Mazda Training manual — part 97
Dynamic Driving Safety Systems
DSC
Parts Location
L2003_02027
1
ABS warning light
8
Steering angle sensor
2
DSC indicator light
9
DSC OFF switch
3
DSC OFF indicator light
10
DSC HU/CM
4
Brake system warning light
11
Front ABS wheel-speed sensor
5
Combined sensor
12
Front ABS pulse rotor
6
Rear ABS pulse rotor
13
PCM
7
Rear ABS wheel-speed sensor
Curriculum Training
02-47
DSC
Dynamic Driving Safety Systems
Wiring Diagram
L2003_02028
02-48 Curriculum
Training
Dynamic Driving Safety Systems
DSC
1
ABS fuse 1
14
Combined sensor
2
ABS fuse 2
15
Steering angle sensor
3
ABS ignition fuse
16
ABS wheel-speed sensor LR
4
Brake system warning light
17
ABS wheel-speed sensor RR
5
ABS warning light
18
ABS wheel-speed sensor LF
6
DSC OFF indicator light
19
ABS wheel-speed sensor RF
7
DSC indicator light
20
Battery
8
CAN driver
21
Ignition switch
9 IC
22 Solenoid
valves
10 PCM
23 CAN
H
11 DLC-2
24 CAN
L
12
DSC OFF switch
25
CAN2 L
13 DSC
HU/CM
26 CAN2
H
Curriculum Training
02-49
DSC
Dynamic Driving Safety Systems
Hydraulic Circuit
•
The HU for DSC is equipped with 12 solenoid valves that can be activated for the ABS,
TCS and DSC operation. It has two more solenoid valves than a vehicle with four
channel ABS and TCS. The additional valves are the stability control solenoid valves,
which are closed when not actuated by the CM. One valve is used for each brake circuit.
They are in line with the brake master cylinder and the suction side of the pump in the
HU. This ensures that a sufficient amount of brake fluid is available during DSC
operation.
LF-RR
RF-LR
LF-RR
RF-LR
LF
RF
LR
RR
LF
RF
LR
RR
Pump motor
OFF (stopped)
L2003_T02015
Outlet solenoid valve
OFF (closed)
OFF (open)
Stability control solenoid valve
OFF (closed)
OFF (open)
Traction control solenoid valve
Inlet solenoid valve
02-50 Curriculum
Training
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст