Mazda Training manual — part 191
TC001-18-01H
INTRODUCTION TO M-MDS
04 - Retrieving and Clearing DTCs
Activity 04- Page 4
Activity 04
(Continued)
- OR -
Tap PDS Tools if it is displayed, then tap PDS.
6. The PDS Establishing Communications screen
flashes on then off. This screen indicates the
PDA is connecting to the VCM via the USB
network.
7. Tap the
New Vehicle icon.
TC001-18-01H
INTRODUCTION TO M-MDS
04 - Retrieving and Clearing DTCs
Activity 04- Page 5
Activity 04
(Continued)
8. Select
16 pin, then tap tick.
9. Turn the ignition key to Key On Engine Off
(KOEO), then tap tick.
10. Watch
the
following Establishing
Communication screen flash on then off.
CAUTION
If you do not turn the ignition key ON,
you will need to perform a soft reset
on your PDA and reboot the VCM.
TC001-18-01H
INTRODUCTION TO M-MDS
04 - Retrieving and Clearing DTCs
Activity 04- Page 6
Activity 04
(Continued)
11. Verify the vehicle information is correct,
then tap YES.
12. If desired, leave the fields empty or tap data
into any of the fields, then tap tick.
13. If this screen displays, tap NO.
NOTE
This is an optional screen and you
may not see it.
TC001-18-01H
INTRODUCTION TO M-MDS
04 - Retrieving and Clearing DTCs
Activity 04- Page 7
Activity 04
(Continued)
14. Tap
Module Tests if it is not highlighted,
then tap tick.
15. Tap
tick.
Retrieve DTCs
16. Tap
Self Test if it is not highlighted, then tap
tick.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст