Mazda Training manual — part 188

TC001-18-01H

INTRODUCTION TO M-MDS
02 - Installing PFM & PDS

Activity 02- Page 17

Activity 02
(Continued)

NOTE

PDS will now update the VCM. You will see the following screens. Follow the
screen instructions and tap tick as needed.

35. Tap

tick.

36. This screen flashes on then off.

TC001-18-01H

INTRODUCTION TO M-MDS
02 - Installing PFM & PDS

Activity 02- Page 18

Activity 02
(Continued)

37. Tap

tick.

38. Follow the screen

instructions.

PDS and the VCM are now ready to use.

Conclusion:

In this activity, you installed PDS and updated a new VCM.

Instructor Sign-off: ____________________________________

TC001-18-01H

INTRODUCTION TO M-MDS
03 - PDA Navigation

Activity 03- Page 1

Activity 03: PDA Navigation

Upon completing this activity you will be able to:

•

Navigate a PDA using “screen taps”

•

View battery status

•

Adjust screen brightness

•

Adjust screen “on time”

What you need to complete this activity:

•

Mazda-approved PDA with PDS installed

Procedure:

1. Press the power button to turn ON the PDA.




















2. Slide the stylus out of its location on the back of the PDA. The stylus replaces the

computer mouse. To open a menu or select an item, tap the screen once with
the stylus.

CAUTION

Use the stylus or soft cap from a pen on the touch screen. You can damage the
touch screen if you use the tip of a mechanical pencil or other sharp item.

Stylus

Power button

Main screen
(touch screen)

Your PDA and PDA’s main
screen may look slightly
different than this example.

TC001-18-01H

INTRODUCTION TO M-MDS
03 - PDA Navigation

Activity 03- Page 2

Activity 03
(Continued)

3. Tap Start at the top of the main screen.














4. Tap Settings from the drop-down menu.















5. Tap the System tab at the bottom of the

Settings screen.