Mazda Protege 5. Manual — part 322
SECURITY AND LOCKS
09–14–3
09–14
End Of Sie
FRONT DOOR LOCK AND OPENER REMOVAL/INSTALLATION
A3U091458311W01
1. Close the front door glass completely.
2. Disconnect the negative battery cable.
3. Remove the front door trim. (See 09–17–9 FRONT DOOR TRIM REMOVAL/INSTALLATION.)
4. Remove in the order indicated in the table.
5. Install in the reverse order of removal.
End Of Sie
FRONT DOOR LOCK ACTUATOR INSPECTION
A3U091458310W01
1. Remove the front door trim.
2. Turn the door screen over.
3. Disconnect the front door lock actuator connector.
4. Apply battery positive voltage to the front door lock actuator terminals and inspect the operation of the front
door lock actuator.
•
If not as specified, replace the front door lock.
End Of Sie
FRONT DOOR LOCK ACTUATOR REMOVAL/INSTALLATION
A3U091458310W02
1. Disconnect the negative battery cable.
2. Remove the door screen. (See 09–14–3 FRONT DOOR LOCK AND OPENER REMOVAL/INSTALLATION.)
3. Disconnect the front door lock actuator connector.
4. Disconnect the rods from the outer handle and the door key cylinder.
5. Remove the screws, and then remove the front door lock.
6. Remove the screws, and then remove the front door lock actuator from the front door lock.
7. Install in the reverse order of removal.
End Of Sie
1
Inner handle
2
Door screen
3
Front door lock
4
Door lock knob
5
Outer handle
6
Door key cylinder
X3U914WA0
Connection
Actuator operation
B+
GND
E
B
Lock
B
E
Unlock
Z3U0914W010
1712-1U-01G(09-14).fm 3 ページ 2001年6月29日 金曜日 午前10時32分
SECURITY AND LOCKS
09–14–4
DOOR LOCK-LINK SWITCH INSPECTION
A3U091458211W01
Note
•
The door lock-link switch is together with the driver-side door lock actuator.
1. Remove the driver-side door trim.
2. Turn the door screen over.
3. Disconnect the door lock-link switch connector.
4. Inspect for continuity between the door lock-link switch terminals using an ohmmeter.
•
If not as specified, replace the door lock actuator.
End Of Sie
DOOR LOCK-LINK SWITCH REMOVAL/INSTALLATION
A3U091458211W02
Note
•
The door lock-link switch is together with the driver-side door lock actuator.
1. Remove the driver-side door lock actuator. (See 09–14–3 FRONT DOOR LOCK ACTUATOR REMOVAL/
INSTALLATION.)
End Of Sie
REAR DOOR LOCK AND OPENER REMOVAL/INSTALLATION
A3U091472311W01
1. Close the rear door glass completely.
2. Disconnect the negative battery cable.
3. Remove the rear door trim. (See 09–17–9 REAR DOOR TRIM REMOVAL/INSTALLATION.)
4. Remove in the order indicated in the table.
5. Install in the reverse order of removal.
End Of Sie
Z3U0914W011
Z3U0914W012
1
Inner handle
2
Door lock knob
3
Door screen
4
Rear door lock
5
Outer handle
X3U914WA2
1712-1U-01G(09-14).fm 4 ページ 2001年6月29日 金曜日 午前10時32分
SECURITY AND LOCKS
09–14–5
09–14
REAR DOOR LOCK ACTUATOR INSPECTION
A3U091472310W01
1. Remove the rear door trim.
2. Turn the door screen over.
3. Disconnect the rear door lock actuator connector.
4. Apply battery positive voltage to the rear door lock actuator terminals and inspect the operation of the rear door
lock actuator.
•
If not as specified, replace the rear door lock.
End Of Sie
REAR DOOR LOCK ACTUATOR REMOVAL/INSTALLATION
A3U091472310W02
1. Disconnect the negative battery cable.
2. Remove the door screen. (See 09–14–4 REAR DOOR LOCK AND OPENER REMOVAL/INSTALLATION.)
3. Disconnect the rear door lock actuator connector.
4. Disconnect the rod from the outer handle.
5. Remove the screws, and then remove the rear door lock.
6. Remove the screws, and then remove the rear door lock actuator from the rear door lock.
7. Install in the reverse order of removal.
End Of Sie
LIFTGATE LOCK ACTUATOR INSPECTION
A3U091462310W01
1. Disconnect the liftgate lock actuator connector.
2. Apply battery positive voltage to the liftgate lock
actuator terminals and inspect the operation of
the liftgate lock actuator.
•
If not as specified, replace the liftgate lock.
End Of Sie
LIFTGATE LOCK ACTUATOR REMOVAL/INSTALLATION
A3U091462310W02
1. Disconnect the negative battery cable.
2. Remove the liftgate lock.
3. Remove the screws, then remove the liftgate lock
actuator.
4. Install in the reverse order of removal.
End Of Sie
Connection
Actuator operation
B+
GND
E
B
Lock
B
E
Unlock
Z3U0914W013
Connection
Actuator operation
B+
GND
B
A
Lock
A
B
Unlock
A3U0914W003
A3U0914W002
1712-1U-01G(09-14).fm 5 ページ 2001年6月29日 金曜日 午前10時32分
SECURITY AND LOCKS
09–14–6
DOOR KEY CYLINDER SWITCH INSPECTION
A3U091475911W01
1. Raise the door glass completely.
2. Disconnect the negative battery cable.
3. Remove the passenger-side front door trim.
4. Remove the door screen.
5. Disconnect the door key cylinder switch connector.
6. Inspect for continuity between the door key cylinder switch terminals using an ohmmeter.
•
If not as specified, replace the door key cylinder switch.
End Of Sie
DOOR KEY CYLINDER SWITCH REMOVAL/INSTALLATION
A3U091475911W02
1. Close the door glass completely.
2. Disconnect the negative battery cable.
3. Remove the passenger-side front door trim.
4. Remove the door screen.
5. Release the outer handle and the door key cylinder installation rods.
6. Disconnect the door key cylinder switch
connector.
7. Remove the door key cylinder switch.
8. Install in the reverse order of removal.
End Of Sie
DOOR LOCK SWITCH INSPECTION
A3U091466210W01
1. Remove the door lock switch.
2. Inspect for continuity between the door lock switch terminals using an ohmmeter.
•
If not as specified, replace the door lock switch.
End Of Sie
Z3U0914W014
X3U914WC7
X3U914WA5
Y3U914WA3
X3U914WA7
1712-1U-01G(09-14).fm 6 ページ 2001年6月29日 金曜日 午前10時32分
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст