Mazda Training manual — part 197
TC001-18-01H
INTRODUCTION TO M-MDS
06 - Making DataLogger Recordings
Activity 06- Page 5
Activity 06
(Continued)
10. If desired, leave the fields empty or tap data
into any of the fields, then tap tick.
11. If this screen displays, tap NO.
12. Tap
Module Tests if it is not highlighted, then
tap tick.
NOTE
This is an optional screen and you
may not see it.
TC001-18-01H
INTRODUCTION TO M-MDS
06 - Making DataLogger Recordings
Activity 06- Page 6
Activity 06
(Continued)
13. Tap
tick.
14. Tap
Data Logger, then tap tick.
15. This screen flashes on then off.
TC001-18-01H
INTRODUCTION TO M-MDS
06 - Making DataLogger Recordings
Activity 06- Page 7
Activity 06
(Continued)
16. Tap
Clear to clear preselected PIDs. Use the scroll bar on the right to
view all available PIDS.
17. Select the following PIDs, then tap tick:
•
APP1 (VOLT)
•
TP1 (VOLT)
•
APP2 (VOLT)
•
TP2 (VOLT)
You are now in the active PID display. Use the scroll bar on the right to view all
available PIDs as needed.
18. Slowly move the vehicle’s
accelerator pedal from idle to wide
open and then back to idle.
19. Immediately after releasing the
accelerator pedal
tap
Data Capture to record
the data.
TC001-18-01H
INTRODUCTION TO M-MDS
06 - Making DataLogger Recordings
Activity 06- Page 8
Activity 06
(Continued)
19. Tap
Playback.
20. Tap the recording pop-up
data that appears in the
lower right corner.
Recording
Tap
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст