Mazda CX-9 Grand Touring. Manual — part 573
3A
Slide motor
output (forward)
Slide motor
While slide motor is
moving to forward
B+
Slide motor
Related wiring
harness
Other
1.0 or less
3B
Slide motor
output
(backward)
Slide motor
While slide motor is
moving to backward
B+
Slide motor
Related wiring
harness
Other
1.0 or less
3C
Front tilt motor
output (up)
Front tilt
motor
While front tilt motor is
moving to up
B+
Front tilt
motor
Related wiring
harness
Other
1.0 or less
3D
Front tilt motor
output (down)
Front tilt
motor
While front tilt motor is
moving to down
B+
Front tilt
motor
Related wiring
harness
Other
1.0 or less
3E
Rear tilt motor
output (up)
Rear tilt motor
While rear tilt motor is
moving to up
B+
Rear tilt motor
Related wiring
harness
Other
1.0 or less
3F
Rear tilt motor
output (down)
Rear tilt motor
While rear tilt motor is
moving to down
B+
Rear tilt motor
Related wiring
harness
Other
1.0 or less
3G
Recliner motor
output (forward)
Recliner motor
While recliner motor is
moving to forward
B+
Recliner
motor
Related wiring
harness
Other
1.0 or less
3H
Recliner motor
output
(backward)
Recliner motor
While recliner motor is
moving to backward
B+
Recliner
motor
Related wiring
harness
Other
1.0 or less
3I
Slide motor
power supply
Slide motor
Slide motor moving
B+
Slide motor
Related wiring
harnesses
Slide motor stopped
1.0 or less
3J
Slide motor
pulse
Slide motor
Measure the waveform
while driving motor
operation using the
oscilloscope.
High
output: 4.8
or more
Slide motor
Related wiring
harnesses
Low
output: 1.0
or less
Slide motor stopped
1.0 or less
or 5.0
Front tilt motor moving
B+
Front tilt
2008 Mazda CX-9 Grand Touring
2008 BODY & ACCESSORIES Seats - Mazda CX-9
Microsoft
Sunday, November 15, 2009 10:40:01 AM
Page 22
© 2005 Mitchell Repair Information Company, LLC.
POSITION MEMORY SWITCH INSPECTION
1. Disconnect the position memory switch connector.
2. Inspect for continuity between the power seat switch connector terminals.
If not as specified, replace the position memory switch.
3K
Front tilt motor
power supply
Front tilt
motor
Front tilt motor stopped
1.0 or less
motor
Related wiring
harnesses
3L
Front tilt motor
pulse
Front tilt
motor
Measure the waveform
while driving motor
operation using the
oscilloscope.
High
output: 4.8
or more
Front tilt
motor
Related wiring
harnesses
Low
output: 1.0
or less
Front tilt motor stopped
1.0 or less
or 5.0
3M
Rear tilt motor
power supply
Rear tilt motor
Rear tilt motor moving
B+
Rear tilt motor
Related wiring
harnesses
Rear tilt motor stopped
1.0 or less
3N
Rear tilt motor
pulse
Rear tilt motor
Measure the waveform
while driving motor
operation using the
oscilloscope.
High
output: 4.8
or more
Rear tilt motor
Related wiring
harnesses
Low
output: 1.0
or less
Rear tilt motor stopped
1.0 or less
or 5.0
3O
Recliner motor
power supply
Recliner motor
Recliner motor moving
B+
Recliner
motor
Related wiring
harnesses
Recliner motor stopped
1.0 or less
3P
Recliner motor
pulse
Recliner motor
Measure the waveform
while driving motor
operation using the
oscilloscope.
High
output: 4.8
or more
Recliner
motor
Related wiring
harnesses
Low
output: 1.0
or less
Recliner motor stopped
1.0 or less
or 5.0
2008 Mazda CX-9 Grand Touring
2008 BODY & ACCESSORIES Seats - Mazda CX-9
Microsoft
Sunday, November 15, 2009 10:40:01 AM
Page 23
© 2005 Mitchell Repair Information Company, LLC.
Fig. 27: Position Memory Switch Continuity Chart
Courtesy of MAZDA MOTORS CORP.
Fig. 28: Position Memory Switch - Circuit Diagram
Courtesy of MAZDA MOTORS CORP.
SEAT WARMER UNIT INSPECTION
SEAT CUSHION
1. Remove the front seat. (See FRONT SEAT REMOVAL/INSTALLATION.)
2. Remove the seat cushion trim. (See FRONT SEAT DISASSEMBLY/ASSEMBLY.)
3. While inspecting for continuity between the connector terminals A and B, use a dryer to warm the
thermostat of the seat warmer unit on seat cushion.
2008 Mazda CX-9 Grand Touring
2008 BODY & ACCESSORIES Seats - Mazda CX-9
Microsoft
Sunday, November 15, 2009 10:40:01 AM
Page 24
© 2005 Mitchell Repair Information Company, LLC.
Fig. 29: Checking Thermostat With Air Gun
Courtesy of MAZDA MOTORS CORP.
4. When the ohmmeter indicates that there is no continuity, turn off the dryer, then use a thermometer to
measure the temperature of the thermostat.
5. Verify that the temperature is approx. 43°C {109°F}.
Fig. 30: Identifying Thermostat Connector
Courtesy of MAZDA MOTORS CORP.
6. Using an ohmmeter, verify that there is continuity between the seat warmer unit connector terminals
when temperature drops to approx. 34°C {93°F}.
If not as indicated in the table, replace the seat warmer unit.
2008 Mazda CX-9 Grand Touring
2008 BODY & ACCESSORIES Seats - Mazda CX-9
Microsoft
Sunday, November 15, 2009 10:40:01 AM
Page 25
© 2005 Mitchell Repair Information Company, LLC.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст