Mazda X-5. Manual — part 69
ON-BOARD DIAGNOSTIC [SJ6A-EL]
05–02–5
05–02
P0961
Line pressure control
solenoid range/
performance (stuck)
• Feedback current corresponding to
solenoid current command value is
irregular when engine is running.
• Emergency mode
• Inhibits self learning control
• Inhibits driver adaptive shift control
• Inhibits TCC control
P0962
Line pressure control
solenoid circuit malfunction
(short to ground/open
circuit)
• Open or short circuit in line pressure
control solenoid signal system (while
TCM monitors solenoid output voltage,
the voltage that differs from the signal
output by CPU in TCM is detected).
• Emergency mode
• Inhibits self learning control
• Inhibits driver adaptive shift control
• Inhibits TCC control
P0963
Line pressure control
solenoid circuit malfunction
(short to power)
• Short circuit in line pressure control
solenoid signal system (while TCM
monitors solenoid output voltage, the
voltage that differs from the signal
output by CPU in TCM is detected).
• Emergency mode
• Inhibits self learning control
• Inhibits driver adaptive shift control
• Inhibits TCC control
P0969
Shift solenoid F range/
performance (stuck)
• Feedback current corresponding to
solenoid current command value is
irregular when engine is running.
• Emergency mode
• Inhibits self learning control
• Inhibits driver adaptive shift control
• Inhibits TCC control
P0970
Shift solenoid F circuit
malfunction (short to
ground/open circuit)
• Open or short circuit in shift solenoid F
signal system (while TCM monitors
solenoid output voltage, the voltage
that differs from the signal output by
CPU in TCM is detected).
• Emergency mode
• Inhibits self learning control
• Inhibits driver adaptive shift control
• Inhibits TCC control
P0971
Shift solenoid F circuit
malfunction (short to
power)
• Short circuit in shift solenoid F signal
system (while TCM monitors solenoid
output voltage, the voltage that differs
from the signal output by CPU in TCM
is detected).
• Emergency mode
• Inhibits N—D shift pressure control
• Inhibits self learning control
• Inhibits driver adaptive shift control
• Inhibits TCC control
P0973
Shift solenoid A circuit
malfunction (short to
ground)
• Short to ground in shift solenoid A
signal system (while TCM monitors
solenoid output voltage, the voltage
that differs from the signal output by
CPU in TCM is detected).
• Emergency mode
• Inhibits self learning control
• Inhibits driver adaptive shift control
• Inhibits TCC control
P0974
Shift solenoid A circuit
malfunction (short to
power/open circuit)
• Open or short circuit in shift solenoid A
signal system (while TCM monitors
solenoid output voltage, the voltage
that differs from the signal output by
CPU in TCM is detected).
• Emergency mode
• Inhibits self learning control
• Inhibits driver adaptive shift control
• Inhibits TCC control
P0976
Shift solenoid B circuit
malfunction (short to
ground)
• Short to ground in shift solenoid B
signal system (while TCM monitors
solenoid output voltage, the voltage
that differs from the signal output by
CPU in TCM is detected).
• Emergency mode
• Inhibits self learning control
• Inhibits driver adaptive shift control
• Inhibits TCC control
P0977
Shift solenoid B circuit
malfunction (short to
power/open circuit)
• Open or short circuit in shift solenoid B
signal system (while TCM monitors
solenoid output voltage, the voltage
that differs from the signal output by
CPU in TCM is detected).
• Emergency mode
• Inhibits self learning control
• Inhibits driver adaptive shift control
• Inhibits TCC control
P0979
Shift solenoid C circuit
malfunction (short to
ground)
• Short to ground in shift solenoid C
signal system (while TCM monitors
solenoid output voltage, the voltage
that differs from the signal output by
CPU in TCM is detected).
• Emergency mode
• Inhibits self learning control
• Inhibits driver adaptive shift control
• Inhibits TCC control
P0980
Shift solenoid C circuit
malfunction (short to
power/open circuit)
• Open or short circuit in shift solenoid C
signal system (while TCM monitors
solenoid output voltage, the voltage
that differs from the signal output by
CPU in TCM is detected).
• Emergency mode
• Inhibits self learning control
• Inhibits driver adaptive shift control
• Inhibits TCC control
P0982
Shift solenoid D circuit
malfunction (short to
ground)
• Short to ground in shift solenoid D
signal system (while TCM monitors
solenoid output voltage, the voltage
that differs from the signal output by
CPU in TCM is detected).
• Emergency mode
• Inhibits self learning control
• Inhibits driver adaptive shift control
• Inhibits TCC control
DTC
No.
On-board diagnostic
function
Detection condition
Fail-safe
ON-BOARD DIAGNOSTIC [SJ6A-EL]
05–02–6
P0983
Shift solenoid D circuit
malfunction (short to
power/open circuit)
• Open or short circuit in shift solenoid D
signal system (while TCM monitors
solenoid output voltage, the voltage
that differs from the signal output by
CPU in TCM is detected).
• Emergency mode
• Inhibits self learning control
• Inhibits driver adaptive shift control
• Inhibits TCC control
P0985
Shift solenoid E circuit
malfunction (short to
ground)
• Short to ground in shift solenoid E
signal system (while TCM monitors
solenoid output voltage, the voltage
that differs from the signal output by
CPU in TCM is detected).
• Emergency mode
• Inhibits self learning control
• Inhibits driver adaptive shift control
• Inhibits TCC control
P0986
Shift solenoid E circuit
malfunction (short to
power/open circuit)
• Open or short circuit in shift solenoid E
signal system (while TCM monitors
solenoid output voltage, the voltage
that differs from the signal output by
CPU in TCM is detected).
• Emergency mode
• Inhibits self learning control
• Inhibits driver adaptive shift control
• Inhibits TCC control
P2719
Shift solenoid G range/
performance (stuck)
• Feedback current corresponding to
solenoid current command value is
irregular when engine is running.
• Emergency mode
• Inhibits self learning control
• Inhibits driver adaptive shift control
• Inhibits TCC control
P2720
Shift solenoid G circuit
malfunction (short to
ground/open circuit)
• Open or short circuit in shift solenoid G
signal system (while TCM monitors
solenoid output voltage, the voltage
that differs from the signal output by
CPU in TCM is detected).
• Emergency mode
• Inhibits self learning control
• Inhibits driver adaptive shift control
• Inhibits TCC control
P2721
Shift solenoid G circuit
malfunction (short to
power)
• Short circuit in shift solenoid G signal
system (while TCM monitors solenoid
output voltage, the voltage that differs
from the signal output by CPU in TCM
is detected).
• Emergency mode
• Inhibits self learning control
• Inhibits driver adaptive shift control
• Inhibits TCC control
P2757
Torque converter clutch
(TCC) stuck on
• TCM detects that TCC control solenoid
does not change from on when engine
is running
• Inhibits acceleration from 2GR
P2758
Torque converter clutch
(TCC) stuck off
• TCM detects that TCC control solenoid
does not change from off when engine
is running
N/A
P2762
TCC control solenoid
range/performance (stuck)
• Feedback current corresponding to
solenoid current command value is
irregular when engine is running.
• Inhibits acceleration from 2GR
• Inhibits TCC control
P2763
TCC control solenoid
circuit malfunction (short to
power)
• Short circuit in TCC control solenoid
signal system (while TCM monitors
solenoid output voltage, the voltage
that differs from the signal output by
CPU in TCM is detected).
• Inhibits acceleration from 2GR
• Inhibits TCC control
P2764
TCC control solenoid
circuit malfunction (short to
ground/open circuit)
• Open or short circuit in TCC control
solenoid signal system (while TCM
monitors solenoid output voltage, the
voltage that differs from the signal
output by CPU in TCM is detected).
• Inhibits acceleration from 2GR
• Inhibits TCC control
U0073
CAN BUS OFF
• Bus off error is detected.
• Inhibits self learning control
• Inhibits driver adaptive shift control
• Inhibits TCC control
• Inhibits 5GR, 6GR
U0100
TCM cannot receive any
signals from PCM
• Communication error is detected
between TCM and PCM.
• Inhibits self learning control
• Inhibits driver adaptive shift control
• Inhibits TCC control
• Inhibits 5GR, 6GR
DTC
No.
On-board diagnostic
function
Detection condition
Fail-safe
ON-BOARD DIAGNOSTIC [SJ6A-EL]
05–02–7
05–02
Emergency Mode
• Emergency mode shifts as follows when in D range or R position.
End Of Sie
PARAMETER IDENTIFICATION (PID) DATA MONITORING FUNCTION [SJ6A-EL]
E5U050200000N07
• The PID mode allows access to certain data values, analog and digital input and output, calculations and
system state information.
Monitor Item Table
End Of Sie
Condition
Selector lever position
D range
R
position
Normal shifting
1GR
2GR
3GR
4GR
5GR
6GR
Reverse
When there is any malfunction in shift
solenoids A, B, C, D, E, F, G, line
pressure, or TCC control solenoid
4GR
Reverse
Display on the tester
Definition
Unit/Condition
TCM terminal
BOO TCM
Brake switch
On/Off
N/A
DTCCNT
DTC count (includes those needing no action)
N/A
N/A
DWN SW
Down switch
On/Off
2F
ECT TCM
Engine coolant temperature
°C
N/A
FDPDTC
Freeze frame data
N/A
N/A
GEAR_RA
Gear ratio
N/A
N/A
GEAR_SEL
Calculated gear range in TCM
1/2/3/4/5/6
N/A
LPS
Line pressure control solenoid
A
1E, 1R
MNL SW
M range switch
On/Off
2G
OSS
Output shaft speed
RPM
2C, 2D
PNP_TCM
Park/Neutral
Drive/Neutral
2K, 2M, 2N, 2O
RPM TCM
Engine speed
RPM
N/A
SS SW-
Steering shift switch (shift down)
On/Off
2AB, 2AF
SS SW+
Steering shift switch (shift up)
On/Off
2AB, 2AF
SSA
Shift solenoid A
On/Off
1AF
SSB
Shift solenoid B
On/Off
1AB
SSC
Shift solenoid C
On/Off
1AA
SSD
Shift solenoid D
On/Off
1S
SSE
Shift solenoid E
On/Off
1V
SSF
Shift solenoid F
A
1O, 1Z
SSG
Shift solenoid G
A
1L, 1Y
TCCC
TCC control solenoid
A
1D, 1Q
TFT
ATF temperature
°C
1J, 1M
TFTV
ATF temperature signal voltage
V
1J, 1M
THOP
Throttle position
%
N/A
TR
TR switch
R/N/D/P
2K, 2M, 2N, 2O
TRD
TR switch [D range]
On/Off
2K
TRR
TR switch [R position]
On/Off
2M
TSS
Input/turbine speed sensor
RPM
2A, 2B
UP SW
Up switch
On/Off
2J
VPWR_TCM
Battery voltage
V
1AD
VSS
Vehicle speed
KPH
2C, 2D
ON-BOARD DIAGNOSTIC [SJ6A-EL]
05–02–8
SIMULATION FUNCTION [SJ6A-EL]
E5U050200000N08
• By using the WDS or equivalent, simulation items for input/output parts preset in the TCM can be optionally
selected and operated regardless of TCM control conditions.
Simulation Item Table
X: Available
End Of Sie
DLC-2 OUTLINE [SJ6A-EL]
E5U050200000N09
• A connector (DLC-2) conforming to International Organization for Standardization (ISO) standards has been
added.
• Shape and terminal arrangement as stipulated by the ISO 15031-3 (SAE J1962) international standard has
been adopted for this connector. The connector has a 16-pin construction that includes the B+, CAN_H,
CAN_L, GND1, GND2 and KLN terminals.
End Of Sie
Simulation
item
Applicable component
Unit/Condition
Operation
TCM terminal
IG ON
Idle
LPS
Line pressure control solenoid
A
N/A
X
1E, 1R
SSA
Shift solenoid A
On/Off
N/A
X
1AF
SSB
Shift solenoid B
On/Off
N/A
X
1AB
SSC
Shift solenoid C
On/Off
N/A
X
1AA
SSD
Shift solenoid D
On/Off
N/A
X
1S
SSE
Shift solenoid E
On/Off
N/A
X
1V
SSF
Shift solenoid F
A
N/A
X
1O, 1Z
SSG
Shift solenoid G
A
N/A
X
1L, 1Y
TCCC
TCC control solenoid
A
N/A
X
1D, 1Q
Terminal
Function
B+
Battery power supply terminal
CAN_L
Serial communication Lo terminal
CAN_H
Serial communication Hi terminal
GND1
Body ground terminal
GND2
Serial communication ground terminal
KLN
Serial communication terminal (malfunction diagnosis use)
B+
CAN_L
GND1
CAN_H GND2
DLC-2
KLN
D6U502BS7004
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст