Mazda CX-9 Grand Touring. Manual — part 551
Fig. 9: Identifying Steering Lock Unit Terminals
Courtesy of MAZDA MOTORS CORP.
VOLTAGE SPECIFICATION
Terminal
Signal name
Connected to
Measured
condition
Voltage
(V)
Inspection item(s)
C
Interior light
power supply
BCM
Ignition key
illumination
Under any
condition
B+
Ignition key illumination
bulb
BCM (See BODY
CONTROL MODULE
(BCM) INSPECTION )
Related wiring harnesses
D
Ignition key
illumination
control
BCM
Ignition key
illumination
Ignition switch
off and driver
side door
opened.
1.0 or
less
Ignition key illumination
bulb
BCM (See BODY
CONTROL MODULE
(BCM) INSPECTION )
Related wiring harnesses
15 s or more
after all doors
closed.
B+
E
Push switch
signal
Keyless control
module
Start knob
pressed
B+
Keyless control module
(See KEYLESS
CONTROL MODULE
INSPECTION
[ADVANCED
KEYLESS SYSTEM] )
Related wiring harnesses
Start knob
released
1.0 or
less
F
Power supply
BCM
Under any
condition
B+
BCM (See BODY
CONTROL MODULE
(BCM) INSPECTION )
Related wiring harnesses
G
Key reminder
switch signal
Keyless control
module
Key inserted
B+
Keyless control module
(See KEYLESS
CONTROL MODULE
INSPECTION
1.0 or
2008 Mazda CX-9 Grand Touring
2008 ACCESSORIES & BODY, CAB Power Systems - Mazda CX-9
Microsoft
Sunday, November 15, 2009 10:41:28 AM
Page 5
© 2005 Mitchell Repair Information Company, LLC.
RELAY LOCATION
Key removed
less
[ADVANCED
KEYLESS SYSTEM] )
Related wiring harnesses
I
Power supply
BCM
Under any
condition
B+
BCM (See BODY
CONTROL MODULE
(BCM) INSPECTION )
Related wiring harnesses
K
Serial
communication
Keyless control
module
Because this terminal is
for communication,
good/no good judgment
by terminal voltage is not
possible.
Keyless control module
(See KEYLESS
CONTROL MODULE
INSPECTION
[ADVANCED
KEYLESS SYSTEM] )
Related wiring harnesses
L
GND
Body ground
Under any
condition
1.0 or
less
Related wiring harnesses
2008 Mazda CX-9 Grand Touring
2008 ACCESSORIES & BODY, CAB Power Systems - Mazda CX-9
Microsoft
Sunday, November 15, 2009 10:41:28 AM
Page 6
© 2005 Mitchell Repair Information Company, LLC.
Fig. 10: Identifying Relay Location
Courtesy of MAZDA MOTORS CORP.
RELAY INSPECTION
RELAY TYPE
RELAY TYPE REFERENCE
Terminal type
Part name
Main relay No. 1
Fuel pump relay
Rear window defroster relay
2008 Mazda CX-9 Grand Touring
2008 ACCESSORIES & BODY, CAB Power Systems - Mazda CX-9
Microsoft
Sunday, November 15, 2009 10:41:28 AM
Page 7
© 2005 Mitchell Repair Information Company, LLC.
TYPE A
1. Verify the continuity between the relay terminals.
If not as indicated in the table, replace the relay.
Fig. 11: Relay Terminals Continuity Chart (Type A)
Courtesy of MAZDA MOTORS CORP.
4 terminals
Type A
Starter relay
Back-up light relay
A/C relay
TNS relay
Horn relay
Seat warmer relay RH
H/L HI relay
Main relay No.2
H/L LOW relay
Seat warmer relay LH
Front fog light relay
Type B
Front blower relay
Rear blower relay
Fan relay
Cooling fan relay No.1
Cooling fan relay No.2
2008 Mazda CX-9 Grand Touring
2008 ACCESSORIES & BODY, CAB Power Systems - Mazda CX-9
Microsoft
Sunday, November 15, 2009 10:41:28 AM
Page 8
© 2005 Mitchell Repair Information Company, LLC.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст