Mazda Protege 5. Manual — part 236
SYMPTOM TROUBLESHOOTING
05–03–3
05–03
Y3U503WA0
1712-1U-01G(05-03).fm 3 ページ 2001年6月29日 金曜日 午前10時8分
SYMPTOM TROUBLESHOOTING
05–03–4
FS Engine
Z3U0140W103
1712-1U-01G(05-03).fm 4 ページ 2001年6月29日 金曜日 午前10時8分
SYMPTOM TROUBLESHOOTING
05–03–5
05–03
End Of Sie
Z3U0140W104
1712-1U-01G(05-03).fm 5 ページ 2001年6月29日 金曜日 午前10時8分
SYMPTOM TROUBLESHOOTING
05–03–6
FOREWORD
A3U050301030W02
•
When the customer reports a vehicle malfunction, check the malfunction indicator light (MIL) indication, O/D
OFF indicator light flashing, and PCM memory for diagnostic trouble code (DTC), then diagnose the
malfunction according to following flowchart.
— If the DTC exists, diagnose the applicable DTC. (See 05–02–7 DTC TABLE.)
— If the DTC does not exist and the MIL does not illuminate and no O/D OFF indicator light flashes, diagnose
the applicable symptom troubleshooting. (See 05–03–7 AUTOMATIC TRANSAXLE SYMPTOM
TROUBLESHOOTING ITEM TABLE.)
*
: Malfunction Indicator Light (MIL), O/D OFF indicator light
End Of Sie
AUTOMATIC TRANSAXLE BASIC INSPECTION
A3U050301030W03
YMU102WBX
STEP
INSPECTION
ACTION
1
•
Turn ignition switch on.
•
When selector lever is moved, is the selector
illumination synchronized with the lever
location? Also, when other ranges are
selected from N or P during idling, does
vehicle creep within 1 to 2 seconds?
Yes
Go to next step.
No
Inspect selector lever and TR switch. Repair or replace
defected areas.
(See 05–18–2 SELECTOR LEVER INSPECTION.)
(See 05–17–20 TRANSAXLE RANGE (TR) SWITCH
INSPECTION.)
If selector lever and TR switch are okay, go to next step.
2
•
Inspect ATF color and condition.
(See 05–17–17 AUTOMATIC TRANSAXLE
FLUID (ATF) INSPECTION.)
•
Are ATF color and odor normal?
Yes
Go to next step.
No
Repair or replace any defective parts according to
inspection result.
Flush automatic transaxle and cooler line as necessary.
3
•
Perform the line pressure test.
(See 05–17–12 Line Pressure Test.)
•
Is line pressure okay?
Yes
Go to next step.
No
Adjust accelerator cable as necessary.
Repair or replace any defective parts according to
inspection result.
4
•
Perform the stall test.
(See 05–17–13 Stall Test.)
•
Is stall speed okay?
Yes
Go to next step.
No
Repair or replace any defective parts according to
inspection result.
1712-1U-01G(05-03).fm 6 ページ 2001年6月29日 金曜日 午前10時8分
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст