door module (See REAR DOOR MODULE REMOVAL/INSTALLATION .)
3. Remove in the order indicated in the table.
Fig. 29: Identifying Rear Door Latch & Lock Actuator, Connector, Screws & Torque Specifications
Courtesy of MAZDA MOTORS CORP.
2008 Mazda CX-9 Grand Touring
2008 BODY & ACCESSORIES Security and Locks - Mazda CX-9
Microsoft
Sunday, November 15, 2009 10:47:58 AM
Page 17
© 2005 Mitchell Repair Information Company, LLC.
4. Install in the reverse order of removal.
REAR DOOR LATCH AND LOCK ACTUATOR INSPECTION
1. The following actuator and switch are integrated with the rear door latch and lock actuator. Inspect the
rear door latch and lock actuator according to each inspection procedure for the following items.
Rear door lock actuator (See REAR DOOR LOCK ACTUATOR INSPECTION.)
Rear door latch switch (See DOOR LOCK-LINK SWITCH INSPECTION.)
Fig. 30: Checking Rear Door Latch & Lock Actuator
Courtesy of MAZDA MOTORS CORP.
REAR DOOR LOCK ACTUATOR INSPECTION
1. Apply battery positive voltage and connect ground to the corresponding front door lock actuator
terminals, and inspect the front door lock actuator operation.
If not as specified, replace the front door latch and lock actuator.
REAR DOOR LOCK ACTUATOR REFERENCE
Lock actuator operation
Connection
B+ GND
Lock
1A
1B
Unlock
1B
1A
2008 Mazda CX-9 Grand Touring
2008 BODY & ACCESSORIES Security and Locks - Mazda CX-9
Microsoft
Sunday, November 15, 2009 10:47:58 AM
Page 18
© 2005 Mitchell Repair Information Company, LLC.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст